• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.46-47
• /
• 2002

최근 액정을 주입한 속이 빈 광섬유(Hollow fiber)와 주기적인 전극을 이용하여 전기적으로 제어 가능한 장주기 격자에 대해서 보고된 바 있다. 액정의 중요한 특성 중의 하나는 그 광축이 외부의 전기장에 의해 동적으로 재배열된다는 점이다. 또한 액정은 광축에 따라 굴절률이 다른 비등방성 물질이기 때문에 광축의 배열에 따라, 그리고 입사하는 빛의 편광에 따라 그 빛이 느끼는 굴절률이 달라지게 된다. 본 논문에서는 입사하는 빛의 편광에 따른 액정 장주기 광섬유 격자의 특성에 대해 연구하였다. 주기적인 전극의 길이는 3 cm이고 주기는 500 ${\mu}m$ 이다. 액정을 주입한 속이 빈 광섬유의 길이는 15 mm 이다. 입사하는 빛이 이상(extraordinary) 편광 상태일 때 약 6 dB 의 투과 손실을 나타냈으며 그 대역폭은 약 15 nm 이었다. 이 때 외부에서 인가한 전압은 150 V 였다. 입사하는 빛이 정상(ordinary) 편광 상태일 때에는 액정의 유효 굴절률이 외부 전기장에 대해 변하지 않기 때문에 장주기 투과 특성을 얻을 수 없었다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.15-20
• /
• 2007

최근 항만 물류 및 자산 관리 분야에서 실시간 위치 정보를 처리하는 RTLS(Real Time Locating System)시스템이 도입되고 있다. 이러한 시스템에서 RTLS 서버는 태그를 부착한 이동 객체들의 위치 데이터 스트림을 일정 시간 동안 수집하여 애플리케이션으로 전달한다. 이 때 위치 정보는 전파 굴절 현상으로 인해 오차가 발생하며, 이동 객체에 부착된 태그는 수 초 마다 위치 정보를 보고하기 때문에 시스템의 과부하를 초래하게 된다. 본 논문에서는 표준과의 호환성을 고려하고, 요구사항을 반영한 위치 데이터 스트림 처리기를 설계 및 개발하였다. RTLS 시스템의 전파 굴절 현상으로 야기되는 비정상적인 위치 오차를 보정하기 위해 맵 매칭 기법을 도입하여 위치 데이터 스트림의 신뢰성을 제공하며, 위치 변화가 없는 객체의 위치 데이터 스트림을 빠르게 정제하는 정지 상태 제거 필터를 개발하여 질의 처리 시 부하를 줄인다. 또한 각 애플리케이션의 질의 결과에 무의미한 위치 정보를 배제하는 중요 위치 수집기를 개발하여 시스템 성능을 향상시킨다.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.452-453
• /
• 2008

전 차륜 조향 굴절차량의 자동안내제어를 위한 기준경로와의 편차 되먹임 방식은 곡선경로에서 발생하는 정상상태 오차를 줄이기 어렵다. 본 논문은 이 차량의 자동안내제어의 성능향상을 위한 전향보상기 설계에 대해 기술한다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.22-23
• /
• 2001

광결정(Photonic crystals)은 유전체를 주기적으로 배치한 구조인데, 이런 구조에 의해 1차원, 2차원, 또는 3차원적으로 빛을 제어할 수 있다. [1] 이런 주기적인 구조로 인해 광결정 내에서는 특정에너지와 특정 방향을 가진 빛이 진행하지 못하는 광밴드 갭(photonic band gap)뿐만 아니라 밴드구조와 밀접한 관계가 있는 비정상적인 광분산이 나타나기도 한다. 이러한 비정상적인 광분산에는 입사빔의 미세한 파장변화에 따른 PC내에서의 급격한 빛의 꺾임이나, 단일 파장의 입사빔이 두갈래로 갈라지는 현상, 또는 negative나 1보다 작은 굴절효과 등이 있는데, 이러한 현상을 해석하기 위한 것으로 광결정내의 고정된 진동수에 해당하는 점들을 2차원 k공간에서 표시한 분산곡선(dispersion surface)이 도입되었다. [2] (중략)

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.157-164
• /
• 2003

Introduction of wave model, considered the effect of tide, wind and wave induced currents at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster protection problems. As the steady state spectral wave model could simulate depth induced wave shoaling and refraction, current induced refraction effect, steepness induced wave breaking, diffraction, wind wave growth, and wave-wave interaction that redistribute energy, this would support and compensate the gap in the real field of design where other wave models could not deal and cause wrong estimation. In this study, for that sense, we applied the spectral wave model t the large coastal waters near Gaduck Island where the Busan new port construction project is going on, for better understanding and analysis of wave transformation process. We also compared the simulation results with the calculated from the existing model. From such a trial of this study, we hope that broader and sager use of the spectral model in the area of port design and disaster prevention system come through in near future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3406-3411
• /
• 2010

Assessment of the accommodative response is an essential part of the optometric examination. This study measured objectively the accommodation responses those were measured by Autorefractor, MEM retinoscopy and Nott dynamic retinoscopy, and investigate the correlation and difference the results. Twenty-seven college students with normal visual acuity aged 19 to 29 years (mean $22.7{\pm}2.43$ years) participated in this study. Their accommodative responses to accommodative demand of 4D (25cm) were measured with Shin-Nippon NVision-K 5001 Autorefractor, MEM retinoscopy and Nott dynamic retinoscopy. The accommodative responses to accommodative demand of 4D were $3.70{\pm}0.25D$ by Shin-Nippon NVision-K 5001 Autorefractor, $3.58{\pm}0.30D$ by MEM retinoscopy and $3.77{\pm}0.29D$ by Nott dynamic retinoscopy, respectively. There were high correlations among the three techniques (p<0.05). MEM retinoscopy was measured $0.19{\pm}0.13D$ lower than Nott dynamic retinoscopy (p<0.05) and it was measured $0.12{\pm}0.24D$ lower than Shin-Nippon NVision-K 5001 Autorefractor (p<0.05). There was no significant difference between Nott dynamic retinoscopy and Shin-Nippon NVision-K 5001 Autorefractor (p>0.05). MEM retinoscopy showed lesser accommodative responses than Nott dynamic retinoscopy and Shin-Nippon NVision-K 5001 Autorefractor. Author suggest that Nott dynamic retinoscopy may use Shin-Nippon NVision-K 5001 Autorefractor interchangeably to evaluate accommodative responses expect MEM retinoscopy.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.265-272
• /
• 2011

Purpose: The clinical usefulness of rotation evaluation using objective refraction in toric soft lenses fitting was investigated. Methods: Toric soft lenses were fitted for 32 subjects (64 eyes; mean age of 24.69 ${\pm}$ 1.65 years) with astigmatism and both eyes of each subject were fitted with toric soft lenses. Objective refraction-based lenses rotation was evaluated from refraction and over-refraction data by indirect calculating technique. These calculated data were compared with the measured data from slit lamp with direct measuring technique. Results: Orientation of toric soft lenses around zero position (within ${\pm}$ 5$^{\circ}$ vertical line) was investigated. The orientations to the direction of nose of measured and calculated values were 69.78% and 63.64%, respectively, which showed similar values between two techniques. Agreement frequency between measured and calculated values in the magnitude of lenses rotation 54.69% and 82.82% for 10$^{\circ}$ and 20$^{\circ}$ of vertical line, respectively. The 95% limits of agreement between calculation and measurement were from -10.08$^{\circ}$ to 12.65$^{\circ}$, and mean difference was 1.29$^{\circ}$ within ${\pm}$ 10$^{\circ}$. The result showed there was no significant difference (p = 0.1984) and high correlation (r = 0.56, p = 0.0004) between two techniques. But the 95% limits of agreement was widen in ${\pm}$ 20$^{\circ}$ of vertical line. The magnitude of lens rotation between two methods was 9.66 ${\pm}$ 6.16$^{\circ}$, 16.17 ${\pm}$ 12.38$^{\circ}$ and 10.58 ${\pm}$ 12.02$^{\circ}$ for normal, loose and tight fitted conditions. Conclusions: From the results with smaller difference between two techniques, it was found that higher availability of subjective over-refraction data can be used as a supplementary tool for subjective refraction. An application using objective refraction with direct measuring could be provide high success in prescription on toric soft lenses.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.261-270
• /
• 2014

Purpose: To study the effect of an artificially induced dioptric blur on acuity and contrast sensitivity using the $Optec^{(R)}$ 6500. Methods: Healthy 31 subjects aged $22.90{\pm}1.92$ (male 16, female 15) who were recruited from university students with 6/6 (20/20) or better corrected visual acuity and normal binocularity. They were measured objective and subjective refraction for full correction and dioptric blur using 0.00 ~ +3.00 D (+0.50 D steps) trial lenses and trial frame. They were measured binocularly visual acuity and contrast sensitivity with the $Optec^{(R)}$ 6500 (Stereo Optical Co., Inc., Chicago, Illinois, USA) under day conditions (photopic condition, $85cd/m^2$). Results: The higher dioptric blur, the less distance visual acuity and decrease rate of visual acuity. The higher dioptric blur, the less contrast sensitivity at all frequencies, and the peak of contrast sensitivity was shifted from middle frequency (6 cpd) to low frequency (1.5 cpd). When the visual acuity was best visual acuity to 0.77, there was the peak point at 6 cpd which was normal contrast sensitivity peak point. Conclusions: If the low refractive error is uncorrected or the refractive error is inappropriate, the contrast sensitivity is decreased and the peak point of contrast sensitivity frequency is shifted abnormally though small uncorrected refractive error. So it will be considered that regular eye test and decision of refractive error correction is important.

• Electronics and Telecommunications Trends
• /
• v.9 no.1
• /
• pp.65-74
• /
• 1994

광 통신 분야에 응용되는 GRIN 렌즈의 사양을 통해서 고분자 GRIN 렌즈의 응용 가능성과 장점 등을 살펴보기 위하여 GRIN 렌즈의 특성과 GRIN 렌즈의 광통신 분야에의 응용성, 고분자 GRIN 렌즈 제작방법 등을 검토하였다. 이로부터 고분자 GRIN 렌즈는 제작 방법과 제작 공정 변수의 다양성으로 인하여 다양한 형태의 GRIN렌즈 제작과 굴절률 분포 제어에 있어서 장점이 있음을 확인하였다. 특히, 구형 고분자 GRIN 렌즈는 수 구경이 크고 수차가 적을 뿐만 아니라 제작 방법이 간단하기 때문에 광원과 광섬유간의 접속에 매우 유용할 것으로 판단되었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.2
• /
• pp.108-114
• /
• 2006

Transient and asymmetric density distributions of butane flow have been investigated from laser image signals by developed three-dimensional digital speckle tomography. Moved signals of speckles have been captured by multiple CCD images in three angles of view simultaneously because the flows were asymmetric and transient. The signals of speckle movements between no flow and downward butane flow from a circular half opening have been calculated by a cross-correlation tracking method so that those distances can be transferred to deflection angles of laser rays fur density gradients. The three-dimensional density fields have been reconstructed from the fringe shift signal which is integrated from the deflection angle by a real-time multiplicative algebraic reconstruction technique (MART).