• Title/Summary/Keyword: 제로-크로싱

Search Result 8, Processing Time 0.029 seconds

Digital Implementation methode of Totem-pole PFC using GaN Transistor (GaN 트랜지스터를 적용한 토템폴 역률개선회로의 디지털 구현방법)

  • Kwak, Bongwoo;Kim, Myungbok
    • Proceedings of the KIPE Conference
    • /
    • 2019.11a
    • /
    • pp.120-121
    • /
    • 2019
  • 본 논문은 GaN 트랜지스터를 적용한 토템폴 PFC(Power Factor Correction)의 디지털 구현을 위한 방법을 제시한다. 특히, GaN 트랜지스터의 낮은 역회복 특성으로 토템폴 PFC의 연속 연속 모드 동작을 가능하게 한다. 토템폴 PFC는 고속 스위칭을 하는 레그를 GaN 트랜지스터를 사용하고, 라인 주파수로 스위칭 하는 레그는 일반적인 MOSFET을 사용하게 된다. 구조적으로 토템폴 PFC는 제로 크로싱에서 전류 스파이크 문제가 발생한다. GaN 트랜지스터는 전류 스파이크에 취약하기 때문에 최소화되어야 한다. 따라서, 본 논문은 디지털 구현에 있어 제로 크로싱에서 소프트 스타트 구현을 통해 이 문제를 최소화 하고, 모의실험을 통해 디지털 구현의 타당성을 입증하였다.

  • PDF

Implementation of a Senseless Position Controller Capable of Multi-turn Detection in a Turret Servo System (터렛 서보 시스템에서 멀티-턴 검출이 가능한 센서리스 위치제어기 구현)

  • Cho, Nae-Soo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.16 no.1
    • /
    • pp.37-44
    • /
    • 2021
  • This study is implemented as a sensor-less position controller capable of multi-turn detection to replace the expensive absolute encoder used in the turret servo system. For sensor-less control, the position information of the rotor is essential. For this, a magnetic flux estimator was implemented from the mathematical model of IPMSM used in the turret servo system. The position of the rotor and the angular velocity of the rotor were obtained using the rotor magnetic flux calculated from the magnetic flux estimator. Using the zero-crossing technique, one pulse was generated for each rotation of the estimated rotor magnetic flux to measure the number of multi-turns. Simulation and experiment results confirmed the usefulness of the proposed method.

Development of Harmonic and Power Factor Correction Apparatus controlled by Power Electronics Devices (전력용반도체 제어형 고조파 및 역률 보상장치 개발)

  • 김언석;김경환;박성균;임충호;신현록;김재철
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2003.11a
    • /
    • pp.331-336
    • /
    • 2003
  • 본 논문은 마이크로프로세서 및 전력용반도체인 사이리스터로 제어되는L-C 고조파 필터에 관한 것이다. 개발된 고조파 필터는 3상 220[V]이며 25[㎸A]5고조파 제거용이다. 또한 고조파 필터는 콘덴서에 의해 역률을 개선하는 역할을 한다. 고조파 전류 발생시 3사이클 이내에 고조파 필터가 동작하며, 제로 크로싱 제어로 개폐시 과도서지가 발생하지 않는다. 전류변동에 따른 응답속도가 빨라 부수적으로 전압변동에 의한 플리커 현상을 해소시키는 역할도 한다. 개발된 제품에 대하여 안전성능 및 일반성능 실험결과 만족할 만한 결과를 얻었다.

  • PDF

Characteristics of fluorescent lamp back light controller using IGBT (IGBT를 이용한 형광등 백라이트 제어기 특성)

  • Ka, Chool-Hyun;Kim, Soon-Gi
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2005.05a
    • /
    • pp.38-41
    • /
    • 2005
  • IGBT를 이용한 형광등 백라이트 제어기를 설계 제작하여 특성 실험을 한 결과, 타 방식의 백라이트 제어기 비하여 고효율, 고역률, 고품질의 특성을 가지는 한편, 스위칭 시에 발생하는 피크 전류 및 노이즈로 인한 인접 전기전자기기에 영향을 미치지 않도록 함으로써 안정성이 뛰어나며, 또한 기존의 슬라이닥스를 이용한 전원장치를 대체하는 한편 원격제어를 손쉽게 구현할 수 있는 장점을 가지고 있다. 또한 본 제어기는 제로크로싱 동기를 채택하여 온 오프 시에 발생하는 피이크 전류를 방지함으로서 제품의 안전성을 극대화시킬 수 있는 장점을 가지고 있어 차후 산업용 전원 장치 및 각종 가변 전원을 필요로 하는 대상에도 광범위하게 응용될 수 있을 것이다.

  • PDF

The GMSK Modulation for Bipolar Delta Signal (바이폴라 델타 신호에 대한 GMSK 변조)

  • Bang, Seung-Cheol;Lee, Woo-Sang
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38B no.7
    • /
    • pp.581-588
    • /
    • 2013
  • In the basic GMSK, the modulated signals are generated by the preprocessing of NRZ pulse trains with the gaussian low pass filter. In this paper, we proposed the GMSK modulation system with the delta pulse trains. The proposed system constructed with the gaussian pulse generator triggered by the bipolar delta pulse, the differentiator between $+T_b/2$ and $-T_b/2$, and then a matched filter for frequency-modulation function. The spectrum of proposed system was found to be smaller than about 35[%] at 40[dB] attenuated bandwidth, and the center spectrum to be lower than the basic GMSK with zero-crossing property.

Development of Signal Process Software for Electromyograph(EMG) (근전기록장치의 신호처리 소프트웨어 개발)

  • Lee, Sangsik;Park, Wonyup;Lee, Choongho
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.2 no.3
    • /
    • pp.17-22
    • /
    • 2009
  • The objective of this study was to develop a signal process software for a Electromyograph(EMG). And this paper was developed to general signal process software for a Electromyograph using biomechanics. It was used the clinic, rehabilitation, ergonomics and sports. It was composed to the module type for the monitoring frequency analysis, the zero crossing and comparison analysis etc. It's UI(User Interface) made up the continuous monitoring, the reports and the user-friendly-approach. This developed Electromyography will be applied to biomedical engineering system.

  • PDF

A Design of Symbol Timing Recovery for DVB-RCS (DVB-RCS에서 심볼 타이밍 복원에 관한 연구)

  • Mo, Kyoung-Ha;Song, Hyoung-Kyu
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.27 no.8A
    • /
    • pp.771-778
    • /
    • 2002
  • We investigate the design of an interpolation filter of a MF-TDMA demodulator which is applied to DVB-RCS. If sampling is not synchronized to the data symbols, timing adjustment in digital receiver must be performed by interpolation. It is impossible that conventional sinc interpolation filter coefficients are actually extended to infinity. We propose a Kaiser window interpolation filter and a sinc interpolation filter using th Kaiser window. Simulation results show that the performance improvement is realized by employing the proposed interpolation filter.