• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.80-93
• /
• 2022

This study is a study on a methodology that can extract various factors that affect purchase and use of products/services from the consumer's point of view through previous studies, and analyze the types and tendencies of consumers according to age and gender. To this end, we quantify factors in terms of general personal propensity, consumption influence, consumption decision, etc. to check the consistency of data, and based on these studies, we conduct research to suggest and prove data analysis methodologies of consumer types that are meaningful from the perspectives of startups and SMEs. did As a result, it was confirmed through cross-validation that there is a correlation between the three main factors assumed for data analysis from the consumer's point of view, the general tendency, the general consumption tendency, and the factors influencing the consumption decision. verified. This study presented a data analysis methodology and a framework for consumer data analysis from the consumer's point of view. In the current data analysis trend, where digital infrastructure develops exponentially and seeks ways to project individual preferences, this data analysis perspective can be a valid insight.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.215-222
• /
• 2005

In this paper, we propose a fingerprint verification algorithm for the embedded system based on the minutia extracted using the image quality, the minutia structure, and the Sequency and the orientation of ridges. After the pre- and the post-processing, the true minutia are selected, thus it shows high reliability in the fingerprint verification. In matching process, we consider the errors caused by shift, rotation, and pressure when acquiring the fingerprint image and reduce the matching time by applying a local matching instead of a full matching to select the reference pair. The proposed algorithm has been designed and verified in Arm920T environment and various techniques for the realtime process have been applied. Time taken from the fingerprint registration through out the matching is 0.541 second that is relevant for the realtime applications. The FRR (False Reject Rate) and FAR (False Accept Rate) show 0.079 and 0.00005 respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.122-130
• /
• 2012

In this paper, we propose a broadband vehicle antenna that can operate at the WiBro band(2.3~2.4 GHz) for a wireless internet service. The feeding of the proposed antenna consists of two T-matching networks on both side of the polyarcylate substrate, and the two T-matching networks are connected through via holes. The designed antenna was built and installed on a rear window of a commercial sedan, and the antenna performances, such as the reflection coefficients and the radiation gain are measured in the open-sight area. The received signal strength of the designed antenna was also tested in a strong field area as well as in a weak field area. The measurement results show the matching bandwidth($S_{11}$ <10 dB) of about 300 MHz in the WiBro band and the average gain of about -5.13 dBi along the azimuth direction.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.67-77
• /
• 2021

Spatial data is becoming very important as a medium that connects various data produced in smart cities, digital twins, autonomous driving, smart construction, and other applications. In addition, the rapid construction and update of spatial information is becoming a hot topic to satisfy the diverse needs of consumers in this field. This study developed a software prototype that can match the position of an image-based 3D building model produced without Ground Control Points using existing spatial data. As a result of applying this software to the test area, the 3D building model produced based on the image and the existing spatial data show a high positional matching rate, so that it can be widely used in applications requiring the latest 3D spatial data.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.123-135
• /
• 2011

The domestic market of database in Korea is estimated to be over 3.663 trillion won. The data migration is getting to be more important along with the continuous growth of the database industry. g-CRM and private recommending function are examples of the service that can be given through coupling among customer database, product database, geographic information database, and others. The core infrastructure is also the database which is integrated, perfect, and reliable. There are not enough researches on efficient way of data migration and integrating process and investigation of migrated data though trends of database in IT environment as above. In connection with this issue, we have made a model for data migration on scientific and technological contents and suggest the result of data migration process adapting that model. In addition, we verified migration's exhaustiveness, migration's consistency, and migration's coherence for investigation of migrated data and database. From the result, we conclude data migration based on proper model has a significant influence on the database consistency and the data values correctness and is essential to maintain high qualified database.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.109-117
• /
• 2014

This paper presents a superresolution restoration technique that can restore high-resolution images from differently blurred low resolution images rather than using the motion information between low-resolution images. In order to restore the super-resolution image the rotatable aperture mask lens system is proposed. The proposed technique does not need to estimate point spread function at each frame. In addition, it does not require image registration because there is no global translational motion between low resolution images. By using a rotatable rectangular aperture, two consecutive captured images provide sufficiently exclusive information for superresolution. Therefore, the proposed method can reduce the registration error between the low-resolution image as well as the calculation amount for superresolution restoration. The existing lens system of the camera can be extended to obtain a superresolution image by only adding an rotatable rectangular aperture mask. Finally, in order to verify the performance of the proposed system, experimental results are performed. By comparing with the existing superresolution methods, the proposed method showed the significant improvements in the sense of spatial resolution.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.69-80
• /
• 1999

Recently, social requirements of personal identification techniques are rapidly expanding in a number of new application ares. Especially fingerprint recognition is the most important technology. Fingerprint recognition technologies are well established, proven, cost and legally accepted. Therefore, it has more spot lighted among the any other biometrics technologies. In this paper we propose a new on-line fingerprint recognition algorithm for non-inked type live scanner to fit their increasing of security level under the computing environment. Fingerprint recognition system consists of two distinct structural blocks: feature extraction and feature matching. The main topic in this paper focuses on the feature matching using the fingerprint minutiae (ridge ending and bifurcation). Minutiae matching is composed in the alignment stage and matching stage. Success of optimizing the alignment stage is the key of real-time (on-line) fingerprint recognition. Proposed alignment algorithm using clique shows the strength in the search space optimization and partially incomplete image. We make our own database to get the generality. Using the traditional statistical discriminant analysis, 0.05% false acceptance rate (FAR) at 8.83% false rejection rate (FRR) in 1.55 second average matching speed on a Pentium system have been achieved. This makes it possible to construct high performance fingerprint recognition system.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.43-48
• /
• 2022

In this study, simulation method was developed to improve the accuracy of the warpage simulation based on the equivalent anisotropic viscoelastic model. First, a package with copper traces and bumps was modeled to implement anisotropic viscoelastic behavior. Then, equivalent anisotropic viscoelastic properties and thermal expansion coefficient for the bump region were derived through the representative volume element model. A thermal cycle of 0 to 125 degrees was applied to the package based on the derived mechanical properties, and the warpage according to the thermal cycle was simulated. To verify the simulation results, the actual package was manufactured, and the warpage with respect to the thermal cycle was measured through shadow moiré interferometer. As a result, by applying the equivalent anisotropic viscoelastic model, it was possible to calculate the warpage of the package within 5 ㎛ error and predict the shape of the warpage.

• Journal of Korean Society of Transportation
• /
• v.16 no.1
• /
• pp.79-98
• /
• 1998

교통계획의 수립은 사람과 화물의 이동상태에 대한 파악으로부터 시작되며 화물이동상태를 파악 하기 위한 가장 기본적인 데이터는 지역별 발생집중 화물량일 것이다. 이러한 지역별 발생집중 화물량의 추계방법중 추계의 간편성과 경제상황변화의 반영이 용이하다는 점에서, 최근 학자들의 상당한 주목 을 받으며 연구되고 있는 것이 산업연관분석을 응용한 물류해석방법이다. 그러나 이방법은 대상지역의 산업연관표를 기본 data로 하기 때문에 해당지역의 산업연관표의 존재 여부에 따라서 그 적용범위가 제한된다. 이러한 문제점을 해결하기 위해서 연구되고 있는 방법이 Nonsurvey법이다. Nonsurvey법은 대 지역의 산업연관표로부터 그 지역에 포함된 소지역의 산업연관표를 여러 가지 보조적인 데이터를 이용해 서 간접적으로 추계하는 방법이다. 본연구에서는 이러한 Nonsurvey법의 하나로서 대지역의 산업연관표 와 지역분해된 각 소지역의 산업부문별 생산량만을 이용해서 각 소지역의 발생집중화물량을 추계하는 방법을 제안했다. 그리고 일본의 긴키(Kinki)지역과 이에 속하는 4부현을 대상으로 본연구의 방법으로 추계된 이출입양과 실제의 산업연관표상의 이출입량을 비교.분석함으로써 본 연구의 방법에 대한 검증을 실시했다. 본 연구에서 제아한 지역별 발생집중 화물량 추계방법의 특징은 다음과 같다. 첫째, 대지역내 각 소지역간의 이출입량이 분기계수라고 하는 산업관계표의 산업관계표의 행방향의 합에 대한 비율을 사용함으로서 간단히 추계가능 하다. 둘째, 추계된 소지역의 산업관계표는 대지역에 대한 시스템전체의 정합성이 유지된다. 셋째 분해되는 소지역의 수에 관계없이 각소지역의 이출입양에 대한 추계가 가능하다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.4
• /
• pp.397-402
• /
• 2003

This paper concerns a pulse-width-modulation (PWM) controller design technique using digital redesign. Digital redesign is to convert a well-designed analog controller into an equivalent pulse-amplitude-modulation (PAM) controller maintaining the original analog control system in the sense of state-matching. In similar line of conversion concept, the redesigned PAM controller is converted into a PWM controller using the equivalent area principle. To convincingly visualize the proposed technique, an computer simulation example-attitude control of artificial satellite system is included.