• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.3
• /
• pp.230-237
• /
• 1994

This experiment was carried out to determine the effects of cattle sluny and zeolite application for the improvement of germination and establishment of grasses in infertile slopped land. The best establishment and winter survival of grasses were observed in the plot of cattle slurry application. The dry matter yield of grasses was increased by 12% in the plot of compaction + cattle slurry application when compared with control. Alteration effect of soil pH was v q high and the content of organic matter was increased by addition of the soil conditioner.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.310-321
• /
• 2012

This study was conducted to establish collaborative governance for North Korean Refugees' settlement support service. Three major actors were identified. At the central government level, there is no control center to coordinate various functions. This study suggested three roles for central government in collborative governance, which are policy planning based on public value, allocating financial resources to implementing organizations, and program evaluation for securing public accountability. The rloes of local government are establishing communication channels between implementing participants, maintenancing good relations, and coordination. Finally, the role of private actors is developing high quality service programs, connecting local resources for settlement service.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.212-227
• /
• 2012

Current research trends in wood preservatives for enhancing durability was reviewed. Due to leaching of recent Copper-Based Preservatives commonly used as chemicals for pressure treatment; they have been a growing concern, especially in improving the fixation of the copper as alkyl ammonium quat. and azol in wood and preventing the leaching of active ingredients. With the appearance of emulsion type chemicals using micronized and nano-sized wood preservatives, researchs on characteristics of Copper-Based Preservatives regarding penetration and fixation in wood are debatable. Moreover, unlike the case of CCA, the recent alkyl ammonium quat. and azol bear a serious threat in the decrease of antimicrobial effectiveness against wood destroying fungi with copper tolerance. Therefore, development and research of co-biocide is needed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.15 no.26
• /
• pp.43-48
• /
• 1992

국제적으로 증가되어지고 있는 제조업분야의 경쟁으로 인하여 사업체들 간에는 경쟁적으로 이상적인 방법의 공장자동화 (Factory Automation)를 품질향상 및 생산성증가를 위한 한 방법으로 채택하고 있다. 치열해지는 경쟁력으로부터 시장을 고수하기 위해 공장자동화가 기업들 간에는 근본대책으로 설정되고 있는데, 이러한 경향은 사업체들이 보다 나은 품질의 제품을 저렴한 가격으로 소비자에게 제공하고 생산력향상을 경제적으로 달성하기 위하여 많은 액수의 비용을 투자하게끔 하고 있다. 현재 여러 종류의 공장자동화 방법이 개발되고 있고, 채택되어지고 있다. 그 중에서도 현재 많은 각광을 받고있는 분야가 유동제조시스템(Flexible Manufacturing System ; FMS)이다. 본 연구에서는 유동제조시스템을 공장자동화의 한 방법으로 채택하기 위해 필요한 기본적인 두 가지 요소, 정당화 및 계획과정에 관하여 논하였다. 우선적으로 정당화되어야 할 문제점들 중에는: 1) 유동성에 대한 이해와 경제성에 대한 연구, 그리고 2) 노사관계에 관한 문제점들을 고찰하여 각 기업의 특성에 맞게 조절을 해야한다. 이러한 점들에 대한 이해, 연구, 고찰이 이루어지고 정당성이 성립이된 후에는 유동제조시스템을 점차적으로 정착시킨다. 이 진행과정에서 성립되어야 할 점들은 다음과 같다. 첫째, 시스템 채택방법을 택하고, 둘째, 분임조를 결성시켜 설정되어진 과제들을 분담하여 해결해 나아가면서 유동제조시스템이 하나의 고유적인 방법으로 회사의 특색 및 실정에 맞게 정착되도록 한다.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1435-1443
• /
• 2016

This study evaluated the sanitary state of seawater and shellfish in Yeoja bay from January 2014 to June 2016. The sampling stations for sanitary survey in Yeoja Bay was composed of 50 stations for seawater and 4 stations for ark shell and the samples have been collected monthly at a stated date. The total and fecal coliforms in seawater and Escherichia coli (E. coli) in shellfish were investigated as sanitary indicator bacteria, respectively. The geometric mean and the estimated 90th percentile ranges of total and fecal coliforms for seawater were <1.8-3.9, <1.8-2.6 and <1.8-29.7, <1.8-9.3 MPN/100 mL, respectively. The range of E. coli levels for ark shell were <20~330 MPN/100 g. The sanitary state in Yeoja bay was evaluated clean area according Korea criteria and conditionally approved area according US criteria and Class B area according EU criteria.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.3
• /
• pp.186-193
• /
• 2012

The wood-concrete composite can be effectively applied for bridge superstructure, and the concept of fully composite action between each member is one of the most important consideration. Until now, related researches have been done mainly in North America and EU countries not enough to cover the fundamental studies. Therefore, this study is planned to perform one of the important issue for using the wood-concrete composite. The objective of this study is evaluation of shear performance with different anchorage length of steel rebar in wood. Prediction of the yield mode and the reference design value was firstly performed as the preliminary investigation. Then, initial stiffness, yield load and maximum load were derived from the shear test due to different anchorage length of the steel rebar (SD30A in Korean Standard) in wood. It was found out from this study that initial stiffness and yield load are not related with the anchorage length over 20 mm of anchorage length while maximum load shows increasing tendency till 60 mm of anchorage length. Pullout strength of inserted steel rebar in wood is considered to be one reason and this was also verified with the x-ray radiography.

• Journal of the Economic Geographical Society of Korea
• /
• v.18 no.1
• /
• pp.17-44
• /
• 2015

This paper aims at elucidating the characteristics of immigration path and residential location, and analyzing the factors influencing housing ownership structure and preference of residential location factors of Korean immigrants in Los Angeles. The main results of this study are as follows. Firstly, immigration paths of Korean Immigrants are divided by spatial assimilation type and network of mainstream society oriented type. Secondly, according to the results of binomial logistic regression analysis, Korean town as a current residential location is selected by low-income class, aged migrants group, housing non-owner group and longer migration period group. Thirdly, migrants tend to retain detached housings in residential area of mainstream society while migration period go beyond 10 years and incomes exceed $60,000. Finally, according to ANOVA tests on the preferences of residential location factors. high-income and home owers groups more prefer location factors such as economics, natural environment, housing interior facilities, network of mainstream society.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.72-80
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the details of hooks cross-constructed at 135 degrees used as external-ties standard detail in RC columns, therefore, to the purpose of improving constructability, the clip-type binding implement was suggested and A total of 28 pull-out specimens were prepared with the parameters of concrete compressive strength and clip-embeded length, clip installation location to examine the anchorage behavior of the clip-type binding implement. The experiment was carried out. The results of the experiment confirmed that the anchorage strength of the clip-type binding implement was higher than the details of hooks cross-constructed at 135-degree regardless of the diameter of tie and concrete strength, embeded clip length, clip installation. and The 90-degree end hook with clip-type binding implement was showed a similar an anchorage behavior of 135-degree end-hooked transverse reinforcement, consequently, The 90-degree end hooked with clip-type binding implement is evaluated to be the same anchorage behavior and performance as standard 135-degree end hook detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.167-175
• /
• 2018

Load transfer experiments have been carried out to evaluate the performance of the anchorage and it has been stated that the specimens were manufactured and tested according to ETAG 013. On the other hand, the amount of spiral reinforcement and auxiliary reinforcement exceeded the amount specified in ETAG 013. In this study, the load transfer test method and the criteria specified in ETAG 013 were considered and the PT anchorage system was applied to manufacture specimens with high strength concrete and a high tensile prestressing strand. A load transfer test according to ETAG 013 was performed to evaluate the performance of the circular anchorage. As a result, it was confirmed that ETAG 013 is a very strict specification that does not satisfy the performance of an anchorage unless the specimens of an appropriate size and spiral reinforcement are used. To assess the stability of the specimens, increasing the size of the specimen by 15%, rather than increasing the amount of auxiliary reinforcement, is considered to be the correct method in accordance with ETAG 013.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.57-66
• /
• 1999

This paper describes a 12b, 50 Msample/s CMOS AID converter using an acquisition-time minimization technique for the high-speed sampling rate of 50 MHz level. The proposed ADC is implemented in a $0.35\mu\textrm{m}$ double-poly five-metal n-well CMOS technology and adopts a typical multi-step pipelined architecture to optimize sampling rate, resolution, and chip area. The speed limitation of conventional pipelined ADCs comes from the finite bandwidth and resulting speed of residue amplifiers. The proposed acquisition-time minimization technique reduces the acquisition time of residue amplifiers and makes the waveform of amplifier outputs smooth by controlling the operating current of residue amplifiers. The simulated power consumption of the proposed ADC is 197 mW at 3 V with a 50 MHz sampling rate. The chip size including pads is $3.2mm\times3.6mm$.