• Journal of Adhesion and Interface
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2011

Optimal dispersion and fabrication conditions of carbon nanotube (CNT) embedded in phenolic resin were determined by electrical resistance measurement; and interfacial property was investigated between plasma treated carbon fiber and CNT-phenolic composites by electro-micromechanical techniques. Wettability of carbon fiber was improved significantly after plasma treatment. Surface energies of carbon fiber and CNT-phenolic nanocomposites were measured using Wilhelmy plate technique. Since surface activation of carbon fiber, the advancing contact angle decreased from $65^{\circ}$ to $28^{\circ}$ after plasma treatment. It was consistent with static contact angle results of carbon fiber. Work of adhesion between plasma treated carbon fiber and CNT-phenolic nanocomposites was higher than that without modification. The interfacial shear strength (IFSS) and apparent modulus also increased with plasma treatment of carbon fiber.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.303-310
• /
• 2020

The purpose of this study was to verify the relationship between students' exercise ability beliefs, academic engagement and self-handicap in physical education class. To this end, this study selected a total of 437 copies of questionnaires as final valid samples using the convenience sampling method targeting middle school students at 4 schools in metropolitan area. For data processing, this study confirmed the goodness of fit test of the whole model using SPSS 20.0 and AMOS 20.0, and then did hypothesis testing; the study results are as follows: First, the increased belief of exercise ability beliefs was shown to have a static effect on the academic engagement, and a fixed belief did not have a significant effect on the academic engagement. Second, the increased belief was shown to have no significant effect on self-handicap, while the fixed belief had a static and significant effect on self-handicap. Third, the students' academic engagement has been confirmed to have a negative effect on self-handicap.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.3
• /
• pp.137-147
• /
• 1997

Interface shear strength of' concrete under static loading and deterioratiion of interface strength by fatigue loading in shear were experimentally investigated using composite beam test specimens. Thirteen beams were constructed. Five composite beams were tested statically until interface delaminations were observed in the static tests. Seven composite beam and one monolithically cast beam were subjected to two to three million cycles of fatigue load. Test variables were interface roughness, interface shear reinforcement, and presence of interface bond. The average interface shear strength of the composite beams with bonded-rough interface was 6, 060 kPa. No interface delamination was observed after cycling for the composite beams with bonded - rough interface and interface bond was not influenced by repeated application of the shear stress of 2.000 kPa(about 1/3 of the static interface shear strength). Smooth interface and unbonded-rough interface with shear reinforcement deteriorated under repeated shear loading.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.12
• /
• pp.907-917
• /
• 2006

In this paper, we propose a strategy to improve fault-tolerance and scalability of replicated services in mobile agent systems by applying an appropriate passive replication protocol for each replicated service according to whether the service is deterministic or non-deterministic. For this purpose, two passive replication protocols, PRPNS and PRPDS, are designed for non-deterministic and deterministic services respectively. They both allow visiting mobile agents to be forwarded to and execute their tasks on any node performing a service agent, not necessarily the primary agent. Especially, in the protocol PRPDS, after a backup service agent has received each mobile agent request and obtained its delivery sequence number from the primary service agent, the backup is responsible for processing the request and coordinating with the other replica service agents. Therefore, our strategy using the two proposed protocols can promise high scalability of replicated services a large number of mobile agents attempt to access in mobile agent systems. Our simulation results show that the proposed strategy performs much better than the one using only the traditional passive replication protocol.

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.303-309
• /
• 2019

The purpose of this study was to inquire into the structural relations between teacher-student interactions, outcome expectancy, academic engagement which are perceived in a physical education class. To this end, this study selected a total of 442 copies of questionnaires as final valid samples using the convenience sampling method targeting middle school students at 4 schools in metropolitan area. For data processing, this study confirmed the goodness of fit test of the whole model using SPSS 20.0 and AMOS 20.0, and then did hypothesis testing; the study results are as follows: First, proximity, one of subfactor of teacher-student interactions, had significant effects on outcome expectancy and academic engagement whereas influence had no significant effects on it. Second, students' outcome expectancy had significant impacts on their academic engagement. Third, outcome expectancy had mediating effects on relations between teacher-student interactions (proximity) and academic engagement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.75-86
• /
• 2019

The biggest obstacle in the nuclear power generation is the high level radioactive waste such as the spent nuclear fuel. High level radioactivities and generated heat make the safe treatment of the spent nuclear fuel very difficult. Nowadays, the only treatment method is a deep geological disposal technology. This paper treats the structural safe design problem of the spent nuclear fuel disposal canister which is one of the core technologies of the deep geological disposal technology. Especially, this paper executed the nonlinear structural analysis for the stresses and deformations occurring in the canister due to the impulsive force applied to the spent nuclear fuel disposal canister in the case of an accidental drop and ground impact event from the transportation vehicle in the repository. The main content of the analysis is about that the impulsive force is obtained using the commercial rigid body dynamic analysis computer code, RecurDyn, and the stress and deformation caused by this impulsive force are obtained using the commercial finite element static structural analysis computer code, NISA. The analysis results show that large stresses and deformations may occur in the canister, especially in the rid or the bottom of the canister, due to the impulsive force occurring during the collision impact period.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.204-212
• /
• 2004

Existing distributed systems have higher probability of failures occurrence than stand-alone system, so many fault tolerant techniques have been developed. Because of insufficient storage resulting from the increased fault tolerance information stored, the performance of system has been degraded. To avoid performance degradation, it needs delete useless fault tolerance information. In this paper, we propose a garbage collection algorithm for fault tolerance information. And we define and design the garbage collection agent for garbage collection of fault tolerance information, the information agent for management of fault tolerant data, and the facilitator agent for communication between agents. Also, we propose the garbage collection algorithm using the garbage collection agent. For rollback recovery, we use independent checkpointing protocol and sender based pessimistic message logging protocol. In our proposed garbage collection algorithm, the garbage collection, information, and facilitator agent is created with process, and the information agent constructs domain knowledge with its checkpoints and non-determistic events. And the garbage collection agent decides garbage collection time, and it deletes useless fault tolerance information in cooperation with the information and facilitator agent. For propriety of proposed garbage collection technique using agents, we compare domain knowledge of system that performs garbage collection after rollback recovery and domain knowledge of system that doesn't perform garbage collection.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.153-158
• /
• 2005

Titanium alloy has widely been used as material for automotive parts because it has high specific strength. It is also light and harmless to human body. But, we have little design data about the creep behaviors of the alloy. Therefore, in this study, creep tests under four constant stress conditions have been conducted with low different temperature conditions. A series of creep tests had been performed to get the basic design data and life prediction of titanium products and we have gotten the fallowing results. First, the stress exponents decrease as the test temperatures increased. Secondly, the creep activation energy gradually decrease as the stresses became bigger. Thirdly, the constant of Larson-Miller parameter on this alloy was estimated as about 7.5. And for the last, the fractographs at the creep rupture showed the ductile fracture due to the intergranullar rupture.

• Journal of Korea Foresty Energy
• /
• v.21 no.2
• /
• pp.25-33
• /
• 2002

One of the critical problems to preserve books and documents in libraries and archives is the deterioration. Some of previous results showed that the major cause of paper deterioration was the acid-catalyzed hydrolysis of the cellulose in paper fibres and aging rate of acidic paper was faster than that of alkaline paper. Therefore, It is necessary to remove the acid in the paper for reducing the rate of paper deterioration. It has been reported to extend the useful life of acidic paper by three to five times. Recently, It has been recognized the need for an effective method of deacidifying large quantities of books and document. However, in the previous many reports little attention was paid to the effect of paper additives. In this paper, We carried out experiment about the effect of additives on paper aging and the effect of deacidification by the gaseous ethanolamines (monoehtanolamine, diethanolamine, triehtanolamine). In result, it was found that the strength of aging was in the order of the alum＋rosin＞alum ＞AKD＞ control and the rate of deacidification was in the order of the monoethanolamine＞diethanolamine＞triethanolamine. The treatment with the gaseous ethanolamines caused decreasing of brightness and dropping of fold endurances. However, deacidification by combination treatment of the various gaseous ehtnaolamines prevented from decreasing of brightness and dropping of folding endurances.

• Journal of KIISE:Software and Applications
• /
• v.31 no.3
• /
• pp.293-307
• /
• 2004

We consider the problem of scheduling tasks of a precedence constrained task graph, where each task has its execution time and deadline, onto a set of identical processors in a way that simultaneously minimizes the number of processors required and the total tardiness of tasks. Most existing approaches tend to focus on the minimization of the total tardiness of tasks. In another methods, solutions to this problem are usually computed by combining the two objectives into a simple criterion to be optimized. In this paper, the minimization is carried out using a multiobjective genetic algorithm (GA) that independently considers both criteria by using a vector-valued cost function. We present various GA components that are well suited to the problem of task scheduling, such as a non-trivial encoding strategy. a domination-based selection operator, and a heuristic crossover operator We also provide three local improvement heuristics that facilitate the fast convergence of GA's. The experimental results showed that when compared to five methods used previously, such as list-scheduling algorithms and a specific genetic algorithm, the Performance of our algorithm was comparable or better for 178 out of 180 randomly generated task graphs.