• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.579-584
• /
• 2008

A novel nondestructive testing (NDT) system, which is able to detect a crack with high speed and high spatial resolution, is urgently required for inspecting small cracks on express train wheels. This paper proposes an improved signal processing circuits, which uses the multiple amplifying circuits and the crack indicating pulse output system of the previous scan-type magnetic camera. Hall sensors are arrayed linearly, and the wheel is rotated with static speed in the vertical direction to sensor array direction. Each Hall voltages are amplified, converted and immediately operated by using, amplifying circuits, analog-to-digital converters and $\mu$-processor, respectively. The operated results, ${\partial}V_H/{\partial}t$, are compared with a standard value, which indicates a crack existence. If the ${\partial}V_H/{\partial}t$ is larger than standard value, the pulse signal is output, and indicates the existence of crack. The effectiveness of the novel method was verified by examine using cracks on the wheel specimen model.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.82-90
• /
• 2000

An experimental study has been carried out at circulating water channel to investigate the non-breaking and breaking waves generated by a submerged circular cylinder steadily moving under the free surface. Free surface profiles and pressure distributions on cylinder surface were measured at various submerged depths of cylinder. They were complemented by the measurements of velocities, head losses and turbulence intensities in the wakes of body and "breaker". Part 1 of this three-part paper describes the experimental arrangement and the patterns of wave profile and pressure distribution at various depths of submergence. These databank contributions are of special interest in traditional ship hydrodynamics. In Part 2, special focuses are made to elucidate the viscous and turbulent aspects of flow field. Finally Part 3 will deal with the visualization of instantaneous vortical flow to study the mutual interaction between vorticies shedded from the free-surface and the cylinder using a Particle Image Velocimetry.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.38-43
• /
• 2002

A study on the test, design and fabrication of wind tunnel model for measurement of air load distribution on wing surfaces is presented. 447 pressure taps are installed normal to the wing surfaces, and measured by PSI-8400 system using total 8 ESPs modules installed in the model. The test was performed at 50 m/sec constant speed in the low speed wind tunnel of Agency for Defense Development. Tests were carried out to determine effects of angle of attack, angle of sideslip and flap and stores for the load distribution of wing. The test results in this paper can be applied to the design optimization of structure and validation of computational fluid dynamics.

• Korean Journal of Food Science and Technology
• /
• v.25 no.2
• /
• pp.178-184
• /
• 1993

The procedure using equivalent time at reference temperature has been assessed for the estimation of kinetic parameters with experimental data. Kinetic studies of nonenzymatic browning reaction in model and food system were carried out with linearly increasing temperature method. These kinetic parameters, n, $k_{ref}$ and $E_a$ of the systems were evaluated from original data in one step by nonlinear least square regression. The one step procedure yielded efficiently accurate parameter estimation. Computer simulated data with the kinetic models were well consistent with experimental data (average correlation coefficient=0.96).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.475-478
• /
• 2004

In this paper, a magnet-type automatic pipe cutting machine that binds itself to the surface of the pipe using magnetic force and executes unmanned cutting process is proposed. During pipe cutting process when the machine moves around the pipe laid vertical to the gravitational field, the gravity acting on the pipe cutting machine widely varies as the position of the machine varies. That is, with same driving force from the driving motor the cutting machine moves faster when it climbs down the surface of the pipe and moves slower when it climbs up to the top of the pipe. To maintain a constant velocity of the pipe cutting machine and improve the cutting quality, the authors adopted a conventional PID controller with a feedforward effort designed based on the encoder measurement of the driving motor. It is, however, impossible for the encoder at the motor to measure the absolute position and consequently the absolute velocity of the cutting machine in the case where the slip between the surface of the pipe and wheel of the cutting machine is not negligible. As an attempt to obtain a better estimation of the absolution angular position/velocity of the machine the authors proposes the use of the MEMS-type accelerometer which can measure static acceleration as well as dynamic acceleration. The estimated angular velocity of the cutting machine using the MEMS-type accelerometer measurement is experimentally obtained and it indicates the significant slipping of the machine during the cutting process.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.234-247
• /
• 2016

As the necessity of the evaluation of environmentally-friendly traffic operations strategies becomes obvious, the characteristics of fuel consumption models should be comprehended in advance. This study selected three fuel consumption models developed in Korea and another three models widely used in North America, and compared their applicabilities. Specifically, the national institute of environmental research (NIER) drive modes and the VISSIM software were utilized to model various driving patterns, and their fuel consumptions were estimated using the fuel consumption models. Based on the results, all the models showed the similar results in the analysis of the most fuel efficient cruising speed. On the other hand, caution should be taken when using the KR-1 and KR-2 models in microscopic analyses because they are not sensitive to instantaneous power requirements of vehicles.

• Journal of Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.46-55
• /
• 2005

In this paper, we realize the panoramic infrared warning system to detect the small threaten object and propose the infrared image enhancement method to improve the warning ability of this system. This system composes of the sense head unit, the signal processing unit, and so on. In the proposed system, the sense head unit acquires the panoramic IR image with 360 degree field of view(FOV) by rotating the thermal sensor. The signal processing unit divides panoramic image into four sub-images with 90 degree FOV and computes the adaptive plateau value by using statistical characteristics of each subimage. Then the histogram equalization is performed for each subimage by using the adaptive plateau value. We realize the signal Processing unit by using the DSP and FPGA to perform the proposed method in real time. Experimental results show that the proposed method has better discrimination and lower false alarm rate than the conventional methods in this warning system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6830-6837
• /
• 2014

Since the advent of global warming and energy depletion, there has been great interest in eco-driving (energy-efficient driving). In this paper, a system is proposed to monitor the idle running of an engine and steady driving for a vehicle equipped with an ISG (Idling Stop & Go system). The system consists of a G/W device to acquire the vehicle operation data, a smartphone app for monitoring eco-driving and a server system. The main contribution of this paper is that it defines the integrated functions, the architecture and operation mechanisms of a system for monitoring eco-driving including the prohibition of running idle. The system enables the users to check the idling stop times, driving speeds, fuel savings, and $CO_2$ emissions, resulting in the driving style for eco-driving. The server system, which is a part of this system, provides OpenAPI-style web services for the storage and retrieval of car operation data, which facilitates the development of applications.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.145-150
• /
• 2018

In the machine tool spindle, various tasks ranging from roughing to finishing must be possible, and the functions of constant speed movement or rotation positioning must be performed. Therefore, there are many variables to be considered in the spindle design. The Swiss Turn Type spindle automatic lathe is a good machine tool for working pins with thinner shafts than a fixed automatic lathe. The Swiss Turn Type spindle is mainly used for precision machining of small products, so the machining precision should be high. The maximum outer diameter limit shall be Ø32 and the inner diameter limit shall be Ø6. In this study, the static and dynamic characteristics of the SCM440 material used in the spindle type automatic lathe were analyzed by applying it to the Swiss turn type spindle automatic lathe. Numerical analysis was used to obtain optimal design technique with high speed and high accuracy considering the factors affecting the static and dynamic characteristics of the spindle.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.508-514
• /
• 2010

The objective of this work presented here was experimental study of steadystate and cold start exhaust nano-sized particle characteristics from common rail diesel engine. The effect of the diesel oxidation catalyst (DOC) on the particle number reduction was insignificant, however, particle number concentration levels were reduced by 3 orders of magnitude into the downstream of diesel particulate filter (DPF). In high speed and load conditions, natural regeneration of trapped particle occurred inside DPF and it was referable to increase particle number concentration. As fuel injection timing was shifted BTDC $6^{\circ}CA$ to ATDC $4^{\circ}CA$, particle number concentration level was slightly reduced, however particle number and size was increased at ATDC $9^{\circ}CA$. Nucleation type particle reduced and accumulation type particle was increased on EGR condition.