• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.38-45
• /
• 2016

For higher efficiency and reliability of railroad trains with many electronic sensors and actuators, a distributed control system with which electronic components communicate with each other in a distributed manner via a data network is considered. This paper considers Ethernet-based Train Communication Network (TCN) for this purpose and proposes a methodology to optimize the topology in terms of transmission latency and reliability, each of which is modeled as the number of traversing backbone nodes and the number of cables between vehicles, respectively. An objective function is derived accordingly and a closed-form optimum is obtained by relaxing the integer constraint of the number of vehicles for a unit network. Then, the final integer optimum is searched around it. Through numerical evaluation, the validity of the proposed methodology and the characteristics of the resulting solutions are shown.

• The KIPS Transactions:PartD
• /
• v.19D no.4
• /
• pp.299-306
• /
• 2012

To fulfill the complex user requirement, composition web service comprised of existing services is considered from the efficient and reusable point of view instead of making entirely new web service. However, with the growing the number of web services which provide the same functionality but differ in quality value, the service composition becomes a decision problem on which component services should be selected such that end-to-end QoS constraints by the client and overall QoS of the composition service are satisfied. QoS of service aspects is a determinant factor for selecting the services, since the performance of the composed service is determined by the performance of the involved component web service. In this paper, hybrid genetic algorithm is presented to select component services to take part in the QoS-aware composition. The local search method is used to be combined with the genetic algorithm to improve the individuals (component service) in population as well as composed service. The paper also presents a set of experiments conducted to evaluate the efficiency of selection algorithm using the real web service data.

• Convergence Security Journal
• /
• v.11 no.1
• /
• pp.11-18
• /
• 2011

Wireless mesh network technology with transmission speeds similar to wired and wireless technology means to build, compared with wired networks, building a more efficient network to provide convenience and flexibility. The wireless mesh network router nodes in the energy impact of the mobility is less constrained and has fewer features entail. However, the characteristics of various kinds due to network configuration settings and the choice of multiple paths that can occur when the system overhead and there are many details that must be considered. Therefore, according to the characteristics of these network routing technology that is reflected in the design and optimization of the network is worth noting. In this paper, a multi-path setting can be raised in order to respond effectively to the problem of the router node data loss and bandwidth according to traffic conditions and links to elements of the hop count evaluation by using a genetic algorithm as a workaround for dynamic routing the routing metric for wireless mesh network scheme is proposed.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.179-186
• /
• 2011

Wireless Mesh Network technology refers to the technology which establishes wireless network whose transmission speed is similar to that of the wire system, and provides more enhanced flexibility in the building of network, compared to the existing wired network. In addition, it has the feature of less mobility and less restriction from the energy effect. However, there follow many considerations such as system overhead in the case of setting or the selection of multi-path. Accordingly, the focus is on the design and optimization of network which can reflect this network feature and the technology to establish path. This paper suggests the methods on the programming of path in Wireless Mesh Network routing by applying the evaluation value of node service, making use of the loss rate of data, the hop count of bandwidth and link and the traffic status of node, considering the performance of link and load in the fitness evaluation function, in order to respond to the programming of multi-path effectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.209-209
• /
• 2015

상수도 관망은 대표적인 사회기반시설로 수원으로부터 수용가에 이르기까지 안정적으로 유량을 공급하는 것을 목표로 한다. 상수도 관망의 최적설계는 요구되는 절점의 수압, 관로의 유속 등 수리학적 제약조건을 만족시키는 범위 안에서 비용을 최소화하는 설계안을 얻어내는 것을 목표로 시작하였다. 하지만 비용만을 고려한 과거의 상수도 관망 최적설계는 미래의 불확실한 조건에 매우 취약하고, 사용자의 다양한 요구를 충족시키지 못한다. 이 때문에 현대의 상수도 관망의 설계시 다양한 설계인자의 고려와 함께 효율적인 최적설계기법 적용의 필요성이 대두되고 있다. 따라서 본 연구에서는 상수도 관망 최적설계에 다양한 설계인자를 동시에 고려하기 위해 다목적 최적 설계기법인 Multi-objective Harmony Search 알고리즘을 적용하였다. 또한 다목적 최적설계의 효율성 증대를 위하여 매개변수 자동보정 기법 중 하나인 Parameter-Setting-Free (PSF) 기법(Geem and Sim, 2010)을 사용하였다. PSF 기법은 최적화 알고리즘의 매개변수 설정의 번거로움을 없애고, 반복수행을 통한 해 탐색이 진행됨에 따라 가장 효율적으로 작용하는 매개변수를 자동으로 설정하여 탐색효율을 강화하도록 고안된 기법이다. 본 연구에서는 제안된 기법을 실제 상수도관망의 최적설계에 적용하였고 그 결과를 분석하였다. 그 결과 제안된 기법을 통해 관망의 비용을 포함한 다양한 설계인자를 동시에 만족시키는 최적설계안을 효과적으로 도출 할 수 있었으며, 매개변수 자동보정 기법의 적용을 통해 해 탐색의 효율성과 편의성을 향상시킬 수 있었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.555-562
• /
• 2016

Seismic design of braced frames that simultaneously considers economic issues and structural performance represents a rather complicated engineering problem, and therefore, a systematic and well-established methodology is needed. This study proposes a multi-objective seismic design method for an inverted V-braced frame with suspended zipper struts that uses the non-dominated sorting genetic algorithm-II(NSGA-II). The structural weight and the maximum inter-story drift ratio as the objective functions are simultaneously minimized to optimize the cost and seismic performance of the structure. To investigate which of strength- and performance-based design criteria for braced frames is the critical design condition, the constraint conditions on the two design methods are simultaneously considered (i.e. the constraint conditions based on the strength and plastic deformation of members). The linear static analysis method and the nonlinear static analysis method are adopted to check the strength- and plastic deformation-based design constraints, respectively. The proposed optimal method are applied to three- and six-story steel frame examples, and the solutions improved for the considered objective functions were found.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.2
• /
• pp.90-102
• /
• 2010

Flash memory has been widely used as an important storage device for consumer electronics. For the flash memory-based storage systems, FTL (Flash Translation Layer) is used to handle the mapping between a logical page address and a physical page address. Especially, log buffer-based FTLs provide a good performance with small-sized mapping information. In designing the log buffer-based FTL, one important factor is to determine the mapping structure between data blocks and log blocks, called associativity. While previous works use static associativity fixed at the design time, we propose a new log block mapping scheme which adjusts associativity based on the run-time workload. Our proposed scheme improves the I/O performance about 5~16% compared to the static scheme by adjusting the associativity to provide the best performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.29-36
• /
• 2016

A wireless passive sensor network is a network which, by letting separate RF sources supply energy to sensor nodes, is able to live an eternal life without batteries. Against expectations about an eternal life, however, a wireless passive sensor network still has many problems; scarcity of energy, non-simultaneity of energy reception and data transmission and inefficiency in resource allocation. In this paper, we focus on a wireless passive sensor network providing a packet service which is tolerable to packet losses but requires timely delivery of packets. Perceiving the practical constraints, we then consider a contending-type MAC scheme, rooted in framed and slotted ALOHA, for supporting many sensor nodes to deliver packets to a sink node. Next, we investigate the network-wide throughput achieved by the MAC scheme when the packets transmitted by geographically scattered sensor nodes experience path losses hence capture phenomena. Especially, we derive an exact formula of network-wide throughput in a closed form when 2 sensor nodes reside in the network. By controlling design parameters, we finally optimize the contending-type MAC scheme as to attain the maximum network-wide throughput.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.414-419
• /
• 2008

3D rendering is a critical process for a movie production, advertisement, interior simulation, medical and many other fields. Recently, several effective rendering methods have been developed for the photo-realistic image generation. With a rapid performance enhancement of graphics hardware, physically based 3D rendering algorithm can now often be approximated in real-time games. However, the high quality of global illumination, required for the image generation in the 3D animation production community is a still very expensive process. In this paper, we propose a new rendering method to create photo-realistic global illumination effect efficiently by harnessing the high power of the recent GPUs. Final gathering routines in our global illumination module are accelerated by programmable graphics hardware. We also simulate physically based light transport on a ray tracing based rendering algorithm with photon mapping effectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.315-327
• /
• 2002

The main objective of this study is to develop an discrete optimization algorithm of plane steel frames with rigid using second-order-elastic-plastic hinge analysis which is considering panel zone. Conventional analyses of steel frame are usually tarried out without considering the effect of panel zone deformation on frame behavior The validity of this model is established by comparison without panel zone on joint models is analyzed numerically to demonstrate the importance of using realistic models in steel frame analysis. The objective function is taken as Weight of steel frames and the constraints we formulated based on AISC-LRFD(1994). The validity of the developed algorithm we demonstrate by comparing the result with those of SAP2000. The result of the study indicates that the optimal design algorithm considering of panel zone behavior more economic design than simple steel frame design methods.