• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.379-388
• /
• 2016

There are various system defects from weapons manufacturing due to the numerous production processes and various production environments. The first kind of defect is patent defects, which can be detected by visual inspection, functional testing, and existing quality control procedures during the manufacturing process. The second kind is latent defects, which cannot be detected though existing quality management approaches because of the complexity of the system and manufacturing process. To minimize the initial defect problems, environmental stress screening (ESS) is needed to detect the defects, remove them, and improve the product conditions based on the environmental stress conditions of temperature and vibration. We implemented a tool for quantitative ESS effectiveness analysis and profile design automation based on MIL-HDBK-344 and verified it using six scenarios with different temperature stress, vibration stress, and test designs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.33-34
• /
• 2008

전통 쪽 염료인 니람 제조원리를 바탕으로 산업적인 쪽 염료 제조공정에 대한 제안과 함께 이와 관련한 몇몇 공정변수를 포함한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.10a
• /
• pp.79-80
• /
• 1997

1. 서론 : 열유도 상분리법(TIPS)은 일반적으로 상온에서 적정용매가 없는 고분자 소재를 아용하여 고분자-희석제 2성분계의 혼합물을 적절한 냉각 속도로 상분리 온도 이하로 급냉시켜 연속상과 분산상의 상분리를 일으킨 후 matrix전체에 다공성을 부여하여 분리막을 제조하는 공정이다. 폴리올레핀계 고분자를 중심으로 나일론11. 폴리카보네이트, PVC, ABS 수지 등을 소재로 plasmapheresis, 인공심폐기, breathing wear 등의 용도로 많이 응용되어 왔으며 현재 한외여과나 정밀여과 등 수투과 공정 및 battery separator 등으로의 응용이 활발하게 연구되고 있다. TIPS공정에 의해 제조된 고분자 분리막은 기존의 분리막에 비해 내열성 및 내약품성이 우수하며 여러 가지 다양한 변수로 부터 막의 미세구조를 조절할 수 있어 기공의 크기 및 모양이 조절 가능하다. 본 연구에서는 TIPS 공정을 이용한 고분자 분리막의 제조시 take-up speed와 air gap 등을 변화시켜 이에 따른 영향을 조사하였고 또한 cold stretching에 의한 구조변화를 알아보았다.

• Food Science and Preservation
• /
• v.9 no.2
• /
• pp.194-199
• /
• 2002

This study was conducted to develop processing method for vinegar powder from natural vinegar for encapsulation applications. To optimize the spray drying process, experiment was designed by central composition method to find optimal conditions for manufacturing vinegar powder. The acidity, water absorption, solid content and heat stability of vinegar powder were selected as response variables. The optimal concentration of inclusion complex which was made with vinegar and ${\beta}$-cyclodextrin was determined on 30。bx. On increasing the concentration of ${\beta}$-cyclodextrin as a wall material, the quality of the vinegar was decreased. The optimum conditions of spray drying process for manufacturing vinegar powder were 188∼192$^{\circ}C$ and 500∼600 Lh$\^$ -1/ as inlet temperature and flow rate, respectively.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.34-42
• /
• 1999

The discrete variables such as time and sequence must be considered for automating HAZOP analysis of batch processes in contrast with continuous processes. Because these variables can not be explained by the method used in the HAZOP analysis of continuous processes, we have developed the methodology for HAZOP analysis of batch processes on the basis of the relation between discrete variables and continuous ones. In this study, we have discussed the performance of the methodology on a Latex batch process to evaluate its effectiveness.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.191-196
• /
• 1995

Self-bonding strength developed at the interface of amorphous PEEK films is highly sensitive to the processing variables(time, temperature, and pressure) during the bonding process. In order to examine the effects of these processing variables, amorphous PEEK films were bonded at various bonding conditions and the resultant interfacial bond strengths were measured using a modified single lap-shear test. Experimental results showed that the developed self-bonding strength increases with increase in bonding temperature and is directly proportional to the bonding time raised to the 1/4 power. The applied pressure seems only to produce better wetting at the beginning stage of the bonding process. Conclusively, the self-bonding of amorphous PEEK films provides a great potential for developing excellent bond strength approaching the strength of the parent material without any adhesives in structural applications.

• Korean Journal of Optics and Photonics
• /
• v.3 no.4
• /
• pp.273-279
• /
• 1992

Position reading devices such as optical encoders are most essential components in numerical control (NC) machines and robots. Fabrication process of optical NC-scales was developed for domestic production. The whole process using photo-lithographic techniques consists of about 10 steps. The process parameters were to be carefully determined through many trial experiments. The scale marks of metal film was printed on a glass substrate. The optimum values of various process parameters were extrilcted. The quality of scale marks was attributed to the each process parameters.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2001

Expert system for automating HAZOP analysis of batch processes In contrast with continuous processes must consider the discrete variables such as time and sequence. So in this study, we have developed the expert system for automating HAZOP analysis of batch processes to analyse time and sequence on the basis of the relation between discrete variables and continuous ones. Because these variables can not be explained by the method used in the HAZOP analysis of continuous processes. The proposed expert system have been discussed on a Latex batch process to evaluate its effectiveness.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.6
• /
• pp.34-40
• /
• 2000

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.8-8
• /
• 1998

Alloy 718은 Fe을 다량 함유하고 있어 가격이 저렴하고 엔진 작동조건에서 내열강도, 내환경성 등이 우수하여, 터빈디스크, 터빈샤프트, 터빈실, 압축기 블레이드 등에 다양하게 이용되고 있다. 이 합금은 고온에서 반복응력을 받는 부위에 대부분 사용되기 때문에 고온인장, 저주기 피로측정 등의 기계적 성질이 동시에 요구되며, 이들 특성은 단조공정변수 및 후열처리 등에 의해 크게 바뀌게 된다. 본 연구에서는 Alloy 718을 이용하여 가스터빈 디스크 제조할 경우 공정변수로서 단조온도, 변형속도 등에 의한 조직이 변화와 이에 따른 기계적 특성의 변화를 다루었다. 특히 이 합금에서 결정립크기는 고온 기계적 성질을 결정하는 중요한 변수로 작용하는데, 2단계 단조공정시 재결정에 의한 조직의 변화를 전산모사 방법에 의해 해석하고 그 결과를 조직 관찰을 통해 검증하였다.