• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.744-751
• /
• 2004

This paper presents the implementation of the low cost and high speed RF ATE(Automatic Test Equipment) system, which can be a reasonable solution for reducing the test cost of RF devices. This paper suggests high speed and precise measurement capabilities which are realized by the 16 independent RF ports with high speed switching time and high accuracy digitizer using the industry standard Versus module eXtensions for Instrument(VXI) General Purpose Interface Bus(GPIB) interfaces. Also, the system has the capabilities of quad-site test which can dramatically increase the device throughput. This paper concludes with the demonstration of the implemented ATE system through the setup of RF Power Amplifier Module(PAM), which is under the most competitive market situation.

• The Journal of the Korea Contents Association
• /
• v.14 no.8
• /
• pp.50-60
• /
• 2014

A writer's text signals are converted into visual ones as a director exerts his fundamental capability to interpret and direct. On the other hand, his situational capability comes into play as the production environment changes. Such latest developments as the increasing popularity of production outsourcing, the sapped advertising market, and the growth in the number of the media channels and consequently heightened level of competition have led to changes in the way of advertising and production sponsorship. In turn, directors are faced with a new environment, where they are now required to pick up the role of an advertising director. Given that the production costs have been rising faster than the advertising revenue, such change in the director's situational capability seems to be part of the overall drama industry's evolution.

• Cartoon and Animation Studies
• /
• s.17
• /
• pp.188-204
• /
• 2009

This study purpose development cg technique our nation because present Technique limit of Computer graphic R&D that the best competition of 3D Computer graphic part and present a answer of how to overcome Technique limit of Computer graphic R&D with success example of Computer graphic R&D an advanced country. if we make full of mutuality supplementation of C.T and I.T then hold a dominant position and the over the limit solution We researches on multi or group simulation of cyber character and water, fire, wind, fog Simulation System of Computer graphic and purpose development of direction Computer graphic R&D to people in Computer graphic the result of this study and introduction of project of a research institution and inflection method this time is a point of R&D time of determined and resolution instead creative part.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.95-95
• /
• 2010

자동차 산업에서 차체를 성형하는 프레스 금형 산업은 꾸준히 증가하고 있는 자동차 생산대수와 함께 성장해가고 있으며, 자동차 산업의 국제 경쟁이 심해지고 소비자들의 요구가 다양해짐에 따라 신제품 개발주기에 발맞추어 금형의 제작에도 단납기 및 비용절감을 위한 노력과 제품의 품질 향상을 위해 신기술, 신공법이 적용되고 있다. 한편 자동차 차체를 제작하는 프레스 금형가공은 박판소재를 원하는 형상으로 제작하는 공정으로써, 프레스의 상 하 운동을 이용하여 강판을 성형한다. 이러한 금형의 형태는 곧 자동차 차체 제품의 형태를 완성하므로 제품을 성형하는 도중에 금형과 소재의 마찰에 의해 금형의 마모나 마멸이 발생하여 제품의 품질을 저하시킬 우려가 있다. 따라서 금형의 내마모성 및 수명을 향상시키기 위한 방안들 중 표면경화처리가 행해지고 있으며, 그중 공정 속도가 빠르고 국부적인 열처리가 가능한 레이저 표면처리 방법이 많은 관심을 받고 있다. 본 연구에서는 이러한 금형의 성질을 향상시키기 위해 고출력 다이오드 레이저를 이용하여 프레스 금형공정 중 드로잉(drawing) 공정에의 적용을 위한 표면경화처리를 실시하였다. 최대출력 4.0kW의 다이오드 레이저를 사용하였으며, 6축 외팔보 로봇에 열처리용 광학계를 장착하여 열처리를 실시하였다. 또한 광학계 부근에는 적외선 온도센서가 부착되어있어 열처리시 시험편의 표면온도를 실시간으로 측정할 수 있도록 구성되어져있다. 시험편은 금형재료용 구상흑연 주철인 FCD550 소재를 사용하였으며, 공정변수에 따른 열처리 특성을 파악하고, 그 경화특성을 평가하였다. 실험 결과, FCD550 소재의 표면 열처리시 레이저 출력 3.5kW, 빔 이송속도 3mm/sec에서 최적의 열처리 특성을 나타내었으며, 이때의 최고 경도는 930Hv을 나타내며 모재에 비해 경도가 3배 정도 상승하는 우수한 경화특성을 보였다.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.66-73
• /
• 2007

The Jewelry-relation industry is being placed in the crises which are serious with depression of domestic market, design development and a major force absence also high labor cost charge. The consumers have the value of the price preparation maximum and product differentiation which they want. The Jewelry CAD and RP equipment shorten cost of production enterprise which depended hand-metal work provided for the various design and a rapid new product. But until now, it was necessary to the original work of best condition casting vacuum cycle as difficult with direct casting of synthetic resin from RP equipment. I intend to imply significance about through the CAD and RP equipment application result with it analyses, after jewelry CAD and RP work applicable to direct casting will be possible and able to through the casting vacuum cycle produce the product which is suitable in the original production. Through the this paper jewelry secures a quality improvement of the product and discrimination characteristic being various competitive power of design and provide a new base in product production.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.579-586
• /
• 2013

To see what the promotional movie of the same product, Each concept were respectively constructed for Optimized SNS marketing movie. There are two types of movies. One is the teaser of product design in the form of showing 'Feature Movie' and the other is the 'Viral Movie' presenting USP of the product in parody technique, which can be compared with each others. The two movies show on YouTube, then feedback from viewers were analyzed in detail. As a result, data for view and shares of viral movie showed relatively higher than the feature movie. It means that the viral movie is more effective for marketing since its various elements such as fun, story and visuals are sharable. It makes people more interested and immersed in these contents. Thus, viral movies for SNS marking are distributed to reflect the issue of the time, all the concepts are clear to show what the product is for, and most importantly it can trigger the attention of viewers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.449-449
• /
• 2012

플라즈마 디스플레이 패널(PDP)은 가격 경쟁력이 뛰어나고 빠른 반응 속도를 기반으로 한 생생한 화질이 구현 가능한 장점에 힘입어 대형 평판 디스플레이 시장에서 주도적인 위치를 점하여 왔다. 이러한 특징을 갖고 있는 PDP는 최근 성장세를 보이고 있는 PID (Public Information Display) 시장에서도 그 효력을 발휘할 것으로 보인다. 따라서 기존의 HD급이나 Full HD급 미소 방전셀이 아닌 대면적 방전셀을 적용한 PDP 의 방전 특성에 대한 연구가 중요할 것으로 생각된다. 본 논문에서는 ITO 전극 간격 및 전극 폭, 격벽의 폭 및 높이 등 PDP 의 방전 특성에 영향을 미치는 요소들의 수치를 변화시켜 가며 대면적 방전셀을 적용한 PDP의 기본적인 방전 특성을 살펴보고자 하였다. 이를 바탕으로 대면적 방전셀 PDP에서 고효율을 달성하기 위해 필요한 인자의 설계 방향을 제시해보고자 하였다. 본 논문에서 연구된 PDP는 0.862.58 mm의 셀의 크기를 갖도록 설계하였다. 앞서 제시한 바와 같이 구조 변수의 최적화를 위하여 ITO 전극 간격은 80~1, 전극의 폭은 250~750로 다양하게 주어 상판을 제작하였고 격벽의 폭은 100~200, 높이는 150~300까지 다양한 크기를 가지는 하판을 제작하여 박막 증착, 합착, 가열 배기 등의 과정을 통하여 최종적으로 2인치 크기의 테스트 패널을 제작하여 각 패널별 전압 변화, 휘도, 효율 특성 등이 분석되었다. 실험 결과 격벽 폭 150, 높이는 300일 때 negative glow 방전이 안정적으로 형성될 수 있었음을 확인하였고 최적화된 격벽 수치를 기반으로 다양한 ITO 전극 간격 및 전극 폭을 적용한 패널의 방전 특성을 분석할 수 있었다. 이러한 일련의 실험 결과들을 기반으로 향후 대면적 방전셀의 방전 전압을 낮추고 발광 효율을 개선하는데에 있어서 3전극의 면방전 구조를 가지는 PDP 의 셀을 설계하는데에 있어서 올바른 방향을 마련할 수 있을 것이라 생각된다.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.97-103
• /
• 2012

Composite honeycomb sandwich plate is light and strong. It is easy to produce. It began to be applied to the bodyshell of rolling stock. Generally, weight saving amounts to 27%. However, the material cost of it is much higher than that of aluminum extrusion profile, which prevents popular use of it for bodyshell. In this paper, manufacturing processes of two light materials were compared to investigate cost impact. After cost breakdown was defined, economics of two materials was analyzed using the previous cost data. Easy production of composite bodyshell could compensate for higher material cost. Mass production of composite bodyshell can make the equipment cost lower for the composite bodyshell so that it may have strong competitiveness to the aluminum bodyshell. Operational energy saving due to weight reduction was also presented referring to the actual statistical data in a metro line.

• Journal of the Korea Convergence Society
• /
• v.8 no.7
• /
• pp.191-198
• /
• 2017

This study offers the possibility of a new integrated product of video technology and public culture content. The Development of 'the Urinal of Emotional Type with Screen' will introduce a new sanitary pottery product and it will be a new attempt to combine hygiene pottery product with high-tech electronic product. It is a product development idea that presents the new marketability of the sanitary pottery product with the improvement of awareness of the restroom and the idea of wit through public information notification and advertisement effect. For the commercialization of the product, the prototype will be made through a separate production process with the design of this project, through 3D rendering, 3D mockup and so on. Various product expansions can be consulted with manufacturers after that. It is a new approach of image making with high quality and differentiated pricing strategy, that targeting small-scale business, such as franchise coffee shops and liquor stores with high quality and differentiated pricing strategy, and it will lead the market trend with various marketing availability through differentiated video contents.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.380-386
• /
• 2006

Electric fuel sender fur the vehicle fuel gauge system was designed and fabricated based on the CPW(Co-Planer Waveguide) transmission line theory. It is applied on this system that characteristic impedance of RF transmission line can be varied by the surrounded material of the line. By the characteristic impedance owing the level of gasoline or diesel fuel in vehicle fuel tank, CPW line has corresponding reflected signal as much as changed impedance. Detected signal is amplified, and delivered to fuel indicator into cluster unit on dash board. Conventional floating mechanical buoy level gauge has several defects as low reliability and high break down rate by mechanical operation, and has not good linearity for the fuel level difference. CPW line with electric circuits are constructed on 1.6 mm thickness epoxy substrate, and measurement shows that this system has more accurate level and better linearity than conventional mechanical system. New electric fuel sender which has good productivity with long lifetime and low-in-cost by the SMT chip assembling could be replaced this system with conventional floating buoy system.