• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.116-117
• /
• 2000

전광 네트워크(All-optical Network)에서 중요한 기능을 담당하는 전광 교환기는 전광 교환 소자 (All-optical Switching Element)로 이루어져 있는데, 각 교환 소자들은 스위칭 모듈(SM), 라우팅 제어 처리기(RCP), 헤더 처리 모듈(HPM), 그리고 입/출력 인터페이스 모듈(IIM, OIM)로 이루어져 있다. 스위칭 시스템 내에 도착하는 패킷은 원하는 스위치의 출력단에 도착하기 전에 많은 교환 소자(SE)들을 지나가게 되는데, 이 때 수많은 패킷들이 서로 충돌하게 되며, 이 과정에서 패킷이 손실된다. (중략)

• Electronics and Telecommunications Trends
• /
• v.18 no.6 s.84
• /
• pp.8-18
• /
• 2003

이동 Ad Hoc 네트워크에서 플러딩(flooding)은 제어 및 데이터 패킷을 브로드캐스팅하기 위해 주로 사용되고 있지만, 노드들간의 공유된 무선 채널 사용 및 무선 전송영역의 중첩으로 인하여 플러딩 수행 시에 발생되는 자원 경쟁, 패킷 충돌 및 패킷 중복 수신현상은 네트워크의 성능을 저하시키는 요인이 되고 있다. 본 고에서는 이동 Ad Hoc 네트워크에서 패킷 플러딩 수행 시에 발생되는 문제점을 기술하고 이를 해결하기 위해 제안된 다양한 플러딩 기법들을 소개한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.270-275
• /
• 1998

무선망에서는 높은 에러율과 핸드오프로 인해 패킷 손실이 자주 발생한다. 그러나, 기존의 TCP/IP 프로토콜에서는 패킷 손실을 혼잡에 의해서 발생한 것이라 보고, 패킷 송신율을 줄임으로써 혼잡제어를 실시한다. 따라서 기존의 TCP/IP 프로토콜을 무선망에 그대로 적용했을 경우 매우 낮은 성능을 나타낸다. 본 연구에서는 무선망에서의 국부적인 재전송을 통하여 패킷 손실을 보완하고, 사용자가 셀 간을 이동할 때 핸드오프 지연시간을 줄일 수 있는 새로운 핸드오프 방식을 제안한다. 시뮬레이션을 통해서 제안된 방법을 성능을 평가한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.185-190
• /
• 2009

In this paper, an observer-based intelligent controller for the nonlinear networked control systems with packet loss is proposed for wireless sensor network. For the intelligent control of the nonlinear system, it uses the fuzzy system with Takagi-Sugeno (T-S) fuzzy model. The observer is designed for the fuzzy networked control system, and the output feedback controller is proposed for the stability of estimates and errors. The stability condition of the closed-loop system with the proposed controller is represented to the linear matrix inequality (LMI) form, and the observer and control gain are obtained by LMI. An example is given to show the verification discussed throughout the paper.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.3
• /
• pp.48-56
• /
• 2005

This paper proposes a dynamic end-to-end flow control algorithm that is more effective than previous methods considering either the Rate of Packet Loss (RPL) or Round Trip Time (RTT). When the RPL is under normal conditions, the current network status will be in one of three defined states by using the RTT and this makes bandwidth control precise before serious packet loss occurs. If the RPL exceeds a critical level, then the network is considered to be in a fourth state. Suitable transmission rates are determined depending on the network status and are controlled by adjusting not only the number of transmitted frames but also the quality of the frames. In this paper, we present some experimental results of the proposed algorithm. According to our quantitative analysis, the proposed method performs 1.6 to 6 times better than the previous method in terms of the RPL. At the same time, the total number of transmitted packets is increased, which indicates that the proposed method can provide greater bandwidth capacity than previous methods.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.353-358
• /
• 2006

Unlike TCP Reno, TCP Vegas recognizes network congestion through the measuring of RTT (Round Trip Time) and decides the main congestion control parameters, such as Windows size. But, congestion avoidance scheme of Vegas poorly reflects asymmetric characteristics of packet path because TCP Vegas uses the measuring of RTT that reflects forward/backward packet transmission delay as a forward delay. The RTT can't infer the forward/backward transmission delay variation because it only measures the packet's turn around time. In this paper, We have designed and implemented a new Vegas congestion control algorithm that can distinguish forward/backward network congestion. We have modified the source codes of TCP Vegas in Linux 2.6 kernel and verified their performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.491-497
• /
• 2015

In this paper a method of design and Implementation of RFID based control system for reducing standby power consumption at the power outlet is described. The system is composed of a RF controlled power outlet having relay and an active RFID tag communicating with the RF reader module controlling the relay. When the tag carried by human approaches to the RF reader the reader recognizes the tag and switch off the relay based on the RSSI level measurement. A low power packet prediction algorithm has been used to decrease the DC power consumption at both the tag and the RF reader. The result of experiment shows that successful operation of the relay control has been obtained while low power operation of the tag and the reader is achieved using above algorithm. Also setting the distance between the reader and the tag by controlling transmission power of the tag and adjusting the duty cycle of the packet waiting time when the reader is in idle state allows us to reduce DC power consumption at both the reader and the tag.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.119-124
• /
• 2001

A new WDM-based protocol for scheduling a variable-length message is proposed in this paper. Two control slots, Pre-reservation slot and Reservation Slot, are used to coordinate transmission and diminish the collisions of packet to minimize the access delay. When there is an idle reservation slot, a control packet is transmitted on that slot and message is transferred. And the node continues to transmit its control packet through the corresponding slot every cycle, until the message is completely transmitted. If an idle reservation slot is not available, the node schedules the transmission time of message in earliest available time using Pre-reservation slots. The proposed scheduling protocol has several advantages; any new node can join the network anytime without network re-initialization. Moreover, with the pre-reservation slots, we can avoid the packet collisions and destination conflicts, and we can improve the access delay time for message transmissions.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.403-408
• /
• 2010

The sensor nodes can be installed in the environment in which the temperature change is considerable, such as desert, urban, and data center. Particularly, because the output power becomes less than the targeted power if a temperature is increasing, link quality is degraded and packet losses are occurred. In order to compensate the temperature changes, existing schemes detect the change of the link quality between nodes and control transmission power through a series of feedback process. However, these approaches can cause heavy overhead by additional control packets. In this paper, we propose the T2PC(Temperature-aware Transmission Power Control) to keep up the link quality despite temperature variation. At each node, T2PC compensates the attenuated link quality by controlling the transmission power based on the local temperature measurement. In addition, the packet reception ratio can be improved with less control packets than ones required in existing transmission power control methods based on the feedback control.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.3
• /
• pp.336-343
• /
• 2002

Nowadays, after appearance of wireless network the existent internet environment is changing into the united wire/wireless network. But the present TCP regards all of the packet losses on transmission as the packet tosses due to the congestion. When it is applied on the wireless path, it deteriorates the end-to-end TCP throughput because it regards the packet loss by handoff or bit error as the packet loss by the congestion and it reduces the congestion window. In this paper, for solving these problems we propose the method that controls the performance of TCP on the wireless link by extending ECN which is used as a congestion control mechanism on the existent wire link. This is the method that distinguished the packet loss due to the congestion from due to bit error or handoff on the wireless network, so it calls the congestion control mechanism only when there occurs the congestion in the united wire/wireless network.