• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.780-787
• /
• 2013

Virtual Seat Method (VSM) is used in this study for a combined evaluation method (objective & subjective) to determine comfort value of passenger vehicle seat in terms of idle vibration. In the study, a process for applying VSM divided into two stages is established. Two kinds of seat mounting passenger vehicle and six subjects are employed to compare the comfort value obtained by VSM method and by SEAT value. As a conclusion, the results by the two methods were well consistent so that VSM is verified as a method to measure ride comfort of seat in terms of idle vibration at passenger vehicle.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.631-639
• /
• 2013

Virtual seat method(VSM) which is an evaluation method combined objective and subjective process is used in this study in order to determine seat comfort index of idle vibration of passenger vehicle. The VSM is implemented by two steps which are for objective index in the first step and for subjective estimation in the second step. In the study, two seats mounted on passenger vehicle was compared in terms of dynamic seat comfort by six subjects employed for the VSM method as well as SEAT value which is a conventional objective method. It is concluded that the dynamic comfort index by the VSM is more reliable than the SEAT value thanks to adding subjective evaluation on top of the objective result.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.455-460
• /
• 2012

Thirteen taxi drivers as the subject in the experiment were exposed to vertical vibration which is controlled on a rigid seat reflecting vibration on passenger vehicle. They were employed not only to get human response of objective measurement but also to make subjective evaluation of the vibration. The subjective evaluation was estimated using the absolute discomfort threshold of the controlled vibration, which was achieved with the three-down one-up method that is widely used in the field of psychophysics. As the result, apparent mass and apparent eccentric mass as objective human response tend to gradually decrease when frequency of the vibration increases. The absolute discomfort threshold was increased in case of increasing the frequency. Concludingly, the subjective discomfort evaluation is highly correlated with the objective human responses at the range of idle vibration on passenger vehicle.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.5
• /
• pp.422-428
• /
• 2012

Thirteen taxi drivers as the subject in the experiment were exposed to vertical vibration which is controlled on a rigid seat reflecting vibration on passenger vehicle. They were employed not only to get human response of objective measurement but also to make subjective evaluation of the vibration. The subjective evaluation was estimated using the absolute discomfort threshold of the controlled vibration, which was achieved with the three-down one-up method that is widely used in the field of psychophysics. As the result, apparent mass and apparent eccentric mass as objective human response tend to gradually decrease when frequency of the vibration increases. The absolute discomfort threshold was increased in case of increasing the frequency. Concludingly, the subjective discomfort evaluation is highly correlated with the objective human responses at the range of idle vibration on passenger vehicle.

• Journal of the Korean Society for Railway
• /
• v.16 no.4
• /
• pp.253-261
• /
• 2013

According to the measured results of KTX brake squeal noise in this study, high level brake noise occurred in a wide frequency range, 100~18,000Hz. To identify the sources of the brake squeal noise, unstable vibration modes due to brake disc/pad interaction were analyzed under various conditions by the finite element method. Complex eigenvalues for a brake unit with a disc and four pads were obtained. It was found that the real parts of the complex eigenvalues, that is, unstable vibration modes, were closely related to friction coefficients, pressure on the brake cylinders, elastic moduli of the components, and other conditions.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.525-526
• /
• 2016

전기자동차 (EV)에서 구동용 모터의 토크 제어를 위한 인버터에는 제어 연산 및 고장 진단 기능을 수행하기 위한 MCU가 있으며, MCU는 상위 제어기 차량 제어 유닛 (VCU)에게 현재 모터 및 인버터의 상태를 주기적으로 전달하고, 현재 차량 주행에 적합한 토크 지령을 받아 토크 제어를 수행하게 된다. 이를 위해 MCU는 전류, 전압 및 위치 센서의 값을 읽어 제어를 수행하게 되며, 제어의 결과 값으로 pulse width modulation (PWM)을 생성하여 이를 통해 모터에 전압을 공급하게 된다. 즉 차량의 구동에 있어 PWM 신호는 가장 중요한 부분이다. 하지만 생산 불량 또는 진동에 의한 납땜 불량 또는 MCU 전원 고장 등으로 MCU에 고장이 발생하게 되면 이상 PWM을 생성하게 되고 정상적인 토크 제어가 불가능해진다. 이때 안전하게 EV를 정지 시키는 알고리즘이 필요하게 되며, 이를 수행 할 supervisor control unit (SCU)가 인버터 컨트롤 보드에 추가되어야 한다. 본 논문에서는 고속으로 주행하던 차량에서 메인 MCU가 고장 날 경우에 안전하게 EV를 정차시키는 방법에 대해 다루었다.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.385-393
• /
• 2015

The speed of train has rapidly been increased in accordance with the developed railway technology. Nowadays, high-speed trains were introduced which has the speed faster than 400 km/h. In Korea, a lots of efforts were undertaken to increase the speed of train faster than 350 km/h, however noise and vibration are still the main problems to solve for realization of the high-speed train. In the case of operation speed faster than 350 km/h, it can be easily presumed that the noise and vibration damages could be increased in the train stations which are close to the passing railway tracks. Thus, the noise in the five different types of high-speed train stations were analyzed including stations built on the ground, underground, under rail, and two types on rail. The present paper predicts noises inside the stations depending on the speed of the passing trains and analyze the noise comparing with noise criteria (NC). Sound insulation performance of each part of buildings was calculated using the transmission noise formula and computer modeling, Finally, a series of processes were introduced to satisfy the aural environment with the optimum interior noise criteria by changing interior finishing materials.