• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.35-43
• /
• 2004

Skid resistance is an important factor that control braking distance and secure safety by preventing slipperiness between tire and pavement surface. Decrease of skid resistance at wet condition may cause fatal traffic accidents. Dirt materials such as sand and do-icings on the road surface also can be a factor for decrease skid resistance. This study makes an investigation into influence of skid resistance between varied cement concrete pavements about surface texturing method(transverse tining, longitudinal tining, exposed aggregate surface texturing method) and wearing condition of pavement surface texture(new constructed pavement's surface, wore pavement's surface) using accelerate concrete pavement wearing tester when remains of dirt material are obtained between tire and road surface on PCC pavement. As dirt material on road surface of concrete pavement, sand, calcium chloride and old oil were used with different amount of each cases.

• Tribology and Lubricants
• /
• v.30 no.1
• /
• pp.29-35
• /
• 2014

The temperature-dependent tribological properties of brake discs for a train were examined in this study. The discs were produced using heat-resistant alloy steel, which showed different thermal conductivity after the heat treatments. A commercial brake friction material was used to evaluate the friction effectiveness, and the friction tests were carried out using a 1/5 scale dynamometer under various initial braking temperature conditions. The results showed that the tribological property of the disc was strongly affected by the heat treatment schedule. At low temperatures (below $250^{\circ}C$), the friction coefficient increased as a function of disc temperature, indicating that frictional heat increased the adhesion between the disc and pad. In addition, fade was observed at high temperatures (above $250^{\circ}C$); it was pronounced in the case of the disc with low thermal conductivity. The different fade resistances observed in the discs with different heat treatment schedules appear to be influenced by microstructural changes such as carbide redistribution occurring during the heat treatments, which affected the thermal conductivity.

• Air Cleaning Technology
• /
• v.28 no.1
• /
• pp.29-40
• /
• 2015

중국의 급속한 산업화로 대기, 수질, 폐기물 등 환경오염문제가 심화, 고착화되면서 이를 개선하기 위해 중국 정부는 환경규제를 지속적으로 강화하고 있다. 또한 외국인 투자유치로 제조업 육성에 어느 정도 성공을 거둠에 따라 외국인 투자 유치와 제조업 경영활동에 있어 환경 이슈를 매우 중요시하고 있어 신규 및 사업확장에 제동이 걸리고 있다. 중국은 신규법인수 기준으로 우리나라의 최대 해외직접투자국이며, 제조업종에 대한 투자금액이 전체 투자금액의 88.3%를 차지하고 있다. 중국에 진출한 기업들은 중소기업이 전체 진출기업의 약 90%로 중국의 환경규제 강화는 중국에 진출한 우리 중소기업들에게 직접적인 영향을 미치고 있다. 중국 정부는 분야별 환경목표를 강화하고 오염물질배출 업체를 퇴출시키는 등 강력한 조치를 전개하고 있으며, 중앙 정부의 환경목표 강화 기조와 더불어 해당 지역민의 친환경에 대한 요구가 점차 커짐에 따라, 각 지방정부는 환경 관련 지역 목표 달성을 위해 업체 관리감독을 대폭 강화하고 있는 추세이다. 이러한 중국의 환경규제 강화는 진출 기업이나 진출을 준비하는 기업들의 설비투자비나 오염배출비용 부담 증가 등 상당한 리스크로 작용하고 있으며 향후에도 중국의 환경규제 강화 기조는 지속될 것으로 전망된다. 실제 중국에 진출한 기업들은 환경규제를 직접적으로 체감하고 있다. 규제집행의 강도가 눈에 띄게 높아져 엄격한 기준을 적용받고 처벌수위 역시 높아졌으며, 과거 관시를 통해 원만한 해결이 가능했다면 이제는 환경규제에 대해 원칙적이고 보수적인 공무원의 태도로 인해 관시로도 해결이 어려운 경우가 다반사이다. 또한, 주민들도 환경규제에 대한 인식수준이 높아짐에 따라 미미한 사안에도 즉각적인 반응을 보여 민원제기 사례가 빈번히 발생하고 환경안전 기준이 점점 높아짐에 따라 이에 대응하기 위해 환경안전 설비추가, 친환경연료 사용 등 추가적인 비용이 발생하고 있다. 이에 이미 진출한 기업들은 소재지 환경규제의 강화 전망 및 이로 인한 손실정도를 사전에 파악하고 다양한 옵션에서 대응전략을 마련해야 하며, 향후 중국 진출계획을 가지고 있는 기업들은 진출에 앞서 지역별로 차별화된 시장기회와 환경규제 강도 등 현지 실사를 통한 현장중심 리스크 분석을 실시해야 한다. 또한 이미 진출한 기업 및 진출예정 기업 모두 환경규제가 강화되고 있는 중국에서 사업을 하기 위해서는 법규와 기본원칙을 반드시 준수하고 규제가 더 강화될 것 이라는 기조를 인식할 필요가 있다.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.125-132
• /
• 2012

In this paper, We proposes FE-SM/SONN for recognizing blurred and smeared skid mark image caused by sudden braking of a vehicle. In a blurred and smeared skid marks, tread pattern image is ambiguous. To improve recognition of such image, FE-SM/SONN reads skid marks utilizing Fuzzy Logic and distinguishing tread pattern SONN(Self Organization Neural Networks) recognizer. In order to substantiate this finding, 48 tire models and 144 skid marks were compared and overall recognition ratio was 89%. This study showed 13.51% improved recognition compared to existing back propagation recognizer, and 8.78% improvement than FE-MCBP. The expected effect of this research is achieving recognition of ambiguous images by extracting distinguishing features, and the finding concludes that even when tread pattern image is in grey scale, Fuzzy Logic enables the tread pattern recognizable.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.951-956
• /
• 2011

CAN communication developed for communication between electric control devices in vehicle, was recently applied to automatic breaking devices, and can also be applied to field bus for production automation. Recently, field bus is introduced in engine control etc., for large ship. In this paper, cabin access control system is implemented, based on CAN communication. The cabin access control system based on CAN communication consists of access control server, embedded system based on ARM9, and micro-controller built-in CAN controller. The access control server can be able to manage overall access control system by accessing with manager. And embedded system adopted ARM9 processor transmits access information of RFID reader controller connected with CAN networks to server, also performs access control. The embedded system carry CAN frames to server, so it is used as gateway.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.399-404
• /
• 2005

In this paper, An immunized PID(I-PID) controller based on cell mediated immune response is proposed to improve the control performance of the controller with PID scheme. And it is applied to the vibration of the building structure in the port with active damper systems. The immune system of organism in the real body regulates the antibody and T-cells to protect the attack from the foreign materials which are virus, germ cell, and other antigens. It has similar characteristics that are the adaptation and robustness to overcome disturbances and to control the plant of engineering application. At firstly, we build a model of the T-cell regulated immune response mechanism. We have also designed an I-PID controller focusing on the T-cell regulated immune response of biological immune system. Finally, we show that some computer simulations of the vibraton control for the building structure system with wind force excitation. These results for the proposed method also show that is has performance than other conventional controller design method.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.2 no.1
• /
• pp.154-163
• /
• 2010

The object of this study is to investigate the penetration characteristics according to the change of stacking sequences and curvature radius in the composite laminated shell. They are staked to [02/902]S and [0/902/0]s, their interlaminar number are two and four. We are manufactured to composite laminated shells with various curvature radius. Curvature radius of composite shell is 100, 150, 200mm and ${\infty}$(it's meaning flat-plate). In general, kinetic energy after impact-kinetic energy before impact increased linearly in all specimens. Absorbed energy increased linearly as the curvature increased, and absorbed energy of [02/902]S specimen, which is small interlaminar number, was higher than [0/902/0]s specimen.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.283-289
• /
• 2018

In automotive disc brake systems, frictional heat is not uniformly dispersed for reasons such as heat flux and thermal deformation. The thermoelastic deformation due to the frictional heat affects the contact pressure distribution and the contact load may be concentrated on the contact portion on the the disc brake surface, resulting in thermoelastic instability. In this study, thermal analysis and thermal deformation analysis considering the contact between disk and pad occurred during braking through 3D axial symmetry model with reference to the experimental equation and Kao's analysis method of contact pressure of disk and pad. ANSYS is used to analyze the thermal and elastic instability problems occurring at the contact surface between the disk and the pad, considering both the thermal and mechanical loads. A 3D axisymmetric model with direct contact between the disk and the pad was constructed to more accurately observe the thermal behavior of the disk by observing the frictional surface temperature, thermal deformation and contact thermal stress of the disk.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.287-292
• /
• 2019

This paper analyzes the thermal behaviors of genuine discs used in automobiles and discs coming out of tuning products through FEM analysis. Modeling with genuine disk modeling and tuning disks Model-1, Model-2, Model-3 and analyzing the disk rotation speed was set to 1000rpm. When the brake is operated, the thermal behavior of the disk surface, such as the operating temperature caused by the disk and pad contact, the friction surface temperature after the disk stop, and the thermal deformation, were analyzed. When the brake was activated (0-4.5 seconds), the tuning disk showed 34℃ higher than the original disk, and after the disk stopped (40.5 seconds), the tuning disk was analyzed 18℃ lowe, deformation due to the disk heat was deformed by 0.3mm for the tuning disk. Although there is an effect to reduce the fading phenomenon due to the thermal behavior of the pure disk and the tuning disk, it can be observed that there is no significant change in the thermal behavior due to the hole processing and the disk surface processing of the tuning disk.

• Journal of Korean Foot and Ankle Society
• /
• v.12 no.2
• /
• pp.117-121
• /
• 2008

Purpose: To determine the clinical and radiographic results of arthroereisis using the $Kalix^{(R)}$ implant (Newdeal, Lyon, France) for the treatment of flexible flatfoot deformity. Materials and Methods: From February 2005 to February 2007, we performed the subtalar arthroereisis on 8 patients (9 feet) of symptomatic flexible flat feet after more than 6 months of conservative treatment. Average age was 14.5 years ($11{\sim}29$ years) old. We checked the functional status with AOFAS functional score pre-operatively and at final follow-up. Radiologically, we took weight bearing anterior to posterior and lateral view of the feet, and measured the talo-first metatarsal angle, calcaneal pitch angle in pre-operatively and at final follow-up. Results: Mean follow up period was 34.4 months. Average AOFAS score improved from preoperatively 65.6 to postoperatively 94.8. Average lateral talo-first metatarsal angle reduced from $12.8^{\circ}$ preoperatively to $1.6^{\circ}$ at final follow-up. Average anterior to posterior talo-first metatarsal angle was reduced from $15.1^{\circ}$ preoperatively to $8.3^{\circ}$ at final follow-up. Average calcaneal pitch angle was increased from $9.5^{\circ}$ preoperatively to $12.0^{\circ}$ at final follow-up. Conclusions: Subtalar arthroereisis with Kalix$K^{(R)}$ implant can be considered to be one of treatment options symptomatic flatfoot deformity patients.