• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9B
• /
• pp.857-866
• /
• 2009

Recently, IP mobility study of infra's common elements is undergoing processes to achieve FMC based on All-IP. Existing typical mobility technology based on IP is IETF's Mobile IP. However, it faced to limitations due to packet loss, delays when MN is moving on Mobile IP, also existing network infra - routers (FA)-needed to add/change the functions to support Mobile IP. In this paper, existing mobility problems based on IP and the suggested improvements for platforms which support mobility, quality, security are proposed. It discusses the performance on the current existing IP infrastructure derived from simulation analysis on mobility packet loss and delay. From the resulting data, improvements will also be outlined for optimal performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.815-818
• /
• 2015

AODV routing protocol, one of the most studied routing protocols for the Mobile Ad hoc Network (MANET), uses the number of hops as the metric to choose a path from a source node to a destination node. If the path is deteriorated, it will cause many problems to the communication. In order to improve the performance of the network, we propose AuM-AODV routing protocol that contains an auxiliary metric besides the number of hops. Nodes using AuM-AODV use control packets such as Route Request (RREQ), Route Reply (RREP), and HELLO to exchange information about network topology like AODV routing protocol. AuM-AODV routing protocol is implemented in NS-3 for performance evaluation. We use three performance metrics, that is to say, throughput, packet delivery ratio, and average end-to-end delay. According to numerical results, the new AuM-AODV routing protocol has better performance over three performance metrics than AODV routing protocol.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.47-54
• /
• 2013

In this paper, the structural design of optical Internet is analyzed and by using UNI (User Network Interface) signaling protocol an optical transmission experiment was performed. The hierarchical structure of the basic optical Internet consists of the backbone network, the service network and the access network. The necessary functions for each layer were described as follows: Control structure of the optical transport layer, network operation and management structure, internetworking technology of sub networks, routing and signaling technology. By using UNI signaling protocol from OIF (Optical Internetworking Forum), the optical transmission in the proposed structure of the optical Internet network was experimented. By the traffic generation of LSP (Label Switched Path) data packets along the route-configuration was delivered to UNI. Finally, by showing the value of TCP (Transmission Control Protocol) packets the optical transmission was completely and successfully demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.343-355
• /
• 2003

Fair bandwidth allocations at routers protect adaptive flows from non-adaptive ones and may simplify end-to end congestion control. However, traditional fair bandwidth allocation mechanisms, like Weighted Fair Queueing and Flow Random Early Drop, maintain state, manage buffera and perform packet scheduling on a per-flow basis. These mechanisms are more complex and less scalable than simple FIFO queueing when they are used in the interi or of a high-speed network. Recently, to overcome the implementation complexity problem and address the scalability and robustness, several fair bandwidth allocation mechanisms without per-flow state in the interior routers are proposed. Core-Stateless Fair Queueing and Rainbow Fair Queuing are approximates fair queueing in the core-stateless networks. In this paper, we proposed simple Layered Fair Queueing (SLFQ), another core-stateless mechanism to approximate fair bandwidth allocation without per-flow state. SLFQ use simple layered scheme for packet labeling and has simpler packet dropping algorithm than other core-stateless fair bandwidth allocation mechanisms. We presente simulations and evaluated the performance of SLFQ in comparison to other schemes. We also discussed other are as to which SLFQ is applicable.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.51-55
• /
• 2008

Request High-Images, High-quality, duplex transmission, BcN Voice telephone, Broadcast, Data internet service came to be all possible and demolished original communication service area. Also, The quality is guaranteed stablely to new business and ISP the requirement comes to become a multicasting quality guarantee mechanism which there is the reliability for a information communication and High-quality multimedia service. Like this, a multicast mechanism to be guaranteed must become air control End-to-End QoS for a service supply, a transmission delay a packet loss or requirement which the user requests guarantee and multicast Path-NET which there is the reliability must be provided. Therefor, we proposed IP base multicast new join the present the multicast mechanism of Probing packet foundation which there is the efficiently a linking acceptance, we used ns-2 simulator for the performance evaluation of the proposed.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.520-534
• /
• 2003

In this paper, a performance evaluation model of the Fat-tree Network with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the switch network. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. Two important parameters of the network performance, throughput and delay, are then evaluated. The proposed model takes simple and primitive switch networks, i.e., no flow control and drop packet, to demonstrate analysis procedures clearly. It, however, can not only be applied to any other complicate modern switch networks that have intelligent flow control but also estimate the performance of any size networks with multiple-buffered switches. To validate the proposed analysis model, the simulation is carried out on the various sizes of Fat-tree networks that uses the multiple buffered crossbar switches. Less than 2% differences between analysis and simulation results are observed.

• Journal of Internet Computing and Services
• /
• v.13 no.4
• /
• pp.95-102
• /
• 2012

The development of applications for vehicular ad hoc networks (VANETs) has very specific and clear goals such as providing intellectual safe transport systems. An emergency warning technic for public safety is one of the applications which requires an intelligent broadcast mechanism to transmit warning messages quickly and efficiently against the time restriction. The broadcast storm problem causing several packet collisions and extra delay has to be considered to design a broadcast protocol for VANETs, when multiple nodes attempt transmission simultaneously at the access control layer. In this paper, we propose an early intelligent alert broadcasting (EI-CAST) algorithm to resolve effectively the broadcast storm problem and meet time-critical requirement. The proposed algorithm uses not only the early alert technic on the basis of time to collision (TTC) but also the intelligent broadcasting technic on the basis of fuzzy logic, and the performance of the proposed algorithm was compared and evaluated through simulation with the existing broadcasting algorithms. It was demonstrated that the proposed algorithm shows a vehicle can receive the alert message before a collision and have no packet collision when the distance of alert region is less than 4 km.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.291-292
• /
• 2014

High-speed video transmission modes of master bridge IC are implemented, which supports MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface) standard. MIPI DSI master bridge IC sends RGB data and various commands to display module (slave) in order to test it. The master bridge IC consists of buffers storing video data of two lines, packet generation block, and D-PHY layer that distributes packets to data lanes and transmits them to slave. In addition, it supports four bpp (bit per pixel) formats and three transmission modes including Burst and Non-Burst (Sync Events, Sync Pulses types). The designed bridge IC is verified by RTL simulations showing that it functions correctly for various operating parameters.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.6
• /
• pp.173-186
• /
• 2003

Distributed Denial-of-Service(DDoS) attack prevent users from accessing services on the target network by spoofing its origin source address with a large volume of traffic. The objective of IP Traceback is to determine the real attack sources, as well as the full path taken by the attack packets. Existing IP Traceback methods can be categorized as proactive or reactive dating. Proactive tracing(such as packet marking and messaging) prepares information for tracing when packets are in transit. Reactive tracing starts tracing after an attack is detected. In this paper, we propose a 'advanced ICW Traceback' mechanism, which is based on the modified pushback system with secure router mechanism. Proposed mechanism can detect and control DDoS traffic on router and can generate ICMP Traceback message for reconstructing origin attack source, by which we can diminish network overload and enhance Traceback performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1047-1054
• /
• 2022

With the advent of SDN, a next-generation network technology that separates the hardware and software areas of network equipment and defines the network using open source-based software, it solves the problems of complexity and scalability of the existing network system. It is now possible to configure a custom network according to the requirements. However, it has a structural disadvantage that a load on the network may occur due to a lot of control communication occurring between the controller and the switch, and many studies on network load distribution to effectively solve this have been preceded. In particular, in previous studies of load balancing techniques related to flow tables, many studies were conducted without consideration of flow entries, and as the number of flows increased, the packet processing speed decreased and the load was increased. To this end, we propose a new network load balancing technique that monitors flows in real time and applies dynamic flow management techniques to control the number of flows to an appropriate level while maintaining high packet processing speed.