• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.393-398
• /
• 2007

본 논문은 작업 현장에서 청각장애인의 의사소통을 보조하는 한국 수화 메시지 보드의 개발에 대하여 다룬다. 청각 장애인은 일상적인 직업 현장에서 의사소통이 자유롭지 못하여 업무에 잘 적응하지 못하고 사내의 인간관계에 많은 어려움을 겪고 있다. 문자를 이용한 정보 전달을 통해 모든 의사소통을 대체할 수 있을 것이라는 일반적인 생각과는 달리, 청각장애인의 경우 비장애인과 비교하여 사물의 개념 습득에 어려움이 있을 수 있으며 마찬가지로 사용하는 어휘수도 제한적인 경우가 많아 문자를 통한 의사소통에는 명확한 한계가 존재한다. 실제로 청각 장애 근로자가 이직하는 사유로 의사소통이나 인간관계가 높은 비중을 차지한다. 수화 메시지 보드는 크게 사내 네트워크를 이용한 공지 사항 전달을 위한 용도와 복수 개의 메시지 보드 간 문자 송수신의 용도로 사용 가능하다. 비장애인이 청각장애인에게 문자 입력으로 의사를 전달하면, 전달된 문자는 문자-수화 번역기를 통해 자동으로 수화로 번역되어 아바타의 수화 동작으로 화면에 출력된다. 전체 시스템은 수화 아바타를 포함한 그래픽 유저 인터페이스 (GUI), 수화 데이터베이스 및 한글 형태소/문장 분석기를 포함하는 문자-수화 번역기, 그리고 TCP/IP 기반의 문자 전송기의 세 부분으로 나뉜다. 본 논문에서는 수화 데이터베이스의 단어 선정을 위한 대상 작업 현장을 청각 장애 근로자가 타 직업에 비해 많은 비중을 차지하는 전자 부품 조립 업체로 한정하였다. 수화 데이터베이스는 자음 14종, 모음 17종, 숫자 15종, 일상생활 용어 1000종, 전자 부품 조립 업체에 특화된 단어 50종 및 직업 교육 관련 용어 50종으로 이루어진 총 1146종의 수화 단어를 포함하며, 수화 데이터베이스에 등록되지 않은 단어에 대해서는 지화로 표현하도록 한다. 이 중 전자 부품 조립 업체 특화 단어와 관련하여서는, 현재 동일한 분야의 작업 현장이라 하더라도 각 사업장 간 사용되는 수화가 통일되지 않아 문헌 조사 및 현장 조사를 통해 사용 빈도가 높고 형태가 공통적인 50종을 추려내었다. 본 연구는 실제 업무현장에서 청각장애인이 겪는 의사소통의 문제를 효과적으로 해결함으로써, 청각장애인이 직업 현장에 보다 쉽게 적응하도록 도움을 줄 뿐만 아니라, 일을 통해 자아 실현을 하도록 돕는 방안이 될 수 있다는 점에서 중요한 의의를 갖는다.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.483-490
• /
• 2021

In order to learn an existing song and create a new song using an artificial neural network, it is necessary to convert the song into numerical data that the neural network can recognize as a preprocessing process, and one-hot encoding has been used until now. In this paper, we proposed a note embedding method using notes as a basic unit and a bar embedding method that uses the bar as the basic unit, and compared the performance with the existing one-hot encoding. The performance comparison was conducted based on quantitative evaluation to determine which method produced a song more similar to the song composed by the composer, and quantitative evaluation methods used in the field of natural language processing were used as the evaluation method. As a result of the evaluation, the song created with bar embedding was the best, followed by note embedding. This is significant in that the note embedding and bar embedding proposed in this paper create a song that is more similar to the song composed by the composer than the existing one-hot encoding.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.950-955
• /
• 2023

Cell division is an essential process for the survival and development of living organisms. It is critical that duplicated chromosomes are properly segregated into daughter cells during mitosis. The centrosome is the core organelle that forms the microtubule-organizing center (MTOC), which generates the microtubules that make up the mitotic spindle during cell division. The centrosome is also involved in cell signaling and motility. In normal cells, there is one centrosome in G1 that replicates into two in the S phase and matures through G2. During the M phase, duplicated centrosomes move to both ends of the cell, and spindle microtubules that are generated from MTOC move the chromosome to both ends. The cells then split into two to complete the cell division. However, a phenomenon called centrosome amplification (CA), in which the number of centrosomes is higher than normal, is common in cancer cells and can lead to chromosome instability (CIN). This paper discusses the process of centrosome replication and the role of PLK4 in this process. The possible consequences of centrosome amplification and how the PLK4 inhibitor may be able to treat certain types of cancer cells, such as breast cancer and neuroblastoma, will also be discussed.

• Journal of The Korean Association For Science Education
• /
• v.27 no.5
• /
• pp.421-431
• /
• 2007

The purpose of this study was to examine the characteristics of observation and measurement inquiry process in the Korean science textbooks. For the inquiry process of observation, the higher grade textbooks contained more 'comparative observation' rather than 'simple observation'. Students should express their observation results in written words rather than verbal descriptions in the higher grade. For the inquiry process of measurement, the temperature measurement was the most frequent measurement activity. 'Measurement design' was found more frequently in the lower grade textbooks. The uses of measurement tools were not presented systematically and were presented restrictively when the relevant experiment wanted to use these tools. The higher grade textbooks include 'quantitative measurements' rather than 'qualitative measurements' and 'operation measurement' rather than 'simple measurement'. In the application of measurement results, we had difficulty in finding the activities related with the usage of unit, unit conversion, significant figure, error and uncertainty.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.909-914
• /
• 2024

This study suggests a quantitative evaluation of transfer learning, which is widely used in various AI fields, including image recognition for robot vision. Quantitative and qualitative analyses of results applying transfer learning are presented, but transfer learning itself is not discussed. Therefore, this study proposes a quantitative evaluation of transfer learning itself based on MNIST, a handwritten digit database. For the reference network, the change in recognition accuracy according to the depth of the transfer learning frozen layer and the ratio of transfer learning data and pre-training data is tracked. It is observed that when freezing up to the first layer and the ratio of transfer learning data is more than 3%, the recognition accuracy of more than 90% can be stably maintained. The transfer learning quantitative evaluation method of this study can be used to implement transfer learning optimized according to the network structure and type of data in the future, and will expand the scope of the use of robot vision and image analysis AI in various environments.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.990-995
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with ethylene diamine(EDA) and hexamethylene diamine(HMDA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure or chain length of curing agents. In contrast, the results show that the DGEBA/EDA system having the two carbons had higher values in the thermal stability, maximum conversion of epoxide, density, glass transition temperature, tensile modulus, flexural strength, and flexural modulus than the DGEBA/HMDA system having the six carbons, whereas the DGEBA/EDA cure system had relatively low values in the shrinkage(%), thermal expansion coefficient, tensile strength, and had similar values in the maximum exothermic temperature, and conversion of epoxide compared to the DGEBA/HMDA cure system. This findings indicate that packing ability in the HMDA structure affects the thermal and mechanical properties.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.175-185
• /
• 2017

As the gas is manufactured, handled and used more often due to the continuous increase of gas, the related facility gets expanded and more complex causing small and big accident which causes economic loss including damage for humans and materials. The gas pipeline, the most common gas facility, has the biggest risk of accidents. Especially in the urban area and densely populated areas, the accident due to the high pressure pipeline may cause even more serious damages. To prevent the accident caused by the buried pipeline, it is required for the relevant authorities to evaluate the damage and risk of the whole pipeline system effectively. A risk is usually defined as a possibility or probability of an undesired event happening, and there is always a risk even when the probability of failure is set low once the pipeline is installed or under operation. It is reported that the accident caused by the failure of the pipeline rarely happens, however, it is important to minimize the rate of accidents by analyzing the reason of failure as it could cause a huge damage of humans and property. Therefore, the paper rated the risk of pipelines with quantitative numbers using the qualitative risk analysis method of the Scoring Model. It is assumed that the result could be effectively used for practical maintenance and management of pipelines securing the safety of the pipes.

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.213-233
• /
• 2013

The aim of this paper is to reveal the ethical problem of insider trading. 'Insider trading' refer to obtaining information from non-public sources such as private acquaintances about trade secret, using it purposes of enhancing insider's financial advantages. And sometimes such a practice can be conducted fraudulently. Therefore, the focus of this paper will be on fairness or justice arguments against insider trading. And all kinds of discussion this paper are to focus the underlying consideration behind these arguments, that is, the underlying consideration about violation of ethical standards of fairness. First, one of these arguments argues that insider trading does necessarily involve defrauding general investors such as general employees, general stockholders. And economic power and unjust advantage of insider can be exercised to the detriment of this non-insider's interests. Second, another argument argues that insider trading undermines competition which is the principle of any free market. And insider trading is not only a complication in the free market mechanism, but also thwarts free competition which free markets depend. Third, the final argument argues that insider trading will be made something unfair about the concept of equal access to information. This argument argues, therefore, that to permit insider trading would be to set up stock market trading rules that are unfair to non-insiders.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.996-1002
• /
• 2010

Flow cytometry (FCM) was used to measure the ploidy level of three different sports from 'Campbell Early' ($Vitis$ $labruscana$) grape. Results of the study showed different ploidy levels. FCM analysis for 'Campbell Early' grape which contains 2C DNA diploid cells showed single peak around 35-40 while 'Kyoho' grape with 4C DNA tetraploid cells had a different level of 70-80. However, analysis of the sports displayed a histogram with 2 peaks containing both 2C and 4C nuclei. There was no difference in histograms of 2C DNA flesh and pericarp; on the other hand, 4C DNA flesh type of sports had a different histogram from that of the 2C DNA pericarp. Chromosome numbers of diploid ('Campbell Early'), tetraploid ('Kyoho'), and three sports were counted under the microscope. 'Campbell Early' and 'Kyoho' have 38 and 76 chromosomes, respectively. Three different sports are mixoploids with mixtures of diploid and tetraploid cells. Microscopic observations of shoot apical meristems in sports from 'Campbell Early' grape were carried out to determine the type of plant chimera. 'Campbell Early' grape (diploid) and 'Kyoho' grape (tetraploid) showed that both had 2 tunica layers covering corpus cells, while the three different sports had tunica layers showing mostly oblique division. Most cells from 'Kyoho' grape were larger than 'Campbell Early' grape. Cells from L-2 and L-3 layers of the three sports were similar to 'Kyoho' grape in size, although all cells in L-1 surface layer were uniform in size like 'Campbell Early' grape. Results of FCM analysis indicated that both normal and polyploid cells could be intermixed in sports and could become mixoploidy consisting of diploid and tetraploid. All sports used in the tests were periclinal chimera plants with two distinct L-1 and L-2 cell layers. The result of this study suggests that all three sports which originated from 'Campbell Early' grape might be 2-4-4 type chimera formation.

• Korean Journal of Organic Agriculture
• /
• v.27 no.4
• /
• pp.437-452
• /
• 2019

The HACCP evaluation standards for the meat packaging plant are divided into general scale HACCP evaluation standard and small scale HACCP evaluation standard. There are 69 evaluation items in the general scale HACCP evaluation criteria, of which 54 items in the prerequisite management and 15 items in the HACCP management are included. The number of small scale HACCP evaluation items are 20 and about 29% of the general scale HACCP evaluation items. This may not be enough to produce a safety livestock products for the purpose of implementing the HACCP system due to the nature of the meat packaging plant, which does not show much difference in the production process or method of product depending on the scale. To improve the small scale HACCP evaluation standard, the importance of each item was compared with the small scale HACCP evaluation based on the rate of non-compliance and the severity levels in the general scale HACCP evaluation items. As a result of the study, 8 items were derived from the prerequisites management, 2 items were derived from the HACCP management, and some similar evaluation items were grouped together. Finally, 10 items were added to the 20 items of the existing small scale HACCP evaluation items. In this study, study on the safety management of domestic livestock products are continuously carried out, so that it is possible to provide safety livestock products to consumers and contributes to securing competitiveness of domestic livestock industry.