• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.341-351
• /
• 2008

This study investigated the effect of intermittent polymerization on the rate of polymerization shrinkage and cuspal deflection in composite resins. The linear polymerization shrinkage of each composite was measured using the custom-made linometer along with the light shutter specially devised to block the light at the previously determined interval. Samples were divided into 4 groups by light curing method; Group 1) continuous light (60s with light on); Group 2) intermittent light (cycles of 3s with 2s light on & 1s with light off for 90s): Group 3) intermittent light (cycles of 2s with 1s light on & 1s with light off for 120s); Group 4) intermittent light (cycles of 3s with 1s light on & 2s with light off for 180s). The amount of linear polymerization shrinkage was measured and its maximum rate (Rmax) and peak time (PT) in the first 15 seconds were calculated. For the measurement of cuspal deflection of teeth, MOD cavities were prepared in 10 extracted maxillary premolars. Reduction in the intercuspal distance was measured by the custom-made cuspal deflection measuring machine. ANOVA analysis was used for the comparison of the light curing groups and t-test was used to determine significant difference between the composite resins. Pyramid showed the greater amount of polymerization shrinkage than Heliomolar (p < 0.05). There was no significant difference in the linear polymerization shrinkage among the groups. The Rmax was group 4 < 3, 2 < 1 in Heliomolar and group 3 < 4 < 2, 1 in Pyramid (p < 0.05). Pyramid demonstrated greater cuspal deflection than Heliomolar. The cuspal deflection in Heliomolar was group 4 < 3 < 2, 1 and group 4, 3 < 2, 1 in Pyramid (p < 0.05). It was concluded that the reduced rate of polymerization shrinkage by intermittent polymerization can help to decrease the cuspal deflection.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.2
• /
• pp.30-37
• /
• 2018

The uniformed regulations for control of the height of buildings owned by individuals to protect landscape of cultural properties are causing serious social conflicts by limiting the development of landowners. It is urgent need of introducing indicators that can resolve such conflicts and evaluate the regulations of buildings, which can satisfy urban development as well as landscape management of cultural properties. Therefore, the purpose of this study is to simulate landscape changes according to the Cultural Heritage Protection Act and National Land Planning and Utilization Act by using Unity3D in the Pungnammun Gate(Treasure No. 308) of Jeonju and its surroundings, where architectural cultural property forms the symbolic landscape of the city. Then some items such as view points, target points were introduced and the quantitative evaluation of landscapes was attempted by applying the indicator of 3D Visual Exposure. As a result, the viewing opportunity and viewing area of Pungnammun Gate were not significantly influenced by changes in landscape according to the two laws. However, the change of the height of buildings by the National Land Planning and Utilization Act, which has the greatest development capacity, confirmed the possibility of weakening the identification of the Pungnammun Gate by increasing 3D Visual Exposure of the background buildings more than two times. Finally, it was confirmed that the skyline of Pungnammun Gate was clearly infringed upon development under the National Land Planning and Utilization Act, but the skyline was maintained similar to the current situation in the regulation by the Cultural Heritage Protection Act. Thus, this study is meaningful in that the application of 3D Visual Exposure showed the possibility of utilization as an indicator for quantitatively evaluating the protection of view on cultural property and skyline according to the changes of building heights.

• The KIPS Transactions:PartA
• /
• v.11A no.5
• /
• pp.383-390
• /
• 2004

This paper propose a method that controls facial expression of 3D avatar by having the user select a sequence of facial expressions in the space of facial expressions. And we setup its system. The space of expression is created from about 2400 frames consist of motion captured data of facial expressions. To represent the state of each expression, we use the distance matrix that represents the distances between pairs of feature points on the face. The set of distance matrices is used as the space of expressions. But this space is not such a space where one state can go to another state via the straight trajectory between them. We derive trajectories between two states from the captured set of expressions in an approximate manner. First, two states are regarded adjacent if the distance between their distance matrices is below a given threshold. Any two states are considered to have a trajectory between them If there is a sequence of adjacent states between them. It is assumed . that one states goes to another state via the shortest trajectory between them. The shortest trajectories are found by dynamic programming. The space of facial expressions, as the set of distance matrices, is multidimensional. Facial expression of 3D avatar Is controled in real time as the user navigates the space. To help this process, we visualized the space of expressions in 2D space by using the multidimensional scaling(MDS). To see how effective this system is, we had users control facial expressions of 3D avatar by using the system. As a result of that, users estimate that system is very useful to control facial expression of 3D avatar in real-time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.4
• /
• pp.304-310
• /
• 1981

In order to observe the degree and response of drought-resistance and its physiological mechanism in barley and wheat, 5 species (16 cultivars) were tested for changes in plant height, seedling dry weight, chlorophyll content, leaf relative turgidity, soluble protein, reducing sugar and growth of seedling subjected to water stress by withholding watering for 8 days at 10 days (at the 3rd leaf stage) after emergence. The average rate of decrease of all cultivars was 15% in plant height, 24% in seedling dry weight, 32% in chlorophyll content, 27% in leaf relative turgidity, and 27% in protein. But reducing sugar content of control was increased 4 folds more than that of water stress. In the decreased rate of seedling dry weight of each cultivar, rye was shown to be lowest rate, and Baegdong, Mokpo #55, and 3 two-row barley were shown to be the highest rate. The degree of the decreased rate in 5 species was in the order of rye < < wheat < covered barley < naked barley < two-row barley. in the decreased rate of chlorophyll content, rye, Cheonggaemil and Olmil are the lowest group, and the highest one are Milyang #12, Bangsa #6, Hyangmaeg and Sacheon #4. In the decreased rate of leaf relative turgidity, the lowest group (22-25%) were rye, Cheonggaemil and Dongbori #1, and, on the other hand, the highest group (30-33%) were Baegdong and 3 two-row barley. In the decreased rate of soulble protein, the lowest group (14-17%) were Chogwang, Geurumil, Dongbori #1, and Mokpo #55, and the highest one was 3 two-row barley. The increased ratio of reducing sugar of water stress to control was 4 to 5 folds in rye and wheat, and about 2 folds in naked barley and 3 two-row barley. The degree of the increased ratio of 5 species was in the order of rye > wheat > covered barley > naked barley > two-row barley. In terms of the physiological and adaptive metabolism during the processing leading to drought-resistance, the degree of drought-resistance of 5 species to water stress at seedling stage was shown to be in the order of rye > wheat > covered barley > naked barley > two-row-barley.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.281-302
• /
• 2014

Human beings have advanced to release instinctive desire. Among the human desires, sexual desire is classed as a basic desire with appetite and has been expressed in many ways from prehistoric times to present. Despite the social and ethical restriction, expression of sexual image has been evolved with change of time and medium's development. Thanks to inventing the photograph technique, Change of pornographic image has showed a dramatic aspect since early 20th century. The video which delivers message more directly than the picture boosted this change, and the animation has experimented the expression methods and techniques numerously exceeding the limit of realistic image which reappeared by the device. In this thesis, I want to discuss how human beings express sexual desire in animation based on society's sex culture, and analyzed Japanese pornographic animation as its obvious cases. Japanese pornographic animation should be interpreted as the result of culture and society system's history. Through Heian, Edo and early Meiji period, Japanese sex culture has been kept very openly and preposterously. Transformation, metamorphosis, pedophilia, tentacle sex and exposure of specific body parts that are frequently appear in Japanese animation can be interpreted by ancient Japanese open sex culture like Wakashu, polygamy, sleeping in mixed sex group and pederasty. These Japanese odd sex culture is hard to find elsewhere and settled as intrinsic sexual expression in Japanese animation. This situation was institutionally severed by European Modernization's force at the end of World War II in 20th century. However, it seems they have been keeping their influence in a proper form until now. In this study, I discussed that pornographic animation should be interpreted in a frame of cultural phenomenon by researching the series of procedure that ancient Japanese open sex culture has been changed by the system. Sexuality which is found in general Japanese animation was started from their history, and the dichotomous expression about women can be understood that it is bent by institutionally regulated sexual opinion. Japanese history and culture can be understood that it is transformed to the dichotomy that are simultaneously according freedom of eroticism to the pornographic animation, and the fear and irresistible temptation about the woman's body as the other.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.334-342
• /
• 2016

Conventional eco-design has been implemented based only on the environmental aspects of a product. Key components of a product identified from the analysis of the environmental aspects have been the target for improvement in the conventional eco-design. The use of eco-design index (EDI) considering both the environmental and economic aspects, and utility value (UV) of a product can be envisaged as an alternative way of implementing and assessing the eco-design. The objective of this study was to propose the logic of the EDI and apply it to the components for performing printing function of the multi-function printer. The EDI was formulated by quantifying the UV, life cycle environmental impact (LCE) and life cycle cost (LCC) of the components of a product, here components of the printer. Of the eight components investigated, roller was identified as the best performing consumable in both the environmental and economic aspects. However, its UV was the lowest among the eight. The EDI of the roller was mere $4^{th}$ in ranking out of the eight. Transfer belt ranked $8^{th}$ and $5^{th}$ in the environmental and economic aspects, respectively, while $2^{nd}$ in the utility value with its EDI ranked $3^{rd}$. This indicates that not only the environmental aspects but also economic and utility value aspects should be considered when identifying the key components for improvement in the eco-design.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.261-272
• /
• 2006

As we cannot think of our lives without a nation, it is closely related to almost every part of our daily lives. The role of government is becoming more important in the complex modern society as an essential element of national authority even though the government has indirect and secondary characteristics in its functional performance. Therefore, the government has to be efficient in planning and executing its policies, and it needs to be representative and fair as part of a national authoritative community. In the 21st century when symbolic and cultural importance of images are becoming more important, it is crucial for the government organizations to have an integrated identity design system that can satisfy both of these requirements of the government. However, the C.I.(Corporate Identity) of each Korean administrative branch has been developed separately and sporadically, which resulted in lack of consistency as part of the government. Shape and material of their C.I.s that follow short term design trend and popularity also lack uniqueness which can be distinguished from those of any private corporation. This may show that our government lacks systematic administrative capability, since image of a feature represents its characteristics and reality, and their recognition and evaluation from others become identity of the feature. In this perspective, the purpose of this thesis is to suggest an identity design system that has certain rules and regularity with wide variety of possible alterations for the central administration in Korea. In order to represent this visually, identity design system with both integrity and variety of possible alteration is created based on traditional Korean culture, especially the concept of Umyang-ohaeng and Samjae.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.281-287
• /
• 2011

BACKGROUND: According to Korean regulations, bottled waters (BWs) can not be treated with chemical disinfectants like chlorine, so UV and ozone disinfection is applied. During the past several years, chemicals were detected in some BWs, and the public was concerned about the safety of BWs. METHODS AND RESULTS: Mineral waters were stored for 180 days at $25^{\circ}C$ and $50^{\circ}C$, tested acetaldehyde and formaldehyde by HPLC. When mineral waters were put in a PET bottles, the formaldehyde level ranged from 5 to $66{\mu}g/L$ during 180 days at $50^{\circ}C$. While the acetaldehyde level ranged from 31 to $221{\mu}g/L$, it was low than $16{\mu}g/L$ in glass bottle. CONCLUSION(s): This result showed that formaldehyde and acetaldehyde were detected higher in PET bottles than glass bottles, these also increased depending on the time of storage. Concentration of formaldehyde and acetaldehyde could be significantly influenced by the time of storage and temperature.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.49-54
• /
• 2002

Purpose : To analyze the clinical results of treatment for the osteochondritis dissecans of femoral condyle by age, the type of lesion and method of treatment. Methods : From March 1991 to February 2000, 17 patients (20 cases) with osteochondritis dissecans of the femoral condyle were followed up over 1 year. Three patients had bilateral lesion. There were 12 cases with trauma history (9 cases with sports injury and 3 cases with direct trauma). The initial symptoms were pain, clicking, locking, giving way in the order of frequency, pain was revealed in all cases. Clinical evaluation of IKDC and Hughston method were used for subjective and objective function. Results : The number of male patient was 12, and the mean age was 19.8 year old (11$\~$50). The location of the lesion was 14 cases in medial femoral condyle and 6 cases in lateral femoral condyle. The arthroscopic findings of the lesion in 15 cases were as follows, early separation in 6 cases, partially detachment in 4 cases, and crators and complete detachment in 5 cases. 5 cases were treated with mutiple drilling and 5 cases with Herbert screw fixation, 3 cases with Herbert screw fixation and bone graft. In early stage, 7 cases were treated with conservative method. In the grading of Hughston score, 6 cases were graded as excellent, 9 cases as good, 15 cases were graded as good to excellent. Based on the IKDC scale, 1 case was graded as normal, 6 as nearly normal, and 10 as abnormal. Conclusions : The trauma seemed to be important factor in occurrence of osteochondritis dissecans of the femoral condyle. The clinical results of juvenile period showed better than adolescence and adult period, it is necessary to detect the lesion as soon as possible. The result of subjective evaluation was worse than the Hughston evaluation. It was caused by limiting involvement of sports activity and limited activity in the adolescence.

• Journal of Nutrition and Health
• /
• v.50 no.5
• /
• pp.504-518
• /
• 2017

Purpose: The objective of this study was to develop a processed foods database (DB) for estimation of processed food intake in the Korean population using data from the Korea National Health and Nutrition Survey (KNHANES). Methods: Analytical values of processed foods were collected from food composition tables of national institutions (Development Institute, Rural Development Administration), the US Department of Agriculture, and previously reported scientific journals. Missing or unavailable values were substituted, calculated, or imputed. The nutrient data covered 14 nutrients, including energy, protein, carbohydrates, fat, calcium, phosphorus, iron, sodium, potassium, vitamin A, thiamin, riboflavin, niacin, and vitamin C. The processed food DB covered a total of 4,858 food items used in the KNHANES. Each analytical value per food item was selected systematically based on the priority criteria of data sources. Results: Level 0 DB was developed based on a list of 8,785 registered processed foods with recipes of ready-to-eat processed foods, one food composition table published by the national institution, and nutrition facts obtained directly from manufacturers or indirectly via web search. Level 1 DB included information of 14 nutrients, and missing or unavailable values were substituted, calculated, or imputed at level 2. Level 3 DB evaluated the newly constructed nutrient DB for processed foods using the 2013 KNHANES. Mean intakes of total food and processed food were 1,551.4 g (males 1,761.8 g, females 1,340.8 g) and 129.4 g (males 169.9 g, females 88.8 g), respectively. Processed foods contributed to nutrient intakes from 5.0% (fiber) to 12.3% (protein) in the Korean population. Conclusion: The newly developed nutrient DB for processed foods contributes to accurate estimation of nutrient intakes in the Korean population. Consistent and regular update and quality control of the DB is needed to obtain accurate estimation of usual intakes using data from the KNHANES.