• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.71-80
• /
• 1990

The fracture characteristics of concrete under various rates of loading are investigated. The static and dynamic fracture energies of concrete are determined and the size-dependency of fracture energy is clarified from the present study. To this end, a series of experiments were conducted. The maximum failure loads, fracture energies and nominal failure stresses were calculated from those test results. It is found that the fracture energies are increased with the increase of loading rate. The fracture energy values were also greatly influenced with the size of the specimen. The size-dependent prediction eguations for the static and dynamic fracture energies of concrete are proposed in the present study. The present paper provides useful data for the dynamic fracture analysis of concrete structures.

• Computational Structural Engineering
• /
• v.4 no.3
• /
• pp.79-88
• /
• 1991

The procedure of the elastic response spectrum method which is used in the codes of many countries involves the computation of a static horizontal substitute loading resulting from the earthquake. The substitute loading is divided by a behavioral factor in order to take energy dissipation due to the real nonlinear structural behavior and damping effects ect. into account. The behavioral factors widely used in many countries are based not on the exact calculation but only on the empirical data. In order to determine the behavioral factors analytically, it is necessary to define the limit state of structures as a first step. In this work, the methods of the determination of limit state for the steel structures are discussed in the geometric, serviceabile and material apsects, and the behavioral factors for the three types of structures are calculated.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.999-1000
• /
• 2011

영구자석을 삽입하는 IPM(Interior Permanent Magnet : 이하 IPM) 방식의 동기전동기 설계에서 브리지의 형상 결정은 기계적인 안정성을 확보하고 출력 요구사양을 만족시키기 위해 구조해석과 자기회로 해석을 병행하여 검토하는 것을 요구한다. 본 논문에서는 IPM타입 동기전동기를 대상으로 회전자 원심력이 정적상태로 인가되는 정하중 조건과 속도변화가 시간에 따라 변하는 동하중 조건일 경우를 구분하여 설계 여유를 분석하였으며, 영구자석의 접착여부에 따라 브리지에 발생하는 응력 분포의 차이를 해석하였다. 또한, 동하중 상태에서 재료의 응력-피로 특성을 통해 피로 한계 조건을 설계단계에서 예측하였다.

• Computational Structural Engineering
• /
• v.11 no.1
• /
• pp.58-69
• /
• 1998

본 기사에서는 진동을 유발하는 기계장치의 지지 형태에 따른 해석 모델링 기법을 소개하는데 중점을 두었다. 다양한 해석 모델등 중 어느 것을 사용할 것인가는 주어진 조건이나 정보, 요구되는 정확도, 효율성 등을 고려하여 설계 엔지니어가 판단하여야 한다. 또한 진동 하중을 받는 구조물에 대한 설계 및 해석을 하기 위해서는 기계장치에 대한 사양 및 요구사항, 지반의 물리적 성질, 외부 환경적 요인 등을 파악하여야 한다. 종합적인 판단하에 구조물을 모델링하여 얻어진 결과들을 가지고 실제 설계 요구 조건과 비교, 검토를 하여야 하며, 이러한 설계 조건들은 다음과 같은 사항들을 포함한다. 1) 지반이나 구조물의 파괴, 과도한 처짐 등에 대한 정적 강도를 검토한다. 2) 진동 응답에 대한 최대 변위, 최대 속도, 최대 가속도를 검토한다. 3) 최대 확대계수, 최대 동적하중 계수, 공명조건, 최대 전달계수 등을 포함한 동적 거동을 검토한다. 4) 실제 구조물에서 일어날 수 있는 모든 모드들에 대한 검토를 한다. 5) 기계, 구조물, 연결부 등에 대한 파괴 가능성을 고려한다. 6) 사람이나 기계장치의 작동 등에 대한 환경적 요구조건의 만족 여부를 검토한다.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.45-52
• /
• 2008

The present study has extended OpenSees, which is an open-source software framework DOS program for developing applications to idealize geotechnical and structural problems, for the static analysis of axial load capacity and settlement of single piles in MS Windows environment. The Windows version of OpenSees as improved by this study has enhanced the DOS version from a general purpose software program to a special purpose program for driven and bored pile analysis with additional features of pre-processing and post-processing and a user friendly graphical interface. The method used in the load capacity analysis is the numerical methods based on load transfer functions combined with finite elements. The use of empirical nonlinear T-z and Q-z load transfer curves to model soil-pile interaction in skin friction and end bearing, respectively, has been shown to capture the nonlinear soil-pile response under settlement due to load. Validation studies have shown the static load capacity and settlement predictions implemented in this study are in fair agreement with reference data from the static loading tests.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.1
• /
• pp.15-22
• /
• 2011

In this research, static load test is performed to verify the arch effect and structural performance of CFTA(Concrete-Filled and Tied steel tubular Arch) girder, and FE(Finite Element) analysis is performed to investigate validity of the test result. CFTA girder is designed to maximize the benefit of each material, such as steel plate, filled concrete and PS tendon. Static load test is performed based on the frame-analysis result of 12m sample miniature model. The result of static load test is that structural performance and safety of CFTA girder are confirmed and there is different deflection mode with other structural form result from arch effect. FE analysis with ABAQUS is also performed to show the validity of the truck collision safety and static load test.

• Computational Structural Engineering
• /
• v.4 no.1
• /
• pp.42-43
• /
• 1991

균열성암반의 모형화 기술은 계속적으로 보완발전되어 UDEC이 개발되었으며, 현재 UDEC의 최신판은 블록 내부를 다시 유한차분요소로 분할하여 블록의 소성거동(Mohr-Coulomb Model) 및 쪼개짐을 고려할 수 있고, 절리면에서의 유체흐름 및 유압의 발생, 그리고 열응력 해석 등 평면변형 문제의 정적해석과 지진 및 폭발하중을 고려한 동적해석이 가능하다. UDEC은 전처리 기능이 뛰어나 최소한의 입력데이타로써 전체 모형의 데이타를 자동생성시키며 절리면의 통계학적 자동생성 및 터널형상의 자동생성도 가능하다. UDEC은 실용적인 보강요소를 구비하여 Rock Bolt 뿐만 아니라 그라우트를 고려한 Cable Bolt를 모형화할 수 있으며 국부적인(Key Block)보강으로써 불연속체 전체의 안정을 검토할 수 있다.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.563-572
• /
• 2010

This study evaluates the load-carrying capacity of a thermal prestressed steel beam with an eccentric bracket. The steel beam that is proposed in this study has an eccentrically installed cover plate through application of the eccentric bracket. The eccentric bracket helps the steel beam achieve greater sectional stiffness and more efficiently induces prestress. A material non-linear characteristic applied finite element analysis was also conducted to check the validity of the experiments. The results of this study showed that the structural stiffness, yield load, and ultimate strength of the TPSM-applied steel beam with the eccentric bracket increased due to the eccentricity of the cover plate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.533-538
• /
• 2006

This study deals with the static and dynamic stability analyses of simple tapered columns with constant volume. The crosssections of column taper are the regular polygons whose depths are varied with the parabolic functional fashion. The hingedhinged end constraint is chosen as the boundary condition of the column. The non-dimensional ordinary differential equation governing free vibrations of such column subjected to an axial load is derived and solved numerically. From numerical results, the relationships between natural frequencies and section ratios are obtained, from which the configurations of dynamic optimal shapes of columns and the strongest columns are extracted.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.59-64
• /
• 2001

The purpose of this work is to investigate the static strength, the stress distribution, and the failure process of quasi-isotropic composite laminates made of two different matrices when loading directions are changed. We carried out static tests of $[0/-60/+60]_s$ and $[+30/-30/90]_s$ laminates. Two types of matrices used are AS4/epoxy and AS4/PEEK. The damage mechanisms of the quasi-isotropic laminate, $[0/-60/+60]_s$, strongly depend on the load direction applied to the laminate.