• Korean Journal of Microbiology
• /
• v.54 no.1
• /
• pp.9-17
• /
• 2018

To investigate the role of bkdR, sigL, yplP, and des genes which were known to be involved in fatty acid synthesis and sensitive at low temperature, deletion mutants of Bacillus subtilis CU1065 and JH642 were constructed. To determine the low temperature sensitivity of these genes, we compared the growth curves of cells at $37^{\circ}C$ and $15^{\circ}C$. At $37^{\circ}C$, wild type and deletion mutants showed almost similar growth but only bkdR deletion strain at $15^{\circ}C$ showed very slow growing compared with wild type. At $15^{\circ}C$ sigL and yplP deletions were somewhat slower or similar to those of wild type strain. Double and triple mutants for bkdR, sigL, yplP deletions were constructed and grown at $20^{\circ}C$ in LB agar to investigate cold sensitive growth. Double or triple deletions including bkdR deletion showed cold sensitive growing. In order to identify more clearly cold sensitive growth, the experiments were carried out under cold shock conditions in which the temperature was lowered from $37^{\circ}C$ to $15^{\circ}C$ at the point of 0.4 optical densities at 600 nm. In these cold shock experiments, only bkdR deletion showed significantly lower growing and additional des deletion increases cold sensitivity. The bkdR activates the bkd operon, which catabolized isoleucine, valine and leucine, amino acids and produce precursors for the synthesis of branched fatty acids. At cold shock growing of bkdR deletion strain, isoleucine recovered cold sensitivity of bkdR deletion but valine did not restore cold sensitivity. Isoleucine is used as a precursor for the synthesis of anteiso-branched fatty acids. On the other hand, valine is used as a precursor for the synthesis of iso-branched fatty acids. This indicates that anteiso-branched fatty acid plays an important role at the cold shock condition.

• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.127-136
• /
• 1996

Mak-kimchi (shredded kimchi) which was prepared in a commercial factory was packed in bottle (200 g) under vacuum (560 mmHg) or atmosphere, and chemical characteristics and microbiological parameters were monitored during storage at 5, 15 and $25^{\circ}C$, respectively. Optimum ripening time of the kimchi at different temperature were 2 days at $25^{\circ}C$, 5 days at $15^{\circ}C$ and more than 60 days at $5^{\circ}C$. By vacuum treatment pH and acidity changes in kimchi were considerably retarded. The vacuum of each bottle released within 1 or 2 days at 25 or $15^{\circ}C$, respectively but the pack at $5^{\circ}C$ maintained more than 380 mmHg vacuum for 36 days and then the vacuum slowly released. The colour of kimchi (lightness, redness, yellowness) in bottle increased sharply at $25^{\circ}C$ and $15^{\circ}C$ but sustained a stable level with vacuum treatment at $5^{\circ}C$. The range of total viable count of kimchi in bottle was $10^7{\sim}10^{10}/ml$. The number decreased by storage temperature drop to $5^{\circ}C$ and even more vacuum treatment than atmosphere treatment at $5^{\circ}C$. Lactobacillus brevis, L. plantarum, L. acidophilus, Aerococcus viridans and Streptococcus faecium subsp. casseliflavus were identified in bottled kimchi and L. brevis and L. plantarum contributed to the main function during kimchi fermentation. Those main lactic acid bacteria decreased in numbers at $5^{\circ}C$ than 25 or $15^{\circ}C$ and even more declined in case of vacuum treatment.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.62-70
• /
• 2018

This study investigates, the physicochemical characteristics of Sengmaksan (SM) prepared with Liriope platyphylla (LP) that had been roasted for different times (0, 30, 60, and 90 min, denoted as S-0, S-30, S-60, and S-90, respectively) The Hunter's color values such as lightness (L), redness (a), and yellowness (b) were the highest in S-0, while the lowest was found in S-90. The amount of soluble solid and reducing sugar content of S-60 were higher than the others. None of the samples exhibit significant differences in, their pH and acidity. The total content of phenolic compounds increased with the LP roasting time, but the total flavonoid and total anthocyanin contents of the SM decreased at the same time. The total ginsenoside (Ro, Rb2, Re, Rf, Rg1, Rg2, Rg3, Rh1, and Rh2) content did not show significant differences. The DPPH and ABTS radical scavenging activities increased according to the concentration, as well as with the LP roasting time. The ferric reducing antioxidant power (FRAP) showed trends similar to the radical scavenging activity, but it was more sensitive to the LP roasting time. From these results, the active ingredient in S-60 was higher, and the antioxidant activities of SM increased along with the roasting time of LP.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2010

The aim of this study was to analyse the quality of Yukwa puffed by using a vacuum puffing machine and compare to deep-fried Yukwa. The effect of vacuum puffing condition including heating temperature(100-${160^{\circ}C}$), preheating time(0-8 min) and vacuum puffing time(5-20 min) on physical and microstructure characteristics of the Yukwa was investigated. Vacuum puffed Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 10 min puffing time had highest value in volumetric expansion ratio(10.04) and lowest value in bulk density(0.15 g/$cm^{3}$). The breaking strength showed the lowest value of 140 g/$cm^{3}$ in vacuum puffing Yukwa at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time. The Yukwa puffed with the vacuum puffing machine at ${100^{\circ}C}$ heating temperature, 6 min preheating time and 15 min puffing time had the higher value of bulk density and the lower value of volumetric expansion ratio than those of deep-fried Yukwa. Increasing preheating time and vacuum puffing time caused an increase in white and an decrease in yellowness. The vacuum-puffed Yukwa exhibited smaller and uniform cell structure, while deep-fried Yukwa exhibited apparently in larger pores inside and smaller pores near the surface layer. The optimum condition of vacuum puffing machine for the production of vacuum-puffing Yukwa was ${120^{\circ}C}$ heating temperature, 4 min preheating time and 5 min puffing time.

• Clean Technology
• /
• v.25 no.1
• /
• pp.91-97
• /
• 2019

Oxidative desulfurization (ODS) has received much attention in recent years because refractory sulfur compounds such as dibenzothiophenes can be oxidized selectively to their corresponding sulfoxides and sulfones, and these products can be removed by extraction and adsorption. In this work, The oxidative desulfurization of marine diesel fuel was performed in a batch reactor with hydrogen peroxide ($H_2O_2$) in the presence of various supported heteropoly acid catalysts. The catalysts were characterized by XRD, XRF, XPS and nitrogen adsorption isotherm techniques. Based on the sulfur removal efficiency of promising silica supported heteropoly acid catalysts, the ranking of catalytic activity was: $30\;H_3PW_{12}/SiO_2$ > $30\;H_3PMo_{12}/SiO_2$ > $30\;H_4SiW_{12}/SiO_2$, which appears to be related with their intrinsic acid strength. The $30\;H_3PW_{12}/SiO_2$ catalyst showed the highest initial sulfur removal efficiency of about 66% under reaction conditions of $30^{\circ}C$, $0.025g\;mL^{-1}$ (cat./oil), 1 h reaction time. However, through the recycle test of the $H_3PW_{12}/SiO_2$ catalyst, significant deactivation was observed, which was attributed to the elution of the active component $H_3PW_{12}$. By introducing cesium cation ($Cs^+$) into the $H_3PW_{12}/SiO_2$ catalyst, the stability of the catalyst was improved with changing the solubility, and the $Cs^+$ ion exchanged catalyst could be recycled for at least five times without severe elution.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.689-698
• /
• 2021

Since the mine reclamation scheme was implemented from 2007 in Korea, various remediation programs have been decontaminated the pollution associated with mining and 254 mines were managed to reclamation from 2011 to 2015. However, as the total amount of contaminated mine drainage has been increased due to the discovery of potential hazards and contaminated zone, more efficient and economical treatment technology is required. Therefore, in this study, the adsorption properties of arsenic was evaluated according to the adsorbents which were derived from water treatment sludge(Alum based adsorbent, ABA-500) and granular ferric hydroxide(GFH), already commercialized. The alum sludge and GFH adsorbents consisted of aluminum, silica materials and amorphous iron hydroxide, respectively. The point of zero charge of ABA-500 and GFH were 5.27 and 6.72, respectively. The result of the analysis of BET revealed that the specific surface area of GFH(257 m²·g^-1) was larger than ABA-500(126~136 m²·g^-1) and all the adsorbents were mesoporous materials inferred from N₂ adsorption-desorption isotherm. The adsorption capacity of adsorbents was compared with the batch experiments that were performed at different reaction times, pH, temperature and initial concentrations of arsenic. As a result of kinetic study, it was confirmed that arsenic was adsorbed rapidly in the order of GFH, ABA-500(granule) and ABA-500(3mm). The adsorption kinetics were fitted to the pseudo-second-order kinetic model for all three adsorbents. The amount of adsorbed arsenic was increased with low pH and high temperature regardless of adsorbents. When the adsorbents reacted at different initial concentrations of arsenic in an hour, ABA-500(granule) and GFH could remove the arsenic below the standard of drinking water if the concentration was below 0.2 mg·g^-1 and 1 mg·g^-1, respectively. The results suggested that the ABA-500(granule), a low-cost adsorbent, had the potential to field application at low contaminated mine drainage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.9-16
• /
• 2022

Rice is one of the most important staple foods in Wnju, Jeonbuk, South Korea. However, rice consumption has dramatically decreased as eating habits have diversified owing to rapid economic growth. Recently, floury endosperm rice varieties have been developed to invigorate the rice processing industry, because dry-milled rice flour is economically and environmentally suitable for massive rice flour distribution. The National Institute of Crop Science has developed 'AromaT', an early-maturing black rice with floury-endosperm, suitable for tea and dry milling. 'AromaT' was derived from a cross between 'Suweon542' as the floury endosperm source and 'Heugjinju' as the black and aromatic source. In this study, 'AromaT' and its parents, 'Suweon542' and 'Heugjinju', were analyzed for agronomic traits, anthocyanin content, and their major physicochemical properties by different planting date. The field experiment was conducted in Wanju, Jeollabuk-do Province, South Korea, in 2019. The transplanting dates were May 30 (ordinary season), June 25 (double-cropping season), and July 10 (late season). The yield performance of brown rice 'AromaT' was 330 kg/10 a in the double-cropping cultivation method and was the highest among the transplanting dates. The floury endosperm of 'AromaT' was derived from 'Suweon542' containing 'flo7', located on chromosome 5 and known to control floury endosperm. With the late planting date, the anthocyanin content of 'AromaT' was 570.5 mg/100 g, much higher than that of 'Heugjinju' (376.3 mg/100 mg). The brown rice of 'AromaT' also exhibited the pop-corn-flavoring 2-acetyl-1-pyrroline, exclusively detected in aroma rice varieties. The average particle sizes of 'AromaT' and 'Suweon542' were 67.12 ㎛ and 70.9 ㎛, respectively, lower than that of 'Heugjinju' (95.5 ㎛) with a black transparent endosperm. The average damaged starch content of 'AromaT' was 8.1%, lower than that of 'Heugjinju' (10.05%) and Suweon542 (9.5%). As a result, 'AromaT' with high anthocyanin content, fine particle size, and low damaged starch content is expected to provide a new rice material in various processing fields.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.189-196
• /
• 2022

Plasma refers to an ionized gas that is often referred to as "the fourth phase of matter", following solid, liquid, and gas. Plasma has traditionally been utilized for industrial applications such as welding and neon signs, but its promise in biomedical fields such as cancer treatment and dermatology has lately been recognized. Indeed, due to its beneficial effects in promoting collagen production, improving skin tone, and eliminating harmful bacteria in the skin, plasma treatment constitutes an important target for dermatological research. In this study, a plasma device for cosmetic manufacturing based on nitrogen, the main component of the atmosphere, was designed and assembled. Moreover, nitric oxide (NO) was selected since is easier to follow and evaluate than other nitrogen plasma active species, and its contents were measured to perform a quantitative and qualitative evaluation of plasma. First, an injection method, using different proximities labeled "sinking" and "non sinking" treatments, was performed to test the most efficient plasma treatment method. As a result, it was observed that the formulation obtained by a non sinking treatment was more effective. Furthermore, toner and ampoule were selected as cosmetics formulations, and the characteristics of the formulation and changes in the injected plasma state were observed. In both formulations, the successful injection of NO plasma was 2 times higher in toner formulation than ampoule formulation, and it gradually decreased with time, having dissipated after a week. It was confirmed that the nitrogen plasma used did not affect the stability of the toner and ampoule formulations at low temperature (4 ℃), room temperature (25 ℃), and high temperature (37 ℃ and 50 ℃) conditions. The results of this study demonstrate the potential of plasma cosmetics and highlight the importance of securing the stability of the injected plasma.

• Asia Marketing Journal
• /
• v.10 no.1
• /
• pp.25-64
• /
• 2008

Third-Party awards are growing in popularity. They are the hit product of the year chosen by The Korea Economic Daily, the best 10 products of the year chosen by Sports paper, the best hit product chosen by consulting firm and the best venture company of the year chosen by Information and Communication Ministry. Then these questions may be followed. Why industry likes this type of advertisement? Does this type of advertisement influences consumers' purchase intention? And if it does, how? Many researchers have been interested in external cue of product quality by focusing research effort on brand, price, producer, warranty etc. However, important but under-explored area is the role of third-party reference for signaling product quality. This paper comes from the idea that the third-party reference may signal consumers like manufacturer brand, product brand, product price, and shop brand. We develop a related theories to address research questions and drive some research hypotheses based on the previous studies probing source credibility, attribution, and signal theory. We put more emphasis on source credibility. We conducted the research based on 3x2x2x2 between group factorial design to explore causal relationship between the third party award winning advertising(real, fictional, no) and the purchase intention of consumers exposed to other information simultaneously such as product type(experience, search), distribution channel(direct, indirect) and perceived price(high, low). Since subjects are divided into 2 groups based on the means of response without extra experimental stimulus in case of perceived price. 12 different advertisements are used for conducting this study. The results are followings. First, the source credibility of the third party goes up, consumers' purchase intention would go up. It seems that consumers think the credibility of the third-party most when they are exposed to the third party award winning advertisement. Second, the product type does moderate the relationship between the third-party award winning advertisement and purchase intention. And the type of the distribution channel also moderates this relationship. The consumers' purchase intention goes up higher when they buy experience good and there is significant difference of purchase intention when consumers are exposed to direct channel treatment condition. But, perceived price has nothing to do with the third-party winning advertisement context for raising consumer intention to buy advertised product.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.851-857
• /
• 2023

The purpose of this study is to investigate the effect of changes in collimation size and sub ROI on exposure index(EI) in hand radiography, present collimation size and EI suitable for average hand size of Koreans, and present the effect of changes in sub ROI on EI. The subjects of this study were hand-wrist phantom, and the exposure conditions were set to 55 kVp, 125, mA, and 6.25 mAs, and source to image receptor distance was applied to 110 cm. Based on the vendor recommended sub-ROI (18.7" × 18.7", 8" × 10", 8" × 7.4", 6" × 7.4")and the textbook's recommended sub-ROI 8" × 10", each obtaining 30 images, and comparing the EI shown in the equipment. The EI according to the change in the size of the collimation were 1663.7±4.52, 8"×10" is 1489.1±4.49, 8"×7.4" is 1716.9±3.00, 6"×7.4" is 168.7±3.66 for each EI, and the average value of each value was statistically significant. The average EI according to the sub ROI change was 1489.1±4.49 for SS, LS was 1694.8±5.19 for AEC, 2052.9±5.96, VR was 1548.3±3.20, and HR was 1663.2±4.33. The appropriate field size considering the hand size of Koreans was found to be 8"×7.4". In addition, when the field size increases based on the generally known field size (8"×10") during hand radiography, the EI value changes from a maximum of 15% to a minimum of 11%, and the sub ROI shape based on sub ROI 'SS' Depending on the change, the EI value increased from a maximum of 37% to a minimum of 3%.