• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.131-134
• /
• 2005

PDP 방전 셀의 최적화 및 진공자외선 발광효율을 향상시키기 위한 목적으로 AC - PDP 미소방전에서 제논 여기종 원자의 밀도를 측정하는 레이저 흡수법을 개발하였다. 본 연구에서는 PDP 셀의 기체 압력을 350Torr, 제논 함량 10%로 고정하고, 전극 위에서의 여러 위치에서 준안정 준위 제논의 밀도를 흡수법으로 측정하였다. 실험 결과 제논 여기종의 밀도의 최대값은 전극의 위치(가장자리에서 안쪽으로의 거리)가 $50{\mu}m$, $120{\mu},\;150{\mu}m$ 일 때 $3.5{\times}10^{12}cm^{-3}$, $2.8{\times}10^{12}cm^{-3}$, $2.2{\times}10^{12}cm^{-3}$로 나타났다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.4
• /
• pp.322-330
• /
• 2008

The properties of discharge, luminance, and spectroscopy are investigated in a longitudinal and transverse discharge fluorescent lamps with tube of outer diameter 4 mm. The sample lamps are prepared to be three kinds of gas composition such as mercury lamps of Ne(95%)+Ar(5%)+Hg(2 mg), the mercury-free lamps of Xe 100% and Ne+Xe(4%). The gas pressure is in the range of $5{\sim}300\;Torr$. In the mercury lamps, the longitudinal discharge having a positive column is high in luminance and efficiency, while the transverse discharge is no luminance at all. In the Xe-lamps, the transverse discharge shows relatively good in efficiency as compared with the longitudinal discharge which has a high discharge voltage and a low luminance and efficiency. In the transverse discharge of relatively high efficiency, a pure Xe(100%) gas discharge has a higher efficiency than the mixture gas of Ne+Xe(4%). Through these experiments, the properties of mercury and xenon lamps are verified. In the mercury lamps, the longitudinal discharge of tubular fluorescent lamps is high in luminance and efficiency, while the transverse discharge of flat panel fluorescent lamps are low in luminance efficiency. In the mercury-free lamps, the flat fluorescent lamps of transverse discharge having a high pressure ${\sim}100\;Torr$ with the pure Xe-gas are verified to be suggestable.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.116-121
• /
• 2010

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.483-488
• /
• 1999

The optimal mixing condition of four components gas(Ne,Xe,He,Ar) in PDPs was caculated by a numerical simulation method. The dominated reactions in which $Xe^*(^3P_1)$ is produced and decays were investigated in three components gas (Ne,Xe,He) and our new components gas (Ne,Xe,He,Ar). A peak point of $Xe^*$ density appears in the range of 0.1% to 2% of Ar mixture ratio. The results of simulation show that the direct exitation of Xe by electrons has the greatest influence on the inceasing $Xe^*$ density in both gas mixtures.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.180-182
• /
• 2008

제논램프를 점등시키기 위해서는 램프방전 초기에 수십kV의 고전압펄스를 발생시켜주어야 한다. 고전압펄스의 생성은 주로 transformer의 전자기유도작용을 이용한다. 지금까지는 주로 1개의 고주파 transformer를 이용하여 고전압펄스를 발생시키는 회로가 구성되어 왔다. 이 경우 회로가 단순해지는 이점이 있지만 transformer의 부피가 커지게 되어 상대적으로 보드에서 많은 공간을 차지하게 되는 단점이 있다. 따라서 본 논문에서는 기존의 단점을 해결하고자 고주파 transformer 1개를 사용하는 대신 소형의 고주파 transformer 2개를 2단계 step-up 회로로 구성하였다. 제안된 회로의 구성과 동작에 대하여 분석하였고 실험을 통해 제안된 회로가 유용함을 검증하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.493-502
• /
• 2010

In this paper, the ionization characteristics of noble gases are studied numerically behind strong shock waves. As a first step, the equilibrium ionization mechanism of noble gases is modeled in wide ranges of temperature and pressure. As a next step the equilibrium ionization model is coupled with fluid dynamic equations to analyze the local thermodynamic equilibrium(LTE) ionization process at high temperature and pressure conditions behind the strong imploding shock waves. The ionization characteristics of xenon gas is studied in a wide range of test conditions with thermal radiation effects. Hence, the results give optimal conditions of maximum ionization and radiation behind the imploding shock waves.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.485-486
• /
• 2009

• 대한방사선방어학회:학술대회논문집
• /
• 2010.04a
• /
• pp.184-185
• /
• 2010

• Proceedings of the KIEE Conference
• /
• 1983.07a
• /
• pp.120-122
• /
• 1983

• Korean Journal of Optics and Photonics
• /
• v.30 no.5
• /
• pp.197-203
• /
• 2019

In this paper, we studied a reflector design that can improve the illuminance uniformity when using a xenon flash lamp in the photonic sintering process. To achieve complete sintering of substrates in the irradiated area, the light efficiency and illuminance uniformity were set to target performance. Existing elliptical reflectors or parabolic reflectors make it easy to satisfy the target light efficiency, but have difficulty satisfying the illuminance uniformity. In this paper, a twin-concave feature has been added to the center of the parabolic reflector to satisfy the illuminance uniformity. It was confirmed that the illuminance uniformity of the parabolic reflector with a twin-concave feature was improved, compared to that of the traditional reflector.