• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.1-10
• /
• 2013

IEC publications have applied in many countries all over the world such as Europe or Japan and these also have been published as in dustrial standards (KS) and notifications of Korea Food and Drug Administration (KFDA) in Korea. As the general standard of IEC 60601 series for medical electric (ME) equipment was revised as $3^{rd}$ edition in 2005, additional and particular standards have been revised or established newly. Under these circumstances, it is importance for manufacturing and assembling companies or authorized testing companies to understand the trend for revisions of IEC publications. Therefore in this study, the latest version of 3 IEC standards related to medical X-ray equipment : IEC 60601-2-44 for X-ray equipment for computed tomography (CT), IEC 60601-2-45 for mammographic X-ray equipment and IEC 60601-2-54 for X-ray equipment for radiography or radioscopy were covered and analyzed for trends and features accompanied by revision based on IEC 60601-1 $3^{rd}$ Ed. As KFDA notifications in force have referred to the particular standards based on 2nd edition of IEC 60601-1, those revised version of 3 particular standards were compared to KFDA notifications in force. The features of the latest standards applying IEC 60601-1 $3^{rd}$ Ed were shown as following: 1) Requirements for mechanical hazards, especially (motorized) moving parts were emphasized. 2) Indication and recording of patient dose were required. 3) Risk management process was introduced and enabled to monitor potential risks systematically. 4) DR system (digital radiography system) as well as analogue system (film-screen system) was included in the scope. Presently, KFDA will revise the notifications applying the particular standards based on IEC 60601-1 $3^{rd}$ Ed in a few years. Therefore the features of particular standards applying IEC 60601-1 $3^{rd}$ Ed was expected to help manufacturers, assemblers or testing companies of medical electric equipment understand IEC publications or KFDA notifications slated to be published.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.1
• /
• pp.55-62
• /
• 2019

Rapeseed meal, which is a byproduct of rapeseed oil extraction, improves crop productivity by supplying nutrients to the soil. The present study aimed to manufacture fermented rapeseed meal compost using two effective microbial agents and evaluate their efficiency as fertilizer. To types of fermented rapeseed meal, manufactured using either a bio-carrier or microbial agent, showed no differences in pH, electrical conductivity (EC), and total nitrogen content. However, the contents of $NH_4-N$ and $NO_3-N$ as inorganic nitrogen were increased by 5.6 times and 1.5 times, respectively, after 5 d of fermentation. Rapeseed meal fermented for 5 d was applied to tomato a basal fertilizer and after eight weeks, the plant height increased in all fermented rapeseed treatments compared to that in the chemical fertilizer treatment, and also the quantum yield of photosystem II (PS II) showed the same trend. The total nitrogen content of tomato leaves treated with a microbial fermented rapeseed meal was twice as high as that of that treated with a chemical fertilizer. It was confirmed that the increase in the tomato height was an effect of the rapeseed meal containing inorganic nitrogen, which can easily be absorbed by plants. From these results, it is considered that fermented rapeseed meal manufactured with an effective microbial agent for 5 d showed the highest inorganic nutrient content and greatest growth enhancement in tomato.

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.685-690
• /
• 2011

In this study, a solvothermal reaction to prepare nanocrystalline titania was carried out using $TiCl_4$ and mixed solvents of alcohol and water. The effects of the type and the composition of alcohol on the crystal structure and agglomeration of final $TiO_2$ products were investigated. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as scanning electron microscopy (SEM). In the solvothermal reaction using the n-butanol solutions with different volume ratios of n-butanol/water (100/0, 75/25, 50/50, 25/75, 0/100), the extent of agglomeration of obtained rutile $TiO_2$ was found to change with the volume ratio of n-butanol/water, and the n-butanol/water ratio of 75/25 revealed the best result for the preparation of well-dispersed nanocrystalline $TiO_2$ powders. The crystal phase of $TiO_2$ prepared through the solvothermal reaction changed with the type of alcohol in solvent (alcohol/water = 75/25). $TiO_2$ products obtained with the aqueous solutions of methanol, ethanol and isopropanol have an anatase phase, while that with n-butanol has a rutile phase. The results showed that, in the solvothermal reaction using both $TiCl_4$ as a starting material and the alcohol-water mixed solvents without any other additive, the enhancement of dispersion and control of crystal structure of $TiO_2$ products can be feasible by simply varying the composition and type of alcohol in the mixed solvents.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.3
• /
• pp.271-277
• /
• 2006

A mechanically pressed juice of Bokbunja (Rubus coreanus Miq.) extract was prepared using 70% ethanol solution. The extract was subjected to gamma-irradiation treatment (20 kGy) and investigated for its change of color and biological activities. Hunter $L^*$ values of the irradiated Bokbunja extract were increased in comparison with the non-irradiated extracts, and the $a^*\;and\;b^*$values decreased by the irradiation treatment. The content of the total phenolic compounds in the non-irradiated and irradiated extracts were 58.4 and 56.5 mg/g, respectively. The 1,1-diphenyl-2-picrylhydrazyl(DPPH) radical scavenging activities of non-irradiated and irradiated extracts at a 250 ppm level were 80% and 79%, respectively. Lipid oxidation was retarded by addition of Bokbunja powder. Nitrite scavenging activity was the highest in the Bokbunja powder at pH 1.2 and the effect was not changed by irradiation. The Bokbunja powder showed antimicrobial activity against Salmonella Typhimurium and Bacillus cereus. However, irradiation of Bokbunja did not affect any physiological functions (p>0.05). A Salmonella mutagenicity assay indicated that the irradiated Bokbunja extract did not show any mutagenicity. Therefore, Bokbunja extract could be used in various applications as a functional material, such as ingredients of food and cosmetic, compositions with functions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.1055-1061
• /
• 2007

Caesalpinia sappan L. is an indeciduous tree distributed in China, India, Miyanmar and Vietnam. Its heartwood has long been used in oriental folk medicines to treat diseases. In this study, antioxidative activities of Caesalpinia sappan L. and the effect of gamma irradiation on its chemical and biological properties were investigated. The ethyl acetate fraction (EtOAc fr.) of Caesalpinia sappan L. was irradiated with 100 kGy of gamma ray. The dark red color of EtOAc fr. was significantly (p<0.05) removed by irradiation (Hunter L and b values increased and a value decreased). The total phenolic content of EtOAc fr. was 865 mg/g and it was increased to 1195 mg/g by gamma irradiation. DPPH radical and superoxide anion radical scavenging activities and lipid peroxidation inhibitory activity of EtOAc fr. were very high and its activities were also increased by gamma irradiation. EtOAc fr. also inhibited the irradiation-induced DNA damage of lymphocyte as determined by comet assay. In conclusion, EtOAc fr. of Caesalpinia sappan L. extract showed high antioxidative activities in vitro. Furthermore, gamma irradiation on EtOAc fr. ameliorated the color and antioxidative properties. Therefore, it can be suggested that Caesalpinia sappan L. may be a good material for antioxidant function and gamma irradiation may be applied for the improvement of chemical and biological properties of Caesalpinia sappan L.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.148-156
• /
• 2015

In this study the differences in the sample size and sample input changes as characteristics of bio-oil oak(Quercus variabilis), the oak 0.5~2.0 mm of the oak weighing 300~900g was processed into bio-oil via fast pyrolysis for 1.64 seconds. In this study, the physico-chemical properties of biooil using oak were investigated. Fast pyrolysis was adopted to increase the bio-oil yield from raw material. Although the differences in sample size and sample input changes in the yield of pyrolysis products were not significantly noticeable, increases in the yield of bio-oil accounted for approximately 60.3 to 62.1%, in the order of non-condensed gas, and biochar. When the primary bio-oil obtained by the condensation of the cooling tube and the seconary bio-oil obtained from the electric dust collector were measured separately, the yield of primary bio-oil was twice as higher than that of the secondary bio-oil. However, HHV (Higher Heating Value) of the secondary bio-oil was approximately twice as higher than that of the primary bio-oil by up to 5,602 kcal/kg. The water content of the primary bio-oil was more than 20% of the moisture content of the secondary bio-oil, which was 10% or less. In addition, the result of the elemental analysis regarding the secondary bio-oil, its primary carbon content was higher than that of the primary bio-oil, and since the oxygen content is low, the water content as well as elemental composition are believed to have an effect on the calorific value. The higher the storage temperature or the longer the storage period, the degree of the viscosity of the secondary bio-oil was higher than that of the primary bio-oil. This can be the attributed to the chemical bond between the polymeric bio-oil that forms during the storage period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.468-476
• /
• 2021

This study examined the effects of a hydrothermal pretreatment (HP) on the nutritional values and in vitro fermentation characteristics of tall fescue and corn silage. This study was conducted through a factorial design of 2 (control or HP) × 2 (hay; tall fescue or silage; corn). For the HP, forage was placed into a glass bottle with 20% w/v of water, and the glass bottle was sealed and heated to reach a temperature of 121℃ (0.12 MPa). The solid residue and liquid were collected and oven-dried at 65℃ for three days. The dried materials were tested for in vitro fermentation at 39℃ for 24 and 48 h. The content of ADF increased significantly regardless of the forage type. After in vitro incubation for 24 h, the total VFA content was significantly lower after HP, regardless of the forage type (p ≤ 0.05), and the propionate concentration was increased in corn silage with HP (p ≤ 0.05). After 48 hours of in vitro incubation, the propionate content increased significantly (p ≤ 0.03) in corn silage with HP (p ≤ 0.05), but the butyrate content decreased significantly (p ≤ 0.05). There was no change in the in vitro dry matter and neutral detergent fiber digestibility by HP regardless of the forage type. Therefore, the use of hydrothermally pretreated corn silage could be advantageous for the supply of energy for ruminants.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.1
• /
• pp.13-34
• /
• 2022

Soil moisture data have been collected at 11 agrometeorological stations operated by The Korea Meteorological Administration (KMA). This study aimed to verify the accuracy of soil moisture data of KMA and develop a correction formula to be applied to improve their quality. The soil of the observation field was sampled to analyze its physical properties that affect soil water content. Soil texture was classified to be sandy loam and loamy sand at most sites. The bulk density of the soil samples was about 1.5 g/cm³ on average. The content of silt and clay was also closely related to bulk density and water holding capacity. The EnviroSCAN model, which was used as a reference sensor, was calibrated using the self-manufactured "reference soil moisture observation system". Comparison between the calibrated reference sensor and the field sensor of KMA was conducted at least three times at each of the 11 sites. Overall, the trend of fluctuations over time in the measured values of the two sensors appeared similar. Still, there were sites where the latter had relatively lower soil moisture values than the former. A linear correction formula was derived for each site and depth using the range and average of the observed data for the given period. This correction formula resulted in an improvement in agreement between sensor values at the Suwon site. In addition, the detailed approach was developed to estimate the correction value for the period in which a correction formula was not calculated. In summary, the correction of soil moisture data at a regular time interval, e.g., twice a year, would be recommended for all observation sites to improve the quality of soil moisture observation data.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.318-332
• /
• 2015

The maize production in South-eastern Asian countries showed a continuous increase with increasing poultry-livestock from the beginning of the 1990s to early 2010. Also the need for a new variety development of each contries was increased rapidly in the same period. Single-Cross hybrid varieties have been developed and supplied from 2001 instead of multi-cross maize varieties since 1992 in Indonesia. In Cambodia, CP group is mainly manufacturing feeds with most of the forage maize from farmers who are growing its seeds from the company. Cambodian main cultivars are varieties of multinational corporations such as DK8868 from Monsanto, NK6326, NK7328 from Syngenta and CP333 from CP group including local business company. Vietnam is the main maze importing country in South-Eastern Asia which had imported 13 times scale of amount compared to exports in average from 1990 to 2011. Vietnamese government has developed a range of varieties for improving their efficiency in production, such as the LVN-10 with political investments. Their production has been reached to 80% of the total. According to the 2012 MIFAFF (Ministry for Food, Agriculture, Forestry and Fisheries) data in Korea, domestic edible maize cultivation area was approximately 15,000ha. It showed 74,399 tons of production, 3.8% of food self-sufficiency in maize and around 0.9% of grain self-sufficiency rate. The consumption of grain is mostly rely on imports in Korea. To overcome the limit of the domestic seed market and increase maize self-sufficiency, the need to develop maze varieties for world-class is increasing at present through analyzing the market trend and prospect of the seed industry in South-eastern Asia.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.4
• /
• pp.177-191
• /
• 2013

6th Industry reduced agricultural income and rural areas, the economic downturn is going to be activated is attracting attention as an alternative. 6th industry means that the integrated or linked, the manufacture and processing of secondary industry based on primary industry, the distribution and service of tertiary industry. Park Geun-hye government to realize the creative economy in agriculture as an alternative to specifically evaluate the 6th industries and suggests various policy alternatives. In addition, to support the development of models and analysis of best practices, including sleep studies are in progress. However, the 6th Industry management body for performing management level, technical level, the leader in comprehensive evaluation of competencies and indicators on the development of an evaluation study is insufficient. In this regard, the present study performed 6th industry management body for the management level, technical level, the leader competency evaluation indicators to develop a comprehensive evaluation by utilizing AHP method was developed indicators. The results achieved in Korea As different countries and the FTA as cheap agricultural imports increased 6th industry revenues associated with the management body is very likely to be worse. The endless competition to survive in the most important of the strategy for each individual project management body to operate on their own, rather than to strengthen internal capacity by strengthening linkages with other industries, products, and services that promote the sale will be. This also is that you need to improve revenue management body. Thus, all 6th industry management body at the location of their efforts to gain the trust of consumers will require, moreover, for each management body to build cooperation between the various measures will be sought. In addition to the smart era rapidly changing needs of customers, depending on the life cycle of products and services are getting faster and the new consumer is getting more and more tend to find new products. Thus, customers and management body 6th industry changes quickly and accurately predict market trends, and also to market new products and services that further efforts would be needed.