• Journal of the Korean GEO-environmental Society
• /
• 제13권4호
• /
• pp.13-26
• /
• 2012

The deformation modulus of rock masses is a very important design factor for the computation of stability of tunnels and their support systems. Several empirical formulas to estimate the deformation modulus using simple rock classification methods such as RQD or RMR are widely used because field tests to evaluate the deformation modulus are very expensive and time consuming work. However, these formulas can be depended on experiences from the characteristics of local sites in each country. So it is possible that there might be limitations to estimate appropriate deformation modulus in South Korea using the empirical formulas. Therefore, in this study, the applicability of empirical formulas was analyzed by comparing estimated value with the measured value from eight sites in South Korea. The results show that the estimated value based on the empirical formulas partially have tendency to overestimate. Especially, in case of sedimentary rocks, it was too difficult to apply to the empirical formulas because there was no relation ship between estimated value and measured value. For these reasons, additional data from many tests and accurate analyses are necessary to evaluate the estimation method for the deformation modulus considering the local characteristics of rock masses.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.7-8
• /
• 2009

In this research, comparison and analysis were performed to understand how the cover thickness influences the equation for calculating the amount of confining reinforcement for reinforced concrete columns. And, also, an equation for calculating the amount of confining reinforcement was proposed for reasonable seismic design. In addition, appropriateness and safety of the proposed equation were examined based on the various experimental results performed at home and abroad.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.859-862
• /
• 2008

The objective of this study offer the equation of the development length for GFRP reinforcement. Pullout test carried out to propose the development length for GFRP reinforcement. Test variables included embedment length (L=15, 30 and 45d$_b$ ), pure cover thickness(C=0.5, 1.0, 1.5, and 2.0d$_b$ ), diameter of reforcement(D10, D13 and D16), and three types, (domestic : K2KR, K3KR, foreign : AsUS) of GFRP reinforcement. The method of test were introduced pure pullout and tests lasted until the GFRP reinforcements were reached final failure. Based on the results through the pullout test, the bond characteristics and average bond stress for GFRP reinforcement were investigated. The equation of development length was proposed based on the regression analysis selected specimens having splitting failure. The equation gained from this study compared with the design equation provided by ACI committee 440.1R-06. The results through this study are capable of the flexural member design with GFRP reinforcement having lab spliced.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.301-310
• /
• 1997

본 연구에서는 비(ratio)에 대한 2차잭나이프 추정량을 제안하고, 그것의 편의와 분산이 집단의 수에 대한 감소함수임을 보인다. 또한, 이 추정량의 우수성을 편의와 평균제곱오차의 측면에서 기존의 추정량과 비교 분석한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제12권4호
• /
• pp.586-593
• /
• 2001

본 논문에서는 Cost231-Hata 모델과 Cost231-Walfisch-Ikegami 모델을 비교 분석하고, 두 모델의 전파환경이 서로 근접하게 되는 송신안테나의 높이, 건물군의 높이, 그리고 도로폭의 상관관계를 나타내는 전송손실 곡선들을 제시한다. 이러한 곡선들은 Okumura-Hata 모델의 정성적인 전파환경(도심지, 교외지역, 개활지)을 정량적인 요소(건물군의 높이, 도로폭) 로서 설명하여, Okumura-Hata(Cost231-Hata) 모델을 다른 도시, 나라에 적용시킬 때 하나의 기준으로 활용 될 수 있을 것이다. 또한 최근에 제안된 ITU-R 모델과 Okumura-Hata(Cost231-Hata)모델을 비교 분석한 결과, ITU-R 곡선들은 Okumura-Hata의 교외지역 전파환경에 대한 사용식을 확장한 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.380-385
• /
• 2006

해안 지역의 지하수 최적 개발 또는 관리 이전 단계에 수행될 수 있는 수자원 기본계획을 위한 지하수 개발가능량 산정식이 제안되었다. 산정식은 대수층 특성, 해수침투허용 거리, 지하수 해안유출량 그리고 관정의 위치 등 주요 영향 인자들의 함수이므로 매우 포괄적이며, 잘 알려진 해석 해들을 이용하였으므로 그 근거가 타당하다. 산정식은 관련 변수들의 양 함수로 표현될 수 있으므로 그 적용이 매우 간편하다. 또한 근거없이 임의의 값들이 사용되던 관정의 영향반경을 대수층의 수리특성과 양수량 등의 함수로 표현한 합리적인 식이 제안되었다. 가상 유역에 대한 적용과 수치 해와의 비교분석을 통하여 제안된 식들이 보수적인 결과를 산출한다는 것을 보였다. 제안된 식들을 기존 관정들이 존재하는 유역에 적용하면 추가 개발가능량을 평가할 수 있다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.309-310
• /
• 2009

This study was performed as the first step of concrete materiaI research(concrete test program)of Lotte Super Tower column shortening research. Total 18 month's creep and shrinkage results were obtained from the test so far. The analysis were conducted using those results by design strength and loading age, and then validated model and equation were proposed from the result analysis and regression analysis. AC I209R Model, Bazant-Baweja B3 Model, CEB MC99 Model, & GL2000 Model, were employed for this study. The main analysis was completed on the total shrinkage strain and compliance.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.35-35
• /
• 2011

CFT가 갖는 다양한 구조적 이점으로 인해, 축력이 지배적인 기둥 구조물에만 주로 적용되던 CFT 요소가 점차 거더에 적용되어 가고 있다. 그러나, 현재 CFT 요소에 대한 설계 기준은 축력이 지배적인 보-기둥 구조물에 대한 것으로 제한되어 있으며, 휨이 지배적인 보 구조물에 대한 현행 설계 기준의 적용성을 검토해야 할 필요가 있다. 현행 설계기준에서 제시하고 있는 CFT 요소의 극한 강도 평가방법은 소성응력분배법 및 변형률적합법으로 구분되어지며, 각 방법을 이용한 극한 강도의 평가결과를 기존 연구자들의 CFT 요소 휨 실험결과와 비교 분석하였다. 휨 강성 평가에 대한 타당성을 검증하기 위해 AISC에서 제시하는 휨 강성 평가식을 기존 실험 연구와 비교 검토하였으며, 아울러 압축력에 따라 휨 강성을 보정할 수 있도록 수정된 Roeder et al.의 제안식을 함께 검토하였다. 검토 결과, 강도 평가에 있어서는 설계 기준에서 제안하는 두 방법 모두 CFT 거더의 휨 강도를 적절히 평가할 수 있었으며, 강성 평가에 있어서는 설계 기준의 제안식이 휨 초기 강성을 적절히 평가하는 반면 사용 단계에서의 휨 강성은 Roeder et al.의 수정된 강성 평가식에 의해 적절히 평가할 수 있음을 확인하였다.

• Journal of the Korea Concrete Institute
• /
• 제15권6호
• /
• pp.820-828
• /
• 2003

Recent research has indicated that the current ACI shear provision provides unconservative predictions for large slender beams and beams with low level of longitudinal reinforcement, and conservative results for deep beams. To modify some problems of ACI shear provision, ultimate shear strength equation considering size effect and arch action to compute shear strength in high-strength concrete beams without stirrups is presented in this research. Three basic equations, namely size reduction factor, rho factor, and arch action factor, are derived from crack band model of fracture mechanics, analysis of previous some shear equations for longitudinal reinforcement ratio, and concrete strut described as linear prism in strut-tie model deep beams. Constants of basic equations are determined using statistical analysis of previous shear testing data. To verify proposed shear equation for each variable, effective depth, longitudinal reinforcement ratio, concrete compressive strength and shear span-to-depth ratio, about 300 experimental data are used and proposed shear equation is compared with ACI 318-99 code, CEB-FIP Model code, Kim &Park's equation and Zsutty's equation. The proposed shear equation is not only simpler than other shear equations, it is but also shown to be economical predictions and reasonable safety margin. Hence proposed shear strength equation is expected to be applied to practical shear design.

• International Journal of Highway Engineering
• /
• 제6권3호
• /
• pp.55-64
• /
• 2004

Maximum dry unit weight, ${\gamma}_{dmax}$, is the most important engineering properties for subgrade soil. Existing models to predict ${\gamma}_{dmax}$ containing many parameters, seem to be rather complex. This paper presents new simple models to predict ${\gamma}_{dmax}$. for sandy soils, A number of sieve analysis and compaction tests for 36 types of sands were conducted to develop the regression-based models. Parameters used to estimate ${\gamma}_{dmax}$ are both the geometric mean and geometric standard deviation of the soils, or the particle-size distribution curve parameters. Maximum dry unit weights predicted by the models are in good agreement with the laboratory measurements for the soil samples obtained at 16 locations within the Korea.