• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.95-102
• /
• 2012

In this paper, we propose a method that can construct efficiently a P2P overlay multicast network composed of many heterogeneous peers in communication bandwidth, processing power and a storage size by selecting a peer in a distributed fashion using an ant-colony theory that is one of the computational intelligence methods. The proposed method considers not only the capacity of a peer but also the number of children peers supported by the peer and the hop distance between a multicast source and the peer when selecting a parent peer of a newly joining node. Thus, an P2P multicast overlay network is constructed efficiently in that the distances between a multicast source and peers are maintained small. In addition, the proposed method works in a distributed fashion in that peers use their local information to find a parent node. Thus, compared to a centralized method where a centralized server maintains and controls the overlay construction process, the proposed method scales well. Through simulations, we show that, by making a few high capacity peers support a lot of low capacity peers, the proposed method can maintain the size of overlay network small even there are a few thousands of peers in the network.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.121-121
• /
• 2009

자동차는 코너 주행 시 In-corner와 Out-corner 의 바퀴 궤적이 달라지므로, 특별한 장치가 없이 좌우 구동 측의 바퀴가 같은 속도로 회전을 하게 되면 정상적인 주행이 불가능하다. 따라서 정상적인 코너 주행이 가능 하려면, 코너 안쪽 바퀴보다 바깥쪽 바퀴가 더 빨리 회전해야 하며 이러한 회전 차를 보상받지 못할 경우 바깥쪽 바퀴가 끌리는 현상이 발생하는데 이를 방지하기 위해 디퍼렌셜 기어가 필요하다. 현재 디퍼렌셜 기어는 디퍼렌셜 케이스와 링기어를 볼트로 체결하는 조립 공법을 통해 생산되고 있다. 하지만 볼트 체결 공법은 조립을 위한 볼트와 볼트 체결을 위한 플랜지와 볼팅을 위한 홀을 가공하는 공정이 필요하기 때문에 재료비 절감 및 생산 효율 향상에 매우 불리하고 볼트체결을 위한 부분 때문에 불필요한 무게가 증가하게 된다. 따라서 본 연구에서는 이러한 기계적 체결 방식을 레이저 용접 방식으로 대체하여 재료비를 절감하고 무게 저감을 통해 주행성능을 향상시키고자 하였다. 링기어의 소재는 침탄처리강(SCM420H)이며 디퍼렌셜 케이스의 소재는 주철(GCD500)을 사용하고 있다. 주철은 용접시 용접부와 열영향부에서 마르텐사이트 조직과 레데브라이트, 시멘타이트 조직이 생성되며 고탄소 모재의 탄소 확산으로 인한 부분 혼합영역에서 탄소 합금이 생성되어 균열이 발생하는 등 용접성이 매우 좋지 않은 것으로 알려져 있다. 이러한 주철의 난용접성을 해결하는 방법으로는 고탄소 모재 용접시 발생하는 탄소의 확산을 억제하거나 예열이나 후열 처리를 통한 냉각 속도의 제어하는 방법과 오스테나이트 안정화 원소를 첨가한 필러와이어를 사용하여 용접시 마르텐사이트와 시멘타이트의 성장을 방해하는 방법 등이 이용되고 있다. 본 연구에서는 예열처리나 후열처리를 통한 주철의 용접법은 대량 생산을 통한 원가절감을 노리는 자동차 업계의 특성에 비추어 볼 때 비용이나 프로세스 구성 면에서 적용하는 것이 어려울 것이라 판단하여 Ni-base filler metal을 통한 주철의 용접법을 선택하였고 그 결과 실차에 적용하기 위한 비틀림 강성 테스트나 내구 테스트는 통과하였으나 NVH 테스트 결과 볼팅 체결 방식에 비하여 소음이 커지는 문제가 발생하고 링기어의 HAZ부가 고경화 되는 문제가 발생하였다. 때문에 용입깊이를 초기 시제품인 5mm에서 4mm로 변경시켜 입열량 감소 및 용접변형을 줄여 소음 문제를 해결하고자 하였으며 링기어의 침탄층을 1mm 절삭하여 링기어 HAZ부의 고경화 문제를 해결하고자 하였다. 이러한 용접 구조 변경이 용접변형 및 강성과 피로에 미치는 영향력을 알아보고자 용접 및 열처리 상용 소프트웨어인 SYSWELD, 구조해석 상용소프트웨어인 NX_NASTRAN, 피로 해석 상용 소프트웨어인 FEMFAT을 이용하여 시뮬레이션 하였고 실제 구조 변경한 용접 시제품과 비교, 분석하였다.

• Telecommunications review
• /
• v.24 no.5
• /
• pp.677-691
• /
• 2014

Connectivity is becoming more important keywords recently. For example, many devices are going to be connected to the internet. It is usually called as the IoT(internet of things). Many IoT devices can be evolved as a part of giant system of the world wide web. It is a great opportunity for us, because many new services can have emerged through this paradigm. In this paper, we propose a device virtualization framework for smart home service. The proposed framework connects the many home appliances devices and the internet using a dynamic protocol conversion. After our protocol conversion for device virtualization, our framework provides a RESTful API to access the resources of device through the internet. Therefore, the proposed framework can provide a variety of services, so it also can be developed into the ecosystem for smart home service. The current framework version only supports UPnP enabled devices of the home, but it can easily be extended to many other home middleware solutions. To verify the feasibility of the framework, we have implemented several service scenarios.

• Journal of Korean Philosophical Society
• /
• v.147
• /
• pp.261-281
• /
• 2018

This paper will cover recent discussions on the risks of human being due to the development of artificial intelligence(AI). We will consider AI research as artificial narrow intelligence(ANI), artificial general intelligence(AGI), and artificial super intelligence(ASI). First, we examine the risks of ANI, or weak AI systems. To maximize efficiency, humans will use autonomous AI extensively. At this time, we can predict the risks that can arise by transferring a great deal of authority to autonomous AI and AI's judging and acting without human intervention. Even a sophisticated system, human-made artificial intelligence systems are incomplete, and virus infections or bugs can cause errors. So I think there should be a limit to what I entrust to artificial intelligence. Typically, we do not believe that lethal autonomous weapons systems should be allowed. Strong AI researchers are optimistic about the emergence of artificial general intelligence(AGI) and artificial superintelligence(ASI). Superintelligence is an AI system that surpasses human ability in all respects, so it may act against human interests or harm human beings. So the problem of controlling superintelligence, i.e. control problem is being seriously considered. In this paper, we have outlined how to control superintelligence based on the proposed control schemes. If superintelligence emerges, it is judged that there is no way for humans to completely control superintelligence at this time. But the emergence of superintelligence may be a fictitious assumption. Even in this case, research on control problems is of practical value in setting the direction of future AI research.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.577-577
• /
• 2016

기후변화는 전 지구적 현상으로 이로 인한 홍수피해는 심화되고 있다. 기후변화 정부간 협의체 5차 보고서(IPCC, 2014)에 의하면 1980년대 이전 세계 평균 홍수피해액은 70억 달러 수준이었으나 2011년에는 240억 달러로 크게 증가한 것으로 나타났다. 2013년 필리핀에 태풍 '하이옌' 내습으로 인해 6,200여명이 사망하고, 2천여명이 실종되는 피해가 발생하였다. 국내의 경우 2014년 8월 경남 부산지역에는 시간당 130mm가 넘는 국지성 호우에 따라 차량 4,000여대가 침수, 5명 사망 등 약 125억원의 재산피해가 발생한 바 있다. 국회예산정책처(2012)와 소방방재청(2014)에 따르면, 자연재해 중 집중호우 및 태풍에 의한 호우피해가 85%를 차지하였으며, 전국 하천 피해액의 98.7%가 지방 및 소하천에서 발생하고 있다. 이에 따라 중소하천과 같이 소외된 지역의 물복지 향상을 위해서는 홍수재해 상황에 대하여 선제적 효과적 대응을 위한 과학적 체계적인 홍수통합관리 체계의 구축이 요구되고 있다. 특히 홍수관련 유관기관 자료를 연계한 실시간 상 하류 수문상황 모니터링, 홍수분석 및 하천수위별 대응기준 수립, 배수펌프장 등 수리시설원격 제어 등을 포함하는 홍수 통합관리체계 구축과 같은 비구조적 대책의 수립이 제방정비, 저류조 등 구조적 대책과 병행하여 반드시 추진되어야 한다. 이에 K-water는 ICT기반의 물관리기술력과 경험을 활용하여, 인력 기술력 예산 부족 등 열악한 재난관리 여건으로 어려움을 겪고 있는 지자체와 협업을 통해 홍수통합관리체계 구축을 지원하고 있다. 홍수통합관리체계 구축은 지자체 상 하류의 다양한 재난정보를 수집 통합하고, 수집된 정보를 활용한 홍수분석 및 홍수 대응기준 수립을 통해 예방적 재난대응 체계를 마련하는 것으로, K-water는 지난 2010년 남원시를 시작으로 무주군, 군산시, 진안군 등 21개 지자체의 홍수재해 통합관리체계 구축을 지원하고 있다. 특히 남원시의 경우 본 사업을 통한 시스템 구축후 홍수피해액이 50% 감소한 것으로 확인되는 등 재난관련 골든타임을 확보하고 홍수피해 최소화를 위한 홍수재해 통합관리 체계 구축은 이제 선택이 아닌 필수라 할 수 있다. K-water는 물관리 전문 공기업으로써의 역할을 다하고, 예방 중심의 재난관리 체계 마련을 위해 '지자체 맞춤형 홍수통합관리체계' 구축 지원을 지속적으로 확대해나갈 예정이다.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.136-141
• /
• 2008

In this study, the magnetic(static and high-frequency) and microwave absorbing properties have been investigated in Ru-Co substituted M-hexaferrites($BaFe_{12-2x}Ru_xCo_xO_{19}$). The powders and sintered specimens were prepared by conventional ceramic processing technique. With the calcined powders, the composite specimens were prepared using the silicone rubber as a matrix material. The substitution ratio of Ru-Co to obtain in-plane magnetic anisotropy, thus having the minimum coercivity, is much smaller (about x=0.3) than the previously reported Ti-Co substituted specimen. Owing to this low substitution, the specimen has a large value of saturation magnetization($M_s$=65 emu/g). Ferromagnetic resonance behavior and microwave absorbing frequency band is strongly influnced by the coercvity which can be controlled by Ru-Co substitution ratio. It is found that the M-hexaferrites with planar magnetic anisotropy by doping Ru-Co in both sintered and composite form have superior microwave absorbing properties in GHz frequency range.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.440-445
• /
• 2005

The limitation of measurement accuracy and reliability of autostigmatic null lens system are studied for the cases of using inter-distance of null lenses as the adjustment factor of alignment and fixing the distance by mounting. If we investigate the first case, the wavefront aberration of null lens system is compensated by the adjustment process even though the shape of aspherical surface is not properly fabricated. As the result, it brings about the problem of measurement reliability. However, for the fixing process by mounting null lenses, it doesn't cause the reliability problem because the wavefront aberration of null lens system is not compensated. Further, the fixing process shows nearly same result in measurement accuracy to the adjustment process, that is, $0.0316{\lambda}$ vs. $0.0326{\lambda}$. So, we can conclude the setup for autostigmatic null lens system must be constituted by means of the fixing process. Meanwhile, we introduce and define the alignment aperture on aspheircal mirror, which can be approximated as spherical zone for alignment of null lens system, and besides, we calculate the required fabrication accuracy of the zone for the necessary measurement accuracy.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.648-655
• /
• 2008

A gamma irradiation process was applied to prolong the shelf-life of grapes and changes in microbiological, physicochemical, nutritional, and sensory characteristics were investigated during 6 weeks of post-irradiation storage at $4^{\circ}C$ and $25^{\circ}C$. Physiochemical characteristics of grapes such as total sugar content, pH, titratable acidity, and anthocyanine content, were stable after 1 kGy of irradiation, a dose recommended by CODEX for fruits and vegetables. The viable cell counts of contaminating microorganisms were reduced 1-2 logs by this radiation dose. After 6 weeks of storage at $4^{\circ}C$ the microbiological quality of irradiated grapes was stable, but all non-irradiated grapes had deteriorated. Whether or not grapes were irradiated, weight loss rapidly increased after 2 weeks of storage at $25^{\circ}C$, whereas weight loss was delayed by storage at $4^{\circ}C$. Immediately after gamma irradiation, the sensory evaluation results did not differ between samples, and the sensory quality of the irradiated grapes remained acceptable for over 6 weeks of storage at $4^{\circ}C$. The results suggest that 1 kGy of gamma irradiation does not detrimentally affect the nutritional or physical characteristics of grapes, especially when cold storage follows radiation treatment. In conclusion, a combination of gamma irradiation and cold storage prolonged the shelf-life of grapes by 6 weeks.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.516-523
• /
• 2021

A study using selective catalytic reduction (SCR) was conducted in conjunction with ammonia as a reducing agent for controlling nitrogen oxides, a typical secondary inducer of fine dust in the atmosphere. For NH₃-SCR experiments, a commercial catalyst of V/W/TiO₂ only and also V/W-Sb/TiO₂ catalyst with Sb were used, and phosphorous durability was confirmed. As a result of NH₃-SCR experiments, it was confirmed that the addition of Sb to V/W/TiO₂ had durability against phosphorous. In addition, the physical and chemical properties were comparatively analyzed through BET, XPS, H₂-TPR, NH₃-TPD, and FT-IR analysis. From the anaylsis results, when Sb was added to V/W/TiO₂ catalyst, P was also added resulting in the formation of SbPO₄ and the generation of VOPO₄ was suppressed. The phosphorous durability was confirmed by maintaining the redox characteristics of the catalyst before P was added.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.19-27
• /
• 2021

Electrically conductive mortar used in industrial carbon material byproducts was manufactured and analyzed in this study. The contents of the carbon material and mixed water were controlled, and the distance between electrodes was set to 0.42 m and 0.88 m. The carbon material was graphite with a layered structure. The carbon material was used as fine powder and aggregate substitutes according to particle size. The average particle sizes of each materials were 18.4㎛ and 546.1 ㎛ and the electrical conductivities were 62.3 S/m and 32.5 S/m, respectively. To maintain similar mortar flow in each sample, the water content was increased with increasing carbon material, and accordingly, the porosity showed an increasing trend. When electrode distance of the mortar (week 6) was 0.42 m, the voltage-current values were 342 V-1.48 A (S20) and 349 V-1.44 A (S30). For electrode distance of 0.88 m, these values were 513 V-0.98 A (S20) and 500 V-1.01 A (S30). The exothermic properties improved with increasing carbon material content and decreasing electrode distance.