• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1197-1204
• /
• 2008

강원도 남부(영월)와 충북 제천, 단양 등지에 널리 분포하는 석회암에서 유래된 토양은 점토 및 철분함량이 많은 식질계 토양이며 pH와 염기포화도(Base Saturation)가 높은 붉은색 토양이다. 이 토양은 식양질과 식질 등의 세립(細粒)질로만 구성이 되어 있고 자갈이 있는 토양으로 분류된다. 따라서, 토양의 침투 및 투수속도가 우리나라 토양의 주 모재인 화강암이나 화강편마암 유래 토양과는 다른 양상을 보인다. 본 연구는 세립질 특성을 보이는 석회암 유래 토양의 지표면에서의 침투속도와 토양층위별 투수속도를 측정해 복잡하게 세분되어 있는 토양의 종류를 수문학적인 목적에 따라 단순화하기 위해 만든 수문학적 토양유형을 분류하고자 하였다. 실험을 위해 이용된 토양은 과림, 모산, 장성, 마지, 안미, 평안통의 6개 토양이었고 장력 침투계(Disc tension infiltrometer)와 투수속도 측정계(Guelph permeameter)로 침투 및 투수속도를 측정했다. 현장측정 이후 추정식의 개발을 위해 토양층위별로 시료를 채취하여 실험실조건에서 입도분포, 유기물함량을 측정했다. 토양통별 침투 및 투수속도를 측정한 결과는 유기물 층이 존재하는 과림통은 공극이 많고 토층 내에 나무 및 식물뿌리가 존재해 전체적으로 침투 및 투수속도가 빠른 특성을 보여 수문유형을 A로 분류되었다. 모산통은 토층 내에 자갈함량이 아주 높고 투수속도가 다른 토양에 비해 월등히 빠른 특성을 나타냈으나 50cm이내에서 암반층이 존재하는 관계로 수문유형이 C로 분류되었다. 토층이 깊지 않은 장성통은 토층 내에 나무 및 식물뿌리가 많고 암석노출지가 존재해 침투속도가 빠름에도 불구하고 C 수문유형으로 분류됐다. 자갈이나 잔돌이 많은 마지통은 잔자갈이 존재하고 침투나 투수속도가 빠른 편으로 A유형이었다. 논으로 사용되는 안미통은 다른 석회암 유래토양에 비해 토층이 깊은 편이며 석회암 충적층에서 유래된 토양으로 선상지 및 곡간지에 분포한다. 관개된 상태에서 로타리 작업에 의해 표토의 특성이 교란되는 논으로 이용되는 특성 때문에 침투 및 투수속도는 느려 C유형으로 분류됐다. 잔돌이 존재하는 평안통은 석회암 붕적, 퇴적층으로부터 유래된 토양으로 산록경사지 및 선상단구에 분포하며 표토층인 A층에서 중입상구조를 보이며 공극이 많고 작물뿌리가 매우 많아 침투속도는 빠르나 B층에서는 점토 함량이 감소했다 증가하면서 토성이 급격히 바뀌는 특성을 나타내 투수속도는 느린 값을 보였으나 수분학적 토양유형은 B유형으로 분류됐다.

• Economic and Environmental Geology
• /
• v.51 no.6
• /
• pp.493-507
• /
• 2018

The Wooseok deposit in Jecheon belongs to the Hwanggangri Mineralized Distict of the northeastern Ogcheon Metamorphic Belt. Its geology consists mostly of limestone of the Choseon Supergroup and the Cretaceous Muamsa granite intruded at the eastern area of the deposit. The deposit shows vertical occurrence of skarn and hydrothermal vein ores with W-Mo-Fe and Cu-Pb-Zn mineralization and skarn is developed only at lower levels of the deposit. Skarn minerals are replaced or cut by ore minerals in paragenetic sequence of magnetite-hematite, molybdenite-scheelite-wollframite, and higher abundances of pyrrhotite-chalcopyrite-pyrite-sphalerite-galena. Garnet has chemical compositions of $Ad_{65.9-97.8}Gr_{0.3-32.0}Pyr_{0.9-3.0}$, corresponding to andradite series, and pyroxene compositions are $Hd_{4.5-49.7}Di_{42.3-93.9}Jo_{0.5-7.9}$, prevailing in diopside compositions, both of which suggest oxidized conditions of skarnization. On the FeS-MnS-CdS ternary diagram, FeS contents of sphalerite in vein ores decrease with increasing MnS contents from bottom to top levels, possibly relating to W mineralization in deep and Pb-Zn mineralization in shallow level. Sulfur isotope values of sulfide minerals range from 5.1 to 6.8‰, reflecting magmatic sulfur affected by host rocks. W-Mo skarn and Pb-Zn vein mineralization in the Wooseok deposit were established by spatio-temporal variation of decreasing temperature and oxygen fugacity with increasing sulfur fugacity from bottom to top levels.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.103-109
• /
• 2009

Soils originated from limestone, located at the southern part of Kangwon province and Jecheon, Danyang of Chungbuk province are mainly composed of fine texture, and have different properties from soils originated from granite and granite gneiss, especially for water movement. This study was conducted for classification of hydrologic soil group (HSG) of soils originated from limestone by measuring the infiltration rate of surface soils and percolation rate of sub soils. Soils used for the experiment were 6 soils in total : Gwarim, Mosan, Jangseong, Maji, Anmi and Pyongan series. Infiltration and percolation rate were measured by a disc tension infiltrometer and a Guelph permeameter, respectively. Particle size distribution and organic matter content of the soils were analyzed. HSG, which was made by USDA NRCS(National Resources Conservation Service) for hydrology, of Gwarim series with O horizon of accumulated organic matter was classified as type A which show the properties of low runoff potential, rapid infiltration and percolation rate. HSG of Mosan series, which has high gravel content and very rapid permeability, was classified as type B/D because of the impermaeble base rock layer under 50cm from surface. HSG of Jangseong series with shallow soil depth was classified as type C/D owing to the impermaeble base rock layer under 50cm from surface. HSG of Maji series was type B, and HSG of Anmi series used as paddy land was type D because of slow infiltration and percolation rate caused by the disturbance of surface soil by puddling. HSG of Pyeongan series having a sudden change of layer in soil texture was type D because of the slow percolation rate caused a the layer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.132-138
• /
• 2009

Soils originated from limestone, located at the southern part of Kangwon province and Jecheon, Danyang of Chungbuk province are mainly composed of fine texture, have different properties from soils originated from granite and granite gneiss, especially for water movement. This study was conducted for making PTF(Pedo-Transfer Function) for Kfs(field saturaton hydraulic conductivity) estimation, and for investigating the relation between soil particle distribution and the infiltration and percolation rate in soils originated from limestone. Soils used for the experiment were 6 soils of Gwarim, Mosan, Jangseong, Maji, Anmi and Pyongan series. Infiltration and percolation rate for the soil were measured by a disc tension infiltrometer and a Guelph permeameter, respectively. The particle size distribution and organic matter content of the soils were analyzed. Kfs was not related with sand, silt, clay, and organic mattrer (OM) content because of forest soils which contained high gravel, pebble, and cobble content, and O layer with high OM content. After Mosan soil series and O layer of Gwarim series were excluded for the data analysis, Kfs was explained as a linear function with sand and clay content and a exponential function with OM content. As a result, the PTF equation was obtained as Kfs=-4.20558+0.479706*(S)+0.023187*exp(1.829*OM) ($R^2=0.6558^{*}$).