• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.73-85
• /
• 2000

The efficient algorithms are suggested in this study for solving the multicommodity network flow problems applied to Communications Systems. These problems are typical NP-complete optimization problems that require integer solution and in which the computational complexity increases numerically in appropriate with the problem size. Although the suggested algorithms are not absolutely optimal, they are developed for computationally efficient and produce near-optimal and primal integral solutions. We supplement the traditional Lagrangian method with a price-directive decomposition. It proceeded as follows. First, A primal heuristic from which good initial feasible solutions can be obtained is developed. Second, the dual is initialized using marginal values from the primal heuristic. Generally, the Lagrangian optimization is conducted from a naive dual solution which is set as ${\lambda}=0$. The dual optimization converged very slowly because these values have sort of gaps from the optimum. Better dual solutions improve the primal solution, and better primal bounds improve the step size used by the dual optimization. Third, a limitation that the Lagrangian decomposition approach has Is dealt with. Because this method is dual based, the solution need not converge to the optimal solution in the multicommodity network problem. So as to adjust relaxed solution to a feasible one, we made efficient re-allocation heuristic. In addition, the computational performances of various versions of the developed algorithms are compared and evaluated. First, commercial LP software, LINGO 4.0 extended version for LINDO system is utilized for the purpose of implementation that is robust and efficient. Tested problem sets are generated randomly Numerical results on randomly generated examples demonstrate that our algorithm is near-optimal (< 2% from the optimum) and has a quite computational efficiency.

• Management & Information Systems Review
• /
• v.35 no.3
• /
• pp.155-171
• /
• 2016

Separation of management with ownership induces the agency problems between CEO and shareholders of Chinese firms. To solve this problem Chinese government has enforced the "stock incentive management law for stock listed companies" since 2006. However, it has not been clear that this law is beneficial to reduce the agency cost and thus to increase the performance of Chinese firms. This study aims to answer this question. It is specifically designed to explore the effects of CEO's stock incentive on the performance of Chinese firms. It also examines the moderating effects of the characteristics of the board of directors on this relationship. Using a multi-year sample (2008-2014), we found that CEO's stock incentive is positively related to firm's performance. We also found that the equity stakes of board members strengthens the positive relations between CEO's equity incentives and firms' performance. On the other hand, contrary to expectations, the independency of the board of directors does not significantly moderate the relationship between CEO's equity incentives and firms' performance. Based on the findings, this study provides valuable implication for theory and practice.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.3
• /
• pp.89-99
• /
• 2021

A brand community refers to a group of people who have a passion and loyalty for the brand, and is attracting attention as an effective marketing strategy to increase brand equity because it actively tends to support and promote the brand without expecting compensation. The objective of this study is to identify factors that are needed for sustainable brand community management. Existing studies on brand community management have mainly been conducted by quantitative methods measuring consumer satisfaction and dissatisfaction towards brand community activities, however, this study applied qualitative methods using means-end chains and laddering approaches in order to deeply identify a consumer's desired value on brand community activities. An in-depth interview of 41 members of BTS ARMY, a representative example of brand community, has been conducted and analyzed. The result of this study is as follows. In order to encourage active brand community activities, it is important to provide brand community members with a variety of high-quality brand-related content for a unique aesthetic experience, and a forum where all members can interact and exchange information and ideas to enhance brand value and experience. Finally, to nurture a strong brand community as a partner to co-create brand equity, rather than just a fan community, it is needed to build an environment that fosters opportunities for brand community members to increase self-respect and fulfillment through their brand community activities.

• Journal of Distribution Science
• /
• v.9 no.3
• /
• pp.83-94
• /
• 2011

Most domestic companies, with the exclusion of major firms, are reluctant to implement a supply chain management (SCM) network into their operations. Most small- and medium-sized enterprises are not even aware of SCM. Due to the inherent total-systems efficiency of SCM, it coordinates domestic manufacturers, subcontractors, distributors, and physical distributors and cuts down on cost of inventory control, as well as demand management. Furthermore, a lack of SCM causes a decrease in competitiveness for domestic companies. The reason lies in the fundamentality of SCM, which is the characteristic of information sharing, process innovation throughout SCM, and the vast range of problems the SCM management tool is able to address. This study suggests the contemplation and reformation of the current SCM situation by analyzing the SCM strategic plan, discourses and logical discussions on the topic, and a successful case for adapting SCM; hence, the study plans to productively "process" SCM. First, it is necessary to contemplate the theoretical background of SCM before discussing how to successfully process SCM. I will describe the concept and background of SCM in Chapter 2, with a definition of SCM, types of SCM promotional activities, fields of SCM, necessity of applying SCM, and the effects of SCM. All of the defects in currently processing SCM will be introduced in Chapter 3. Discussion items include the following: the Bullwhip Effect; the breakdown in supply chain and sales networks due to e-business; the issue that even though the key to a successful SCM is cooperation between the production and distribution company, during the process of SCM, the companies, many times, put their profits first, resulting in a possible defect in demands estimation. Furthermore, the problems of processing SCM in a domestic distribution-production company concern Information Technology; for example, the new system introduced to the company is not compatible with the pre-existing document architecture. Second, for effective management, distribution and production companies should cooperate and enhance their partnership in the aspect of the corporation; however, in reality, this seldom occurs. Third, in the aspect of the work process, introducing SCM could provoke corporations during the integration of the distribution-production process. Fourth, to increase the achievement of the SCM strategy process, they need to set up a cross-functional team; however, many times, business partners lack the cooperation and business-information sharing tools necessary to effect the transition to SCM. Chapter 4 will address an SCM strategic plan and a case study of LG Electronics. The purpose of the strategic plan, strategic plans for types of business, adopting SCM in a distribution company, and the global supply chain process of LG Electronics will be introduced. The conclusion of the study is located in Chapter 5, which addresses the issue of the fierce competition that companies currently face in the global market environment and their increased investment in SCM, in order to better cope with short product life cycle and high customer expectations. The SCM management system has evolved through the adaptation of improved information, communication, and transportation technologies; now, it demands the utilization of various strategic resources. The introduction of SCM provides benefits to the management of a network of interconnected businesses by securing customer loyalty with cost and time savings, derived through the consolidation of many distribution systems; additionally, SCM helps enterprises form a wide range of marketing strategies. Thus, we could conclude that not only the distributors but all types of businesses should adopt the systems approach to supply chain strategies. SCM deals with the basic stream of distribution and increases the value of a company by replacing physical distribution with information. By the company obtaining and sharing ready information, it is able to create customer satisfaction at the end point of delivery to the consumer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.97-107
• /
• 2015

An analytical model was developed to estimate the viscous and squeeze-film damping ratios of heat exchanger tubes subjected to a two-phase cross-flow. Damping information is required to analyze the flow-induced vibration problem for heat exchange tubes. In heat exchange tubes, the most important energy dissipation mechanisms are related to the dynamic interaction between structures such as the tube and support and the liquid. The present model was formulated considering the added mass coefficient, based on an approximate model by Sim (1997). An approximate analytical method was developed to estimate the hydrodynamic forces acting on an oscillating inner cylinder with a concentric annulus. The forces, including the damping force, were calculated using two models developed for relatively high and low oscillatory Reynolds numbers, respectively. The equivalent diameters for the tube bundles and tube support, and the penetration depth, are important parameters to calculate the viscous damping force acting on tube bundles and the squeeze-film damping forces on the tube support, respectively. To calculate the void fraction of a two-phase flow, a homogeneous model was used. To verify the present model, the analytical results were compared to the results given by existing theories. It was found that the present model was applicable to estimate the viscous damping ratio and squeeze-film damping ratio.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.167-174
• /
• 2010

Recently the distributed topology control algorithm for constructing the Recrystallization Topology in the unstructured peer-to-peer network was proposed. In this paper, we prove that such a hierarchical topology is a scale-free power-law network. We present a model of a construction process of the distributed protocol, and analyze it based on a mean-field approximation and the continuum theory, so that we show that the constructed Recrystallization Topology is a scale-free network. In the proposed model, all nodes are born with some initial attractiveness and the system incorporates the rewiring of some links at every time step. Some old links are removed with the anti-preferential probability, and some new links are added with preferential probability. In other words, according to the distributed algorithm, each node makes connections to the more-preferential nodes having higher hit-ratio than other nodes, while it disconnects the anti-preferential nodes having lesser hit-ratio. This gives a realistic description of the local processes forming the recrystallization topology in unstructured peer-to-peer network. We calculate analytically the degree distribution. The analytic result indicates that the constructed network is a scale-free network, of which the scaling exponent is 3.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.3
• /
• pp.184-193
• /
• 2010

This paper proposes a biological iridescence BRDF(Bidirectional Reflectance Distribution Function) compression and rendering method. In the graphics technology, iridescence sometimes is named structure colors. The main features of these symptoms are shown transform of color and brightness by varying viewpoint. Graphics technology to render this is the BRDF technology. The BRDF methods enable realistic representation of varying view direction, but it requires a lot of computing power because of large data. In this paper, we obtain reflection map from iridescence BRDF, analyze color of reflection map and propose representation method by several colorfully concentric circle. The one concentric circle represents beam width of reflection ray by one normal vector. In this paper, we synthesize rough concentric by using several virtually optical normal vectors. And we obtain spectrum information from concentric circles passing through the center point. The proposed method enables IBR(image based rendering) technique which results is realistic illuminance and spectrum distribution by one texture from reduced BRDF data within spectrum.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.79-102
• /
• 2014

A parallel importation is a non-counterfeit product imported from another country without the permission of the intellectual property owner. It is caused by price differences between countries. Therefore parallel importation are implication in issues of international trade and intellectual property rights(hereafter referred as IPR). This paper provides parallel importation issues of Korea and China under the IPR laws such as patent, trademarks, copyright and analyzes difference between two countries. In China, patent law regulates exhaustion rights which is based theory of a parallel import for the first time unlike trademark law and copyright law. On the other hands, Korea rules parallel importing under Korean customs regulations. In conclusion, two countries have no provisions that advocate a parallel import under IPR laws. This paper suggests some improvements to overcome the limitation of current regulation system and avoid trade friction between two countries. First of all, two countries should clearly make a rule about parallel import in IPR law such as definition of parallel importation, genuine goods, permission conditions, importing proses, penalty and remedy etc. Secondly, two countries should prohibit an abuse of a exclusive import agent's rights and manage a parallel importer not to cause consumer's complain about goods to expansion parallel imports. Finally, two countries should cooperate not to cause disputes about this issue with a communication channel.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.9
• /
• pp.459-466
• /
• 2007

TCP/IP processing imposes a heavy load on the host CPU when it is processed by the host CPU on a very high-speed network. Recently the TCP/IP Offload Engine (TOE), which processes TCP/IP on a network adapter instead of the host CPU, has become an attractive solution to reduce the load in the host CPU. There have been two approaches to implement TOE. One is the software TOE in which TCP/IP is processed by an embedded processor and the other is the hardware TOE in which TCP/IP is processed by a dedicated ASIC. The software TOE has poor performance and the hardware TOE is neither flexible nor expandable enough to add new features. In this paper we designed and implemented a hybrid TOE architecture, in which TCP/IP is processed by cooperation of hardware and software, based on an FPGA that has two embedded processor cores. The hybrid TOE can have high performance by processing time-critical operations such as making and processing data packets in hardware. The software based on the embedded Linux performs operations that are not time-critical such as connection establishment, flow control and congestions, thus the hybrid TOE can have enough flexibility and expandability. To improve the performance of the hybrid TOE, we developed a hardware-based transmission/reception accelerator that processes important operations such as creating data packets. In the experiments the hybrid TOE shows the minimum latency of about $19{\mu}s$. The CPU utilization of the hybrid TOE is below 6 % and the maximum bandwidth of the hybrid TOE is about 675 Mbps.