• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.57-58
• /
• 2002

램제트는 다른 여러 추진시스템에 비하여 획기적으로 증가된 사거리를 가지므로 가용범위의 확대는 물론, 목표물 타격 시 높은 명중률과 낮은 격추율을 가지는 효과적인 추진 시스템이다. 램제트 엔진을 장착한 미사일로는 프랑스의 Griffon, ASMP, 미국의 Bomarc, Talos, 영국의 Bloodhound, Sea dart, 소련의 SA4, SA6 등을 비롯하여 많은 종류가 개발되어 실전 배치되었다. 근래 들어 램제트는 군사전략과 전술적인 목적 이외에도 민간용으로도 그 실용성이 강조되고 있어 그 중요성은 날로 더할 것으로 예측된다. 램제트는 일반적인 공기흡입식 엔진과는 달리 엔진 내부에 기계적으로 구동되는 부분이 없이 충격파를 통과하면서 공기의 압력이 높아지는 현상인 램압축 현상을 이용하여 공기를 압축하게 되므로 엔진의 구조가 간단하고, 상대적으로 높은 비추력과 추력/중량비를 가진다. 램제트는 정지 상태에서는 작동되지 않으며 사용 가능한 최소의 압력비를 줄 수 있는 비행 마하수에 도달해야 램제트가 작동하게 된다. 따라서 이러한 비행속도를 줄 수 있는 별도의 추진장치가 필요하게 되는데 이와 같은 보조 추진장치로 부스터를 사용한다. 부스터가 엔진의 내부에 장착된 램제트를 일제형 램제트 (IRR: integral Rocket Ramjet)라 부르며, 현대의 전략미사일과 민간용 초음속 항공기의 엔진에 도입되어 활발한 연구가 진행 중이다. 램압력을 이용하여 압축하므로 램제트의 설계시 설계점 비행 속도에서 전압력 손실이 최소가 되도록 설계되어야 하며, 이를 실험이나 수치해석을 통해 확인하여야 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.719-727
• /
• 2008

A 3-D compressible Navier-Stokes solver using overlapped grids is developed to predict a flow-field around a hovering rotor. The flow solver is verified by a parametric study with the grid spacing of wake grid, spatial accuracy and turbulence model. Computations are performed with different Chimera grid systems. Computational results are compared with the experimental data of Caradonna et al. for both blade loading and the tip vortex behavior. Numerical results show good agreements with experiments for the distribution of surface pressure and tip vortex behavior. Pressure distributions over the blade have marginal differences for different numerical methods, whereas large discrepancies are seen in the prediction of the wake behavior. Results unexpectedly show that the vortex strength from an automated cut-paste Chimera grid is weaker than that from the conventional Chimera grid.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.6
• /
• pp.503-508
• /
• 2007

In this study, the aeroelastic response and stability of bearingless rotors are investigated using a large deflection beam theory. The outboard main blade, flexbeam, and torque tube are all assumed to be an elastic beam undergoing arbitrary large displacements and rotations. The finite element equations of motion obtained from Hamilton's principle. Two-dimensional quasi-steady strip theory is used to evaluate aerodynamic forces. In hover, the modal approach method based on coupled rotating natural modes is used for the stability analysis. In forward flight, the nonlinear periodic blade steady response is obtained by integrating the full finite element equation in time through a coupled trim procedure with a vehicle trim. The results of the full finite element analysis using the large deflection beam theory are compared with those of a previously published modal analysis using the moderate deflection-type beam theory.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.150-157
• /
• 2014

Li-Ion battery is used in the most satellites now due to advantages such as weight, thermal dissipation and self discharge compared to the previous generations of electrochemical batteries. The performance analysis model of the Li-Ion battery is needed to aid the design of new satellite electrical power subsystem. This paper develops the performance analysis model of the Li-Ion battery to apply to the electrical power subsystem design and energy balance analysis on geostationary orbit. The analysis model receives the satellite bus power, solar array power and battery temperature and gives the battery voltage, charge and discharge currents, taper index, state of charge and power dissipation. The results from the performance analysis are compared and analyzed with the flight data to verify the model. The compared results show satisfactory without significant difference with the flight data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.10-16
• /
• 2013

This paper discussed a procedure for noise certification of Aircraft and predicting the full scale over-flight noise of propeller from acoustic wind tunnel measurement of small scale propeller. Noise Certification Procedures is established from International Civil Aviation Organization(ICAO). The data manipulations are then discussed in extrapolation to simulation flight distance and flight simulation. One of the most important point of flight simulation is adjustments for differences between wind tunnel test conditions and flight test conditions. To simulated the noise level estimation procedure for noise data post-process, simulate procedures from data of the wind tunnel noise measurement and the flight noise measurement by using a 7kg degree UAV. This study confirmed an effectively noise estimation procedures by wind tunnel noise test and flight noise test.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.52-52
• /
• 2020

영상을 이용하여 하천유속과 유량을 측정하는 방법은 신속하고 간결하게 유속을 측정할 수 있는 방법으로 주목을 받고 있다. 또한 새로운 기술인 드론을 활용하여 하천의 유속과 유량을 측정하는 방법도 다양하게 시도되고 있다. 본 연구는 드론을 정지영상과 동영상을 이용하여 별도의 측량이나 복잡한 과정없이도 하천의 유속분포를 추정할 수 있는 방안을 제시하였다. 이 때, 중소하천의 유속 측정에 보다 쉽게 활용할 수 있도록 카메라 보정을 통한 카메라 내부변수 획득과 정지영상에 수록된 드론의 위치와 자세에 대한 EXIF 자료를 이용하는 방안, 약간의 흔들림이 있는 영상에서도 유속을 추정하는 방안을 제안하였다. 먼저, 드론의 카메라 보정을 위한 프로그램을 작성하고, 카메라의 내부 변수를 추정하였다. 드론의 위치와 자세에 대한 정보는 정지영상(JPG 파일)에 수록된 EXIF 정보를 이용하여 드론의 위치(GPS)와 자세(자이로스코프)를 알아내었다. 이를 이용하여 현장의 참조점에 대한 위치 정보를 확인하고, 또 수면촬영을 위한 정지비행시의 카메라의 대략의 위치와 자세 정보를 확인하였다. 이 자료들은 실제 유속측정에 이용하는 동영상에서 나타나는 참조점의 위치 정보를 결정하기 위한 것이다. 그리고 연이어 촬영된 동영상에서 시공간영상분석법으로 측정 단면의 유속분포를 분석하였다. 이 때, 동영상 내에 있는 약간의 흔들림은 FFT 분석으로 적절히 보완할 수 있다. 개발된 방법을 밀양강의 단장천 대리 수위표 지점 인근에서 시험한 결과 기존의 유속계로 측정한 방법과 상당히 근사한 결과를 얻을 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.31-39
• /
• 2013

A Quad Tilt Wing UAV is a new concept hybrid UAV having the advantages of both fixed-wing and rotary-wing aircraft. This paper presents longitudinal flight dynamic characteristics of a Quad Tilt Wing UAV. The designed Quad Tilt Wing UAV is a configuration of a tandem wing type aircraft with an actuating motor and propeller mounted at each wing. Momentum theory is used to calculate the thrust, and nonlinear modeling is performed considering lift and drag generated by slip stream effect of propellers. Also, Force and moment variation at each tilting angle is considered. Static trim on longitudinal axis is analyzed via numerical simulation. Componentwise force contribution was analyzed at each trim mode. Dynamic characteristics were evaluated through eigenvalue analysis for a linear model at each flight mode. It is verified that longitudinal dynamic characteristics are changing from unstable to stable state by continuous transition of dominant poles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.376-382
• /
• 2014

This paper presents a method to enable a UAV in autonomous flight along a desired path to follow it backwards when a strong headwind prevents the vehicle from proceeding forward. The main purpose of the reverse path following in this study is to return to a mission quickly when the wind becomes weaker. When the nonlinear path following guidance law is used, there are two reference points available in the path following. One of the two points is selected considering a flight direction for calculating a straight-line distance(L) from the vehicle to the point for the path following. An initial heading angle with respect to the wind direction determines whether the reverse path following is feasible or not at the time of the wind is generated. The result of the proposed method based on kinematic model in this study is verified through simulations implemented in Matlab.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.579-584
• /
• 2017

SBAS is a satellite based navigation correction system that provides correction information and integrity information of GNSS signal through geostationary satellite based on analysis of GNSS signal in ground station. KASS, a Korean SBAS, is aiming at the APV-1 class SoL service in 2022. Sufficient ground and flight tests must be performed in advance to provide SoL services. However, since KASS, the Korean SBAS, has not yet been added in Korea, specific detailed evaluation items are not presented. EGNOS, which is expected to be the most compatible with KASS and is being serviced after its development, has already been evaluated. In this paper, we analyze the regulations applied to EGNOS construction and analyze the criteria of ground and flight test evaluation items required for flight testing, which is expected to be referenced to the flight inspection process in the future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.359-367
• /
• 2018

The vortex ring state that occurs during the descending flight of a rotorcraft generates a circulating flow like a donut near the rotating surface, and it often causes a rotorcraft fall due to loss of thrust. In this paper, we have physically identified the flow field in the vortex ring state of the quadcopter, one of the types of unmanned aerial vehicles. The descending flight of the quadcopter was simulated in a 1m subsonic wind tunnel of the Korea Aerospace Research Institute(KARI) and the Particle Image Velocimetry(PIV) was used for the flow field measurement. The induced velocity in the hovering state is estimated by using the momentum theory and the test was carried out in the range of descent rate at which the vortex ring condition could be caused. The development and the direction of the vortex ring were confirmed by the measurement of the flow field according to not only the descent rate but also propeller separation distance. In addition, the results of the study show the vortex ring state can be predicted sufficiently by measuring the flow velocity around the quadcopter.