• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.273-277
• /
• 2007

하수처리장 현황은 2005년을 기준으로 271개소이며 2006년에는 23개소(526.1천톤/일)가 완공되어 총 294개소(22백만톤/일)의 하수처리장이 운영중에 있다. 또한 2006년내에 완공예정인 처리장은 68개소(693.5천톤/일)로서 2007년도에는 총 362개소(23,087천톤/일)로 예상하고 있다. 하수처리수를 년간으로 환산하면 약 84억톤 정도이며 이는 전체 수자원이용량 331억톤의 25%에 해당하는 수치이며, 농업용수이용량인 158억톤의 53%를 차지하는 규모이다. 이처럼 매년 $5{\sim}7%$씩 하수처리수가 늘어나고 있으며 더욱이 대부분 기존의 관개용 수리시설에 인접하여 방류되어 직 간접적으로 재이용되고 있는 실정이다. 본 연구에서는 기존 농업기반시설에 인접한 하수처리수가 얼마큼 농업에 영향을 주고 있는지를 파악하기 위해 GIS 기법을 이용하여 하수처리장으로부터 일정한 거리에 인접하거나 방류지점 하류에 위치한 관개용 수리시설을 찾아내어 재이용 관리지역으로 선정하였고 현장조사를 실시하여 재이용정보를 DB로 구축하였다. 연구결과 전국 271개소 하수처리장중 관개용 수리시설보다 상류측에 있으면서 반경 1.5km 이내에 위치한 하수처리장은 127개소로 나타났으며 현장조사결과 많은 지역에서 하수처리수를 농업용으로 직접 또는 간접적으로 이용하고 있었다. 이처럼 주변상황으로 인해 하수처리수를 농촌용수로 이용할 수밖에 없는 지역이 발생하고 있고 앞으로도 하수처리장이 계속 증설되고 있는 한 기존의 농업수리시설물은 하수처리수의 영향이 더욱 커질 것으로 판단되므로 하수처리장 주변의 농업기반시설에 대한 지속적인 관리가 필요하다.의(2005년 10월 19일)에서는 농업용수 10% 절약 대책과 유역단위의 통합적 물 관리를 요구하게 되었다. 우리나라는 현실적으로 매년 홍수 피해가 발생하고 있지만, 다른 한편 인구밀도가 높고 1인당 가용 수자원이 상대적으로 적기 때문에 국지적 물 부족 문제를 경험하고 있다. 최근 국제적으로도 농업용수의 물 낭비 최소화와 절약 노력 및 타 분야 물 수요 증대에 대한 대응 능력 제고가 매우 중요한 과제로 부각되고 있다. 2006년 3월 멕시코에서 개최된 제4차 세계 물 포럼에서 국제 강 네트워크는 "세계 물 위기의 주범은 농경지", "농민들은 모든 물 위기 논의에서 핵심"이라고 주장하고, 전 프랑스 총리 미셀 로카르는 "...관개시설에 큰 문제점이 있고 덜 조방적 농업을 하도록 농민들을 설득해야 한다. 이는 전체 농경법을 바꾸는 문제..."(segye.com, 2006. 3. 19)라고 주장하는 등 세계 물 문제 해결을 위해서는 농업용수의 효율적 이용 관리가 중요함을 강조하였다. 본 연구는 이러한 국내외 여건 및 정책 환경 변화에 적극적으로 대처하고 물 분쟁에 따른 갈등해소 전략 수립과 효율적인 물 배분 및 이용을 위한 기초연구로서 농업용수 수리권과 관련된 법 및 제도를 분석하였다.. 삼요소의 시용 시험결과 그 적량은 10a당 질소 10kg, 인산 5kg, 및 가리 6kg 정도였으며 질소는 8kg 이상의 경우에는 분시할수록 비효가 높았으며 특히 벼의 후기 중점시비에 의하여 1수영화수와 결실율의 증대가 크게 이루어졌다. 3. 파종기와 파종량에 관한 시험결과는 공시품종선단의 파종적기는 4월 25일부터 5월 10일경까지 인데 이 기간중 일찍 파종하는 경우에 파종적

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.3 no.4
• /
• pp.215-219
• /
• 2001

Land surface parameterization schemes for atmospheric models as well as decision support tools for ecosystem management require a frequent updating of land cover classification data for regional to global scales. Rice paddies have not been treated independently from other agricultural land classes in many classification systems, despite their atmospheric and ecological significance. A simple but improved method over conventional land cover classification schemes for rice paddy is suggested. Normalized difference vegetation index (NDVI) was calculated for the land area of South Korea at a 1km by 1 km resolution from the visible and the near-infrared channel reflectances of NOAA-AVHRR (Advanced Very High Resolution Radiometer). Monthly composite images of daily maximum NDVI were prepared for May and August, and used to classify 4 major land cover classes : urban, farmland, forests and water body. Among the pixels classified as "forests" in August, those classified as "water body" in May were assigned a "rice paddy" class. The distribution pattern of "rice paddy" pixels was very similar to the reported rice acreage of 1,455 Myons, which is the smallest administrative land unit in Korea. The correlation coefficient between the estimated and the reported acreage of Myons was 0.7, while 0.5 was calculated from the USGS classification.calculated from the USGS classification.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2018

Project Management Institute of America separates the types of risk with external risks and internal risks. The external risk is an uncontrollable risk in projects such as changes of policy and related systems, climate, natural disasters, exchange rates and so on. The internal risk is an existing risk in the project itself that is controllable items in the project. Technical risks in project management are cost, quality, time, safety and environment. Therefore, both the external and internal risks should be managed to perform the construction project successfully. In particular, we can secure the quality and safety of facilities through the technical risk management. The importance of potential risk management has been emerging as a major interest and the lack of risk management delays projects and increases construction costs with negative effects of the building safety since the complex building, which is composed of a great number of facilities, consists of many project units and there are conflicts between various participants and stake-holders. This study presents the ways of establishing risk management processes to ensure the safety of the complex building. To that end, establishing procedure of risk management processes is presented and types of risk and factors in construction projects and counter strategies are presented as available risk information on the stages.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.220-232
• /
• 2012

In this paper, we investigate the correlation result due to the problems of delay tracking and fringe rotation module in the VCS(VLBI Correlation Subsystem). The VCS, FX-type correlator, adopts the delay tracking and fringe rotation module in order to compensate the delay change and fringe phase of wave signal from the radio source by Doppler's effect. The phase of observed data is also compensated by means of delay tracking and fringe rotation in the correlator, but we confirmed that the phase is unstable by applying long integration period of AIPS(Astronomical Image Processing System) rather than correlator. And the delay value of observed data has the errors of several tens nanoseconds than normal case at the analysis of correlation result. In addition, we found that the phase of correlation results is not connected as the unit of FFT-segment because the initial fringe phase at the fringe rotation module is not correctly determined. In this paper, in order to solve these problems, the original direction of 90 degree phase jump is reversely modified when the bit-shift occurred at the delay tracking. And the initial fringe phase at the fringe rotation module is correctly modified by using the initial phase of observed data. In addition, the parameter calculation module was abnormally operated as designed in the fringe rotation. So, the logical program by the VCS is modified so as to calculate the parameters correctly. Through the experiments of correlation processing over the above problems, the modified proposal algorithm is adequately corrected to the data analysis results, so that the experimental results make it clear for us to operate the developed VCS hardware correlator normally.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.286-296
• /
• 2019

Land suitability assessments have been a crucial issue for enhancing productivity in agriculture and conserving agricultural lands. Based on soil and climate information, land suitability assessment for peaches (Prunus persica) and grapes (Vitis vinifera L.) were conducted using the maximum limiting characteristic method (MLCM) in South Korea. In peaches, S1 (highly suitable) exists on 2.21% of the land, S2 (moderately suitable) on 19.20%, N1 (currently not suitable) on 12.07%, and N2 (permanently not suitable) on the remaining 66.52%. In grapes, 3.65% of the land is classified as S1, 17.98% as S2, 11.85% as N1 and 66.52% as N2. In both fruit trees, the results acquired from soil and climatic information were similar to those from soil information alone. The data also suggest that the grades by soil information were relatively low over the land. With the assumption that the more suitable area a province has, the more will be cultivated for the fruit trees, we compared the percentages of area for peach and grape farming per province with the results by MLCM, and suggested that some provinces with a small percentage of farm can be encouraged to plant more in suitable areas as dictated by MLCM for the species. In the near future, we plan to use an advanced method such as analytic hierarchy process (AHP) to conduct similar tests, in which having reference data of yields or benefits per farm can efficiently increase the accuracy of the measurements.

• Journal of Bio-Environment Control
• /
• v.10 no.3
• /
• pp.172-180
• /
• 2001

A grape fruit is required for a lot of labor to harvest in time in Korea, since the fruit is cut and grabbed currently by hand. In foreign country, especially France, a grape harvester has been developed for processing to make wine out of a grape, not to eat a fresh grape fruit. However, a harvester which harvests to eat a fresh grape fruit has not been developed yet. Therefore, this study was designed and constructed to develope a image processing system for a fresh grape harvester. Its development involved the integration of a vision system along with an personal computer and two cameras. Grape recognition, which was able to found the accurate cutting position in three dimension by the end-effector, needed to find out the object from the background by using two different images from two cameras. Based on the results of this research the following conclusions were made: The model grape was located and measured within less than 1,100 mm from camera center, which means center between two cameras. The distance error of the calculated distance had the distance error within 5mm by using model image in the laboratory. The image processing system proved to be a reliable system for measuring the accurate distance between the camera center and the grape fruit. Also, difference between actual distance and calculated distance was found within 5 mm using stereo vision system in the field. Therefore, the image processing system would be mounted on a grape harvester to be founded to the position of the a grape fruit.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.51-62
• /
• 2020

Starting with the "Smart Grid National Road Map" in 2010, the Smart Grid 2030 was introduced through the basic plan and implementation plan of the intelligent power grid with the goal of building the world's first national smart grid. In this paper, we intend to build a power domain ontology based on the power business platform based on the upper and lower conceptual models of the "Smart Grid Interoperability Standard Framework and Roadmap", the standard of implementation plan. Ontology is suitable for expressing and utilizing the smart grid conceptual model because it considers hierarchical structure as knowledge defines the properties of entities and relationships between entities, but there is no research related to them. Therefore, in this paper, the upper ontology was defined as a major category for smart grid-related fields, and the lower ontology was defined as detailed systems and functions for the upper ontology to construct the ontology. In addition, scenarios in various situations that could occur in the power system were constructed and significant inference results were derived through inference engines and queries.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.373-378
• /
• 2001

In order to analyze the problems and improvement methods in the quality management of domestic apartment construction projects, this study derived the four barrier factors through relevant literature survey and interviews with construction practitioners. Among these four factors, which are 1) policies and regulations, 2) technologies, 3) human and organization, and 4) other miscellaneous aspects, the human and organization factor is the main focus of this survey and it was decomposed into perception, management system, education, and system on quality management according to the Taguchi's S/N theory to survey existing problems and suggest improvement methods for them. The survey on the quality perception showed that all the members need to cooperate actively, and CEO and chief construction managers should recognize the quality as the highest priority and act by themselves accordingly. The survey on the quality management showed that they need to reform their business process to reduce redundant tasks and miscommunications among participants. Quality education should be provided in a way that people at different management level can be educated differently with close relation to their practices. Quality systems should help corrective actions against quality problems at construction fields. Also with clear quality management implantation polices and objectives, the quality system should be established in order to support better communication among project stakeholders.

• Korean Journal of Environment and Ecology
• /
• v.30 no.2
• /
• pp.261-270
• /
• 2016

The concept of Eco-welfare emerged in the process of discovering the relationship between a healthy ecosystem and human wellbeing. The objective of this study is to offer basic data for eco-welfare policy realization by conceptualizing the 'National Park Eco-welfare' since national parks are appropriate places for eco-welfare to be optimally implemented. A pre-workshop and two rounds of Delphi surveys were conducted to determine the concept of the 'National Park Eco-welfare ' and the main elements to be included in ecosystem service. Through this study, the concept of 'National Park Eco-welfare' was defined as efforts to conserve the biodiversity and sustainability of the ecosystem and create harmony between 'National Park Ecosystem Welfare' and 'National Park Human Welfare'. To establish the direction of the National Park Eco-welfare policy, we identified the main elements of ecosystem services which are appropriate for the National Park. These are comprised of 3 elements (food, fresh water and genetic resources) from supply service, all elements from regulating service and supporting/habitat service and 4 elements (aesthetic information, recreation-based ecotourism, healing, and knowledge systems with educational values) from culture service. In this study, the concept of National Park Eco-welfare was established, and its policy objectives and scope were suggested. However, further studies are necessary to develop action plans areand thereby realize the policy.