• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1219-1225
• /
• 2005

This study was carried out to investigate the effects of preheating temperature on the properties of the Korean traditional pepper pickle. In experimental groups, the pepper was heated in the warm water at 40, 60, 80$^{\circ}C$ for 10 minutes while the control group was not heated. The contents of chlorophyll and vitamin C in treated pepper were evaluated. The contents of chlorophyll were 30.96$\∼$31.13 mg$\%$ at the initial stage of 0 day and 0.76$\∼$2.34 mg$\%$ for 60 days of storage. The vitamin C contents were increased until storage 6 days and then were decreased. Pickles treated at 60$^{\circ}C$ showed the highest score on hardness after 60 days of storage followed by 40$^{\circ}C$>no-heat treatment (NH)>80$^{\circ}C$. The yellowness on the surface of brined pepper peels was increased with preheating temperature increased. Activities of pectinesterase were the highest at 60$^{\circ}C$ followed by 40$^{\circ}C$>80$^{\circ}C$>NH treated. Activities of polygalacturonase were lower than that of NH group.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.5
• /
• pp.696-703
• /
• 2011

We performed a randomized placebo-controlled trial to determine whether or not fermented red ginseng supplementation modulates blood glucose and insulin resistance in type 2 diabetic patients. A total of 38 patients were randomized to either a fermented red ginseng group or placebo group. The patients in the experimental or placebo group consumed 780 mg of fermented red ginseng or cellulose supplement per day for 12 weeks, respectively. Lifestyle factors and dietary intakes of the patients were not altered during the 12-weeks period. In the fermented red ginseng group after 12 weeks, the fasting blood glucose levels were significantly decreased ($136.29{\pm}16.45$ mg/dL to $127.71{\pm}17.74$ mg/dL) and $HbA_1c$ was also decreased. Especially, high HbA1c (HbA1c $\geq$8%, $8.45{\pm}0.56%$ to $7.82{\pm}0.53%$) was significantly decreased compared to low HbA1c (HbA1c <8%, $6.71{\pm}0.85%$ to $6.44{\pm}0.49%$) in the fermented red ginseng group. Serum low-density lipoprotein was slightly decreased in the fermented red ginseng group compared to the placebo group. Homeostasis model assessment-insulin resistance was significantly reduced in the fermented red ginseng group compared to the placebo group. These results suggest that fermented red ginseng supplementation could be helpful to reduce blood glucose by improving insulin resistance in type 2 diabetic patients.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.1
• /
• pp.151-172
• /
• 1998

Over the past two decades, the process of globalization of multinational corporations has increased at a rapid rate. One manifestation of this process is the establishment of corporate head offices in a variety of international centers to administer and coordinate, the day-to-day operations in the host countries. In establishing a subsidiary overseas a firm creates a direct link between the operations of the domestic corporate center and the foreign host center This paper investigates elements of stability and change in the international linkage patterns among domestic parent corporations and host subsidiaries over the past several decades. In particular, it seeks answers to a number of question related to stability and change in linkages among foreign centers of control and those Canadian centers selected to administer the subsidiary operations from 1970 to 1991 over the four primary sectors, namely, resources, manufacturing, services, and finance. By confirming the core stability and dispersed linkages hypotheses, the papar offers some generalizations with respect to the location and stability of subsidiary headquarters centers in Canada and their respective subsector specialties. Finally, it addresses further research avenues fer the quaternary place study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.4
• /
• pp.235-242
• /
• 2012

Purpose: The purpose of this study was to compare the fracture behavior of Zironia, glass infiltrated Alumina and PFM full crown system. Materials and methods: Fifteen crowns for each of 3 experimental groups (Zironia, glass infiltrated Alumina and PFM full crown) were made by the conventional method. The crowns mounted on the testing jig were inclined in 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The mean fracture strengths were $588.3{\pm}49.6MPa$ for zirconia system, $569.1{\pm}61.8MPa$ for PFM system and $551.0{\pm}76.5MPa$ for glass-infiltrated alumina system (P>.05). 2. The mean shear bond strengths were $25.5{\pm}5.6MPa$ for zirconia system, $38.9{\pm}5.0MPa$ for Ni-Cr alloy system and $39.4{\pm}5.1MPa$ for glass-infiltrated alumina system. 3. The chemical bonding was observed at interfaces between PFM or glass-infiltrated alumina and veneering porcelain, however, no chemical bonding was observed at interface between zirconia and veneering porcelain. Conclusion: With the study, the fracture strengths of PFM crown system had a higher fracture strength than conventional zirconia system crown and glass-infiltrated alumina crowns. and than the shear bond strengths glass-infiltrated alumina system had a higher shear bond strength than conventional PFM system and zirconia system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.10
• /
• pp.1304-1308
• /
• 2006

The present study describes the preliminary evaluation of the antioxidant activity and the cytotoxic effect of Ceramium kondoi. The antioxidant activities and cytotoxic effect of the water extracts were evaluated by total phenolic contents (TPC), DPPH radical scavenging activity (RSA), reducing power (RP), comet assay, and MTT reduction assay. TPC, DPPH RSA, and RP of the extract at the concentration of $1,000{\mu}g/mL$ was $659.2{\mu}M$, 86.0%, and 1.084, respectively, and those were concentration dependent. The $200{\mu}M\;H_2O_2-induced$DNA damage was inhibited by C. kondoi water extract in a dose dependent manner in human leukocytes. The inhibition was by 62.3, 39.8, 24.8% and 16.4% at the concentration of 5, 10, $25{\mu}g/mL$ and $50{\mu}g/mL$, respectively. Cytotoxic activity on HT-29 cells and MCF-7 cells of the C. kondoi water extract at the concentration of $10{\mu}g/mL$ was 49% and 60%, respectively. These results strongly support the possibility of C. kondoi as a source of natural functional materials.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.4
• /
• pp.500-508
• /
• 2011

This study was carried out to investigate the effects of jujube extracts on intestinal microflora, along with their antioxidant activities, according to extraction method. The antimicrobial activities of the extracts were measured using the agar diffusion method with a jujube extract concentration of 50 mg/mL. Neither the first nor second jujube extracts were inhibitory against the tested intestinal bacteria. However, water extracts of jujube significantly enhanced the growth of lactic acid bacteria, especially Bifidobacterium bifidum and Bifidobacterium adolescentis. Total phenol compounds and flavonoid compounds were higher in the 1st than in the 2nd water extracts. The EDA values of both water and ethanol extracts increased in proportion to the extract concentration. The 1st water extract showed the highest value among all the others, which was 85.60% at the concentration of 0.05 mg/mL. Furthermore, the 1st water extract showed stronger antioxidant activity than the other samples with an activity of 679.91 mg AA eq/g. These results support the potential use of jujube water extracts as a functional food component and a valuable resource for the development of nutraceutical foods, to increase the growth of Bifidobacterium spp. in the human intestine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.226-226
• /
• 2008

지난 10여년 동안 Sn-3.0Ag-0.5(wt%)Cu 합금은 대표 무연솔더 조성으로 다양한 전자제품의 실장 및 접합에 적용되어 왔으며, 그 신뢰성 역시 충분히 검증된 바 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 내 충격 신뢰성을 보다 향상시키고자 하는 업계의 동향은 Ag의 함량이 낮은 무연솔더 조성의 적용 확대를 유도하고 있다. 이에 따라 본 연구자들은 저 Ag 함유 무연슬더로 Sn-1.2Ag-0.5Cu-0.4In 조성을 제안한 바 있는데, 이는 Sn-3.0Ag-0.5Cu 조성 이상의 solderability를 가지면서도 그 금속원료 가격이 약 20% 가량 저렴한 특징을 가진다. 또한 열 싸이클링 (cycling) 테스트를 통한 슬더 조인트의 신뢰성을 평가한 결과, Sn-3.0Ag-0.5Cu에 크게 뒤떨어지지 않는 양호한 특성이 관찰되었다. 따라서 본 연구에서는 열 싸이클링 테스트와 더불어 최근 그 중요성이 지속적으로 커지고 있는 내 충격 신뢰성 평가 시험을 실시하여 개발된 4원계 무연솔더 조성의 기계적 특성을 기존 무연솔더 조성과 비교, 분석해 보았다. 각 솔더 조성은 솔더 볼 형태로 제조되어 CSP(Chip Scale Package) 상에 범핑 (bumping)되었으며, CSP를 PCB(Printed Circuit Board) 상에 실장하는 공정에서도 Sn-3.0Ag-0.5Cu 및 Sn-1.2Ag-0.5Cu-0.4In의 두 종류의 솔더 페이스트가 사용되었다. 본 연구에서의 내 충격 신뢰성 시험에는 자체 제작한 rod drop 시험기를 사용하였는데, 고정된 CSP 실장 board의 후면 부위를 일정한 높이에서 추를 반복적으로 자유 낙하시켜 급격한 충격을 주는 방식으로 실험을 실시하였다. 이 때 추의 무게는 30g, 낙하 높이는 10cm 였으며, 추의 낙하 시 측정된 board 의 휨 변위량은 약 0.7mm로 측정되었다. 사용된 CSP와 PCB 는 모두 daisy chain 방식으로 연결되어 있기 때문에 저항측정기를 사용한 간단한 실시간 저항 측정 방법으로 시험 이력에 따른 파단부의 발생 시점과 대략의 위치를 손쉽게 확인할 수 있었다. 솔더 조인트의 파단 기준 저항값으로 $1000\Omega$을 설정하였으며. 각 조건 당 5 개 이상의 샘플에 대해 평가를 실시한 후 그 평균값을 조사하였다. 시험 결과 제안된 Sn-1.2Ag-0.5Cu-0.4In 조성은 대표적인 저 Ag 함유 조성인 Sn-1.0Ag-0.5Cu에 비해서는 떨어지는 내 충격 신뢰성을 나타내었지만, 우수한 연성에 기인하여 Sn-3.0Ag-0.5Cu 조성에 비해서는 약 2 배 이상 우수한 신뢰성이 관찰되었다. 또한 CSP의 실장 시 Sn-3.0Ag-0.5Cu보다 Sn-1.2Ag-0.5Cu-0.4In 조성 솔더 페이스트를 적용한 경우에서 보다 우수한 내 충격 신뢰성을 나타내어 기본적으로 개발된 Sn-1.2Ag-0.5Cu-0.4In 솔더 페이스트가 Sn-3.0Ag-0.5Cu 조성의 기존 솔더 페이스트 보다 내 충격 신뢰성이 우수함을 검증할 수 있었다. 각 조성의 솔더 조인트를 $150^{\circ}C$ 에서 500시간 aging한 후 실시한 내 충격 신뢰성 평가에서는 모든 조성에서 그 신뢰성이 급감하는 경항을 나타내었으나, Sn-1.2Ag-0.5Cu-0.4In가 Sn-l.0Ag-0.5Cu보다도 그 상대적인 신뢰성이 우수한 것으로 관찰되었다. 이와 같이 aging 후 실시하는 충격시험은 가장 실제적인 상황과 유사한 조건이므로 상기의 실험 결과는 매우 고무적이었으며, 이에 대한 보다 면밀한 분석이 요청되었다. 마지막으로 파면 및 미세조직 관찰을 통하여 각 조성에서의 충격 파단 특성을 비교, 분석해 보았다.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.564-572
• /
• 2013

We investigated the quality characteristics of brewing brown rice vinegar through a traditional static fermentation process. Accordingly, we decided to compare the physicochemical characteristics of brewing vinegar at different temperatures and filtration methods. In four to five weeks' time, the acetic acid fermentation exhibited the highest titratable acidity and then it eventually decreased. The titratable acidity was affected by the filtration method. It was revealed that the titratable acidity was higher in the forced filtration than the traditional filtration method. Various organic acids were detected in order to initialize the fermentation stage and as the fermentation progressed, only the acetic acid could be detected. The total free amino acid content was higher at a temperature of $30^{\circ}C$ than at $20^{\circ}C$. Moreover, the free amino acid content was dependent on the acetate content during the acetic fermentation process. The main bioactive substance of the ${\gamma}$-aminobutyric acid content was more than twice at a fermentation temperature of $30^{\circ}C$ compared to the fermentation temperature of $20^{\circ}C$. Furthermore, the total amino acid and essential amino acid content at a temperature of $30^{\circ}C$ was excellent. The quality of the brown rice vinegar via forced filtration method at a temperature of $30^{\circ}C$ was the most excellent. Based on these results, the fermentation temperature and the use of nuruks (fermenting agent) affected the quality of the brown rice vinegar, and an appropriate method to consider its purpose is required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2010

We have developed a sodium fluoride containing gelatin and methyl cellulose gel. Cariostatic abilities of those gel were investigated and compared with APF gel and fluoride varnish($Cavityshield^{TM}$). We prepared the bovine tooth samples and divided into two surface, control side and experimental side in same specimen for exclusion of difference between specimens. The experiment was consisted of 4 groups : (I) APF gel : (II) $Cavityshield^{TM}$ : (III) Gelatin F gel : (IV) Methyl cellulose F gel Decalcification were produced by placing each specimen into artificial acidic solution(pH 4.0) for 72 hours. Surface microhardness were measured and depth of demineralization lesion were measured by polarizing light microscope. The results were as follows: 1. The difference of VHN between control and experimental side is smallest in group I (p<0.05). 2. The largest difference was shown in group II (p<0.05). 3. There were no significant difference between group III and IV in microhardness test (p>0.05). 4. The difference of lesion depth is smallest in group I (p<0.05). 5. There were no significant difference between group II, III and IV in lesion depth (p>0.05). The result of the present study indicate that the fluoride containing gelatin and methyl cellulose gel is more effective than APF gel and is similar to fluoride varnish application for prevention of demineralization.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.3
• /
• pp.124-131
• /
• 2006

For commercialization of molten carbonate fuel cell (MCFC), it has some problems to be overcome such as decrease of porosity and thickness of the anode under the operating condition (at $650^{\circ}C$ and working pressure of more than 2 $kg_f/cm^2$). Recently, Ni-Al alloy anode has been proposed to replace the conventional Ni-Cr anode as an alternative material to resist a creep and inhibit the sintering. The objective of this research is to sinter the green sheet of Ni-Al alloy anode during single cell pre-treatment process, which has several advantages like cost down and simplification of manufacturing process. However, the Ni-Al alloy anode prepared with a conventional pre-treatment process showed the phase separation of Ni-Al alloy and formation of micropore(${\leqq}0.4{\mu}m$), resulting in low creep resistance and high electrolyte re-distribution. In order to prevent the Ni-Al alloy anode from phase-separating, nitrogen gas was used in the process of pre-treatment. Introducing the nitrogen, the phase separation from Ni-Al alloy into nickel and alumina was minimized and increased creep resistance. However, there was some micropore formation on the surface of Ni-Al alloy anode during the cell operation due to creation of lithium aluminate. Addition of more amount of electrolyte into a cell, especially at cathode, made the cell performance stable for 2,000 hrs. Consequently, it was possible to make the Ni-Al alloy anode with good creep resistance by the modified in-situ sintering technique.