• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.233-243
• /
• 1998

The demand of high speed machining is increasing due to the high speed cutting and grinding provides high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting or grinding. This paper describes a design process of an active magnetic bearing system for a high speed grinding spindle with power 5.5kW and maximum speed 60,000rpm. Magnetic actuators are designed by the magnetic circuit theory considering static load condition, and examined with FEM analysis. Dynamic characteristics are also considered, such as bandwidth, stiffness, natural frequency and static deflection. System characteristics are simulated with a rigid rotor model.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.608-611
• /
• 2005

As the optical communication industry is developed, the demand of optical communication part is increasing. $ZrO_2$ ceramic ferrule is very important part which can determines the transmission efficiency and information quality to connect the optical fibers. In general $ZrO_2$ ceramic ferrule is manufactured by grinding process because the demands precision is very high. For the precision grinding machining, it is very important that the error of feeding system is improved. Therefore, we estimated the dynamic characteristics in feeding system of ultra precision co-axial grinding machining system. Then, we performed the machining characteristics experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.103-108
• /
• 1999

A problem in the grinding with a small diametric wheel is the decrease of wheel speed. In order to resolve this problem, an accelerating unit which increases the wheel speed is recommended. In this paper, the accelerating effect of an accelerating unit has been investigated through the side-cut grinding experiments performed with a vitrified bonded CBN wheel in a machining center(MC). The static stiffness, normal force, and machining error were measured in the experiments. As the accelerating unit is attached on the column of machining center, the static stiffness of tool system is largely decreased. But as the wheel speed increased by the accelerating unit, this problem is overcome and machining efficiency is improved. The lesser the quill stiffness was, the higher the accelerating effect became.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.37-45
• /
• 2004

Grinding is a finishing operation of products in various areas. Surface roughness of industrial components obtained in grinding operation is a critical quality measure but is a function of many operating parameters and their interactions. To achieve higher surface roughness and to identify the influence of grinding parameters on surface roughness, it is an ideal situation fer using the design of experiments. This paper presents an successful optimization of grinding conditions and prediction of surface roughness using the design of experiments. From the experimental verification tests, it was observed that this approach was useful as a robust design methodology for grinding operation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.46-51
• /
• 2002

A grinding technology is very essential to finish the surface of IT and BT industrial application parts such as wafer, optical connection part and lenses etc. However the finding machine has bead depended on imports. Especially, it is completely imported for machining high precision part relevant to domestic electric and communicational industries. The amount to import grinding machine is about $110milions. It takes about 35% of total import amount of all the machine tools. A domestic finder manufacturer is a very small-scaled bussinessman and research facilities is poor. Recently, it is increasing to demand high speed and precision grinding technology because it brings cost down and value added up. Its further study will be something related to inteligent grinding system fur value added and high precision part. It will make domestic grinding technology to its advanced country level.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.37-44
• /
• 1995

Grinding is used for machining high precision parts with high additional value. However, the grinding operation needs high skill and long experience of an operator because of a lack of the scientific knowledge and engineering principles. Also, the wheel and grinding conditions affect grinding results. For these reasons, it is difficult to construct computer integrated manufacturing system(CIMA). Therefore, it is necessary for Expert System to be informed of qualitative knowledge of grinding expert's skills and experiences. In this research, the Grinding Expert System is constructed by Fuzzy Decision Making Algorithm. Using this system, unskilled workers will be able to use the knowledge and experience of an expert.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.211-218
• /
• 1994

Grinding is considered as a very effective machining technology to attain high production rates and a good surface quality of hard and brittle components. However, the grinding operations till needs the skill and the experience of an operator because of a lack of scientific knowledge and engineering principles. This is the reason why grinding operations are not completley intergrated in CIMS(Computer Intergrated Manufacturing System. Recent develop- ment focus on expert system which deals with domain specific knowledge in order to solve this problem. Firstly, in this study, a basic strategy to develop the grinding knowledge-base for grinding is discussed. Next, the architecture of knowledge-base and management of the grinding knowledge-base(GKB) is described.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.10
• /
• pp.155-161
• /
• 2000

Recently, environmental pollution has become a big problem in industry and many researches have been done in order to preserve the environment. In the grinding process, the coolant has great influence on environment. It contains several chemicals(sulfur, phosphorus and chlorine) to improve the grinding efficiency. If these additives go into the workplace atmosphere, it is harmful for workers. It can also cause the environment pollution. Because of these reasons many studies have been done to minimize the amount of coolant. However the small amount of coolant can cause the thermal defect on the ground surface layer. This study forced the effects of the compressed cold air when the spindle shaft materials(SCM4 & SCM21) were cylindrical ground with WA wheel. The compressed cold air was used as the coolant and grinding performance was compared with that of the conventional grinding fluids(emulsion). Many experiments were carried out with these two cooling materials. The surface roughness, residual stress, and roundness were measured for the cylindrical grinding. The test results showed that the compressed cold air was very useful as the cooling materials for grinding process. It was also efficient to minimize the thermal defects of workpiece and could also play a role in solving environmental pollution.

• Korean Journal of Optics and Photonics
• /
• v.24 no.6
• /
• pp.331-337
• /
• 2013

A large optical surface is fabricated by grinding, polishing and figuring. The grinding process is the most rapid and has the largest amount of fabrication of all processes. If we measure the surface precisely and rapidly in the grinding process, it is possible to improve the efficiency of the fabrication process. Since the surface of grinding process is rough and not shiny, it is not easy to measure the surface using light so that we cannot use an interferometer. Therefore, we have to measure the surface using a mechanical method. We can measure the surface under the grinding process by using a laser tracker which is a portable 3-dimensional coordinate measuring machine. In this paper, we used the laser tracker to measure the surface error of 1 m diameter spherical mirror. This measurement result was compared to that of an interferometer. As a result, surface measurement error was found to be $0.2{\mu}m$ rms (root mean square) and $2.7{\mu}m$ PV (Peak to Valley), which is accurate enough to apply to the rough surface under the grinding stage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1486-1496
• /
• 1993

The diamond wheel with superabrasive is required for mirror-like surface grinding of brittle materials. But the conventional dressing mothod can not apply to the diamond wheel with superabrasive. Recently electrolytic dressing method was developed for cast-iron bonded diamond wheel with superabrasive. This technique can take replace of lapping and polishing. Using the electrolytic dressing, the surface roughness of workpiece was improved largely and grinding force was very low and the continuity of the grinding force was also very improved. In this study, the purpose is the realization of mirror-like surface grinding of ferrite with electrolytic dressing of metal bonded diamond wheel. For application of ultraprecision grinding for brittle material, superabrasive wheel, air spindle and inprocess electrolytic dressing were used. In addition, the effects of pick current and pulse width on ground surface were investigated, and the suitable dressing conditions for ferrite were found out.