• Journal of Korea Technology Innovation Society
• /
• v.12 no.3
• /
• pp.545-563
• /
• 2009

In an era of global competition, international cooperation in science and technology plays a key role in determining a nation's competitiveness. In fact, without international cooperation, it is almost impossible to keep in touch with the fast-changing technology. In regard to this, the Korean government put much efforts into building a strong base for global R&D networking. As a result, the environment for international cooperation has improved a lot. However, the outputs of international cooperation are still poor and fall short of expectations. With the importance of international cooperation in science and technology rising more and more, it is meaningful to examine the current situation of international cooperation in S&T and analyse the outputs of the cooperation activities to review our past and present international cooperation activities. Therefore, this paper focuses on analyzing the outputs of the MEST's international S&T cooperation programs in various ways and recommends ways to improve the outputs of the international cooperation in science and technology.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.128-132
• /
• 2012

물은 생물의 생존을 위해 필수적인 요소로 인류가 시작된 이래로 물을 효율적으로 이용하고 안전하게 관리하기 위한 노력은 계속되어 왔다. 최근 지구 온난화가 주요 원인으로 알려진 국지성 집중호우의 피해는 매우 심각하며, 이로 인해 치수에 대한 중요성은 날로 커지고 있다. 지금까지 사용해 왔던 홍수 예 경보 과정은 특정 지점의 유출량을 예측하기 위해서 강우-유출 모형을 운영하였다. 그러나 물리적 모형의 경우 운영에 필요한 매개변수의 결정과정이 복잡하고, 매개변수 결정을 위해 많은 자료를 필요로 한다. 또한 그 매개변수의 결정과정은 많은 불확실성을 포함하고 있어서 모형의 운영을 위한 전처리과정과 계산과정을 거치는 동안 발생한 오차가 누적되어 결과물 속에는 많은 오차가 포함되어 있다. 본 연구에서는 기존의 홍수 예 경보 시스템의 문제점과 불확실성을 최대한 감소시키고 더 우수한 유출량 예측을 위해 neuro-fuzzy 추론 기법을 이용한 모형인 ANFIS(Adaptive Neuro-Fuzzy Inference System)를 사용하여 하천수위를 예측하였다. ANFIS는 신경회로망과 퍼지이론을 결합한 기법으로 신경회로망의 구조와 학습 능력을 이용하여 제어환경에서 획득한 입 출력 정보로부터 언어변수의 membership 함수와 제어규칙을 제어 대상에 적합하도록 자동으로 조종하는 기법이다. 본 연구에서는 ANFIS를 사용하여 탄천 하류에 위치한 대곡교의 수위를 예측하였다. 분석을 위해 2007년부터 2011년까지의 탄천 유역의 관측 강우자료와 수위 자료 중 강우강도와 지속시간, 강우 형태에 따라 7개의 강우사상을 선정하였다. 학습자료 및 보정자료의 변화에 따른 예측 오차를 비교하여 모형의 적용성과 적정성을 평가하였다. 적용결과 입력자료 구성의 경우 해당 시간의 강우량 및 수위자료와 10분 전 강우자료를 이용한 모델이 가장 우수한 예측을 보였고, 학습자료의 경우 자료의 길이가 길고, 최대홍수량이 큰 경우 가장 우수한 예측 결과를 보였다. 본 연구의 적용결과 가장 우수한 모형의 경우 30분 예측 첨두수위 오차는 0.32%, RMSE는 0.05m 이고 예측시간이 길어짐에 따라 오차가 비선형적으로 증가하는 경향을 보였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.405-409
• /
• 2018

최근 기후변화로 인해 기온, 강수량 등 농업에 직접적인 영향을 주는 환경요인의 변화가 급격하게 진행되고 있으며, 식량농업기구 (Food and Agriculture Organization of the United Nations, FAO)는 기후변화로 인해 전 세계적인 식량위기가 발생할 가능성이 크다고 경고하고 있다. 농업 시스템의 생산 능력을 확보하기 위해 수자원의 효율적인 공급 및 분배, 수확량 예측, 토지 특성 파악 등 농업 생산 제한요소에 대한 빠른 정보수집이 요구되고 있다. 재해관리 분야에서 원격탐사 기술은 재해 발생을 인지하고 발생지역의 재해 진행과 피해 정도를 신속하게 제공할 수 있다는 점에서 효용성이 높다. 또한 위성 영상을 이용할 경우 접근이 용이하지 못한 지역의 조사가 수월하며, 장기적인 변화관측이나 환경감시 등 광역적 접근이 가능하다. 최근 위성영상을 통한 다양한 신호의 데이터 취득 및 가공이 가능하게 됨에 따라 주기적이고 동일한 정확도로 지상자료의 획득이 가능하다는 측면에서 인공위성을 활용한 농업 분야에서의 가뭄 분석 연구의 필요성이 대두되었다. 위성영상 신호를 통해 농업 가뭄에 활용되고 있는 지표로는 정규식생지수 (Normalized Difference Vegetation Index, NDVI) 및 식생상태지수 (Vegetation Condition Index, VCI), 식생가뭄반응지수(Vegetation Drought Response Index, VegDRI) 등이 있다. 잠재 증발산과 실제 증발산의 비를 이용한 위성영상기반의 가뭄지수인 Evaporative Stress Index (ESI)는 일반적으로 사용되는 가뭄지수인 표준강수지수(Standardized Precipitation Index, SPI), 파머가뭄심도지수 (Palmer Drought Severity Index, PDSI) 등과 비교하였을 때, 가뭄에 더 민감하고 빠른 반응을 보인다는 연구 결과로부터 짧은 기간의 급속하게 발생하는(rapid-onset) Flash drought의 가뭄판단지표로 활용되고 있다. 본 연구에서는 과거 우리나라에 발생했던 극심한 가뭄 사상을 대상으로 ESI의 가뭄분석을 통해 타 지표와의 차별성을 확인하고 농업 가뭄 모니터링의 새로운 지표로써 적용성을 검토하고자 한다.

• Journal of the Korean Society of Radiology
• /
• v.12 no.3
• /
• pp.343-349
• /
• 2018

Dose rate regulated tracking is known to be an efficient method which adaptively delivers tracking treatments when patient breathing is irregular. The Motion Management Interface (MMI, Varian Medical System, CA), which provides beam on/off switching during treatment is available for clinic. Study is to test if delivering the adaptive tumor tracking is feasible for irregular breathing using beam switching with MMI. 55 free breathing RPM traces acquired from lung cancer patients are used. The first day RPM traces of the patients are utilized to design preprogrammed tracking MLC patterns, of which periods are intentionally reduced by 20% in order to catch up the variation of patient breathing irregularity in the treatment day. Eligibility criteria for this technique are the variation of amplitude and period less than 20%. An algorithm which determines beam on/off every 100 ms by considering the preprogrammed (MLC) positions and current breathing positions is developed. Tracking error and delivery efficacy are calculated by simulating the beam-switching adaptive tracking from the RPM traces. Breathing patterns of 38 patients (70%) met the eligibility criteria. Tracking errors of all of the cases who meet the criteria are less than 2 mm (average 1.4 mm) and the average delivery efficacy was 71%. Those of rest of the cases are 1.9 mm and 48%. Adaptive tracking with beam switching is feasible if patient selection is based on the eligibility criteria.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.859-869
• /
• 2008

These days, almost every industry's production line has become automatic and this phenomenon brought a lot of benefits such as increase in productivity and economical effect, assurance in industrial safety, better quality and compatibility. However, unlike industrial production line, in construction industry, automation has number of barriers like uncertainty incidents and intellectual judgment to make ability to make solution out of it. Therefore construction industry is still demanding use of construction machine through labor. Due to this matter operational labor in construction industry is aging and fading. To solve these problem, in developed nations like Europe, US or Japan are keep researching for the automation in construction and road pavement, strengthening and some other simple operations have been worked through automation but in civil engineering site, automation research is still low despite of its importance in constructional site. For automating civil engineering operation, effective operational plan have to be set by analyzing ground information acquainted. If skillful worker apply heuristics, trial & error can be reduced with increased safety and the effective work plan can be established. Hence, this research will introduce Intellectual Task Planning System for Intelligent Excavating System's effective work plan and heuristics applied in each steps.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.3
• /
• pp.65-72
• /
• 2020

With the development of information technology and the growth of the scale of system and network, cyber threats and crimes continue to increase. To cope with these threats, cybersecurity training based on actual attacks and defenses is required. However, cybersecurity training requires expert analysis and attack performance, which is inefficient in terms of cost and time. In this paper, we propose a cyber attack simulator that automatically executes attack techniques. This simulator generates attack scenarios by combining attack techniques modeled to be implemented and executes the attack by sequentially executing the derived scenarios. In order to verify the effectiveness of the proposed attack simulator, we experimented by setting an example attack goal and scenarios in a real environment. The attack simulator successfully performed five attack techniques to gain administrator privileges.

• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.1-7
• /
• 2017

Climate change adaptation must be prepared, because the pattern of climate change in Korea is higher than the global average. In particular, it is estimated that Korea's economic loss due to climate change will reach 2,800 trillion won, and at least 300 trillion won will be needed for adaptation to climate change(KEI, 2011). Accurate climate change forecasts and impact forecasts are essential for efficient use of enormous climate change adaptation costs. For this climate change prediction and impact analysis, it is necessary to grasp not only the global average concentration but also the inhomogeneity of the greenhouse gas concentration which appears in each region. In this study, we analyze the feasibility of developing a greenhouse gas observation satellite, which is a cause of climate change, and present a development plan for a low orbit environmental satellite by examining the current status of the operation of the greenhouse gas observation satellite. The GHG monitoring satellite is expected to expand the scope of environmental monitoring by water/soil/ecology in addition to climate change, along with weather/agriculture/soil observation satellites.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.747-754
• /
• 1999

Mobile Agent is a movable software program that autonomously runs on behalf of its operator in a network environment. It has been widely applied to various kinds of computer engineering. In this paper, a network management architecture using the mobile agent technology in the distributed network environment is proposed. After manager system creates the mobile agent, it searches a proxy, a distributed object that acts as the substitute for a SNMP agent. In order to get the management information that manager requires, the mobile agent goes to the proxy and does operations on it. So, only the concise results from the operation are sent to the managing system. The proposed architecture is based on CORBA that provides several transparent characteristics in the distributed environment. In additional, the proxy object that represents the SNMP agent enables the mobile agent and the SNMP agent to converse with themselves. In this architecture, the mobile agent can carry out an automated management function, easily change and modify management functions. Therefore, it can provide an efficient management way.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.45-57
• /
• 2012

The street trees in the urban areas provide an comfortable environment to the pedestrians and drivers and play important roles to absorb the carbons. Therefore, it is necessary to acquire and manage efficiently the location, height, and crown width of street trees. This study suggests a methodology to provide quantitative information of the street trees in urban areas including the quantity, location, height, and crown width of the trees. Therefore, it is more appropriate to add functionality of changing size of the crown width of the trees in the method. In addition, the positions of the street trees were selected using the fact that street trees are generally planted along the road in a straight line. An experiment on extracting street trees was conducted in parts of Osan-si, Gyeonggi-do and the suitability of the suggested methodology was evaluated by comparing the results to a 1/1,000 digital map. Through the experimental results, the minimum, maximum, and the root mean square errors of the position of street trees were 0.5m, 1.9m, and approximately ${\pm}0.4m$, respectively.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.3 s.30
• /
• pp.51-59
• /
• 2004

In the study, there has been a sharp upward trend in road maintenance cost as the expansion of road networks increases. Running a pavement management system(PMS) is indispensable for efficient and scientific maintenance of the whole road networks with limited maintenance budgets. With a PMS, a maintenance plan should be drawn up after surface conditions are precisely examined and analyzed. The majority of the present PMSs are run by the fact that experts first examine surface conditions on sites, and then enter results into systems. However, considering the actual circumstances of the present time and the increase in paved road hereafter, it is inefficient that experts examine the whole paved roads in person and long-lasting PMSs can not be kept up. As a result, after analyzing the accuracy of 3-D coordinates representing road surfaces that was decided using multi orientation and digital photogrammetry, the average of standard errors turned out to be 0.0427m on the X-axis, 0.0527m on the Y-axis and 0.1539m on the Z-axis. It was found to be good enough to be put to practical use for maps drawn on scales below 1 :1000, which are being currently made and used within the country, and GIS data.