• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.133-140
• /
• 2017

In this paper, we has proposed an automatic vehicle monitoring system based on computer vision technology. The real-time display system has displayed a system that can be performed in automatic monitoring and control while meeting the essential requirements of ITS. Another advantage has that for a powerful vehicle tracking, the main obstacle handing system, which has the shadow tracking of moving objects. In order to obtain all kinds of information from the tracked vehicle image, the vehicle must be clearly displayed on the surveillance screen. Over time, it's necessary to precisely control the vehicle, and a three-dimensional model-based approach has been also necessary. In general, each type of vehicle has represented by the skeleton of the object or wire frame model, and the trajectory of the vehicle can be measured with high precision in a 3D-based manner even if the system has not running in real time. In this paper, we has applied on segmentation method to vehicle, background, and shadow. The validity of the low level vehicle control tracker was also detected through speed tracking of the speeding car. In conclusion, we intended to improve the improved tracking method in the tracking control system and to develop the highway monitoring and control system.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.443-447
• /
• 2000

본 논문에서는 과학위성 1호의 전력계 설계에 대해서 서술한다 과학위성 1호의 전력계는 크게 Power stage와 Control stage로 나누어지는데 Power stage 는 200[Watt] Buck으로 구성되어 있으며 Control stage는 Hardware 제어기인 최대전력 추적기와 배터리 전압제어기 Software control을 위한 베터리 전류제어기와 직접 듀티제어기로 이루어져 각 동작모드에 따라서 적절한 제어기를 선택할 수 있게 되어있다. 따라서 신뢰성 있는 제어와 정밀제어를 선택적으로 정할 수 있기 때문에 위성의 운용면에서 용이성을 제공해 준다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.25-29
• /
• 1997

In this thesis, we construct the microrobot succor system and navigate the real-time path planning and visual tracking of each robot. The system consists robots, vision system and a host computer. Because the robots are free-ranging mobile robot, it is needed to make and gallow the path. The path is planned and controlled by a host computer, ie. Supervisory control system. In path planning, we suggest a cost function which consists of three terms. One is the smoothness of the path, another is the total distance or time, and the last one is to avoid obstacles. To minimize the cost function, we choose the parametric cubic spline and update the coefficients in real time. We perform the simulation for the path planing and obstacle avoidance and real experiment for visual tracking

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.192-197
• /
• 1992

The position error in multi-axis machine tools are due to many elements, such as the static friction, servo lag, a nonlinear disturbance, the gain mismatch between multi-axis controllers. In the work, modeling for the plant was carried out through the velocity response by the step input signal. Digital PI controllers, LQ optimal controllers and feedforward controllers are designed for a high tracking performance based on the model. The results of experimentation showed that the controllers worked properly.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.43-51
• /
• 2021

A robust tracking controller design was developed for a rotary motion control system. The friction force versus the angular velocity was measured and modeled as a combination of linear and nonlinear components. By adding a model-based friction compensator to a nominal proportional-integral-derivative controller, it was possible to build a simulated control system model that agreed well with the experimental results. A zero-phase error tracking controller was selected as the feedforward tracking controller and implemented based on the estimated closed-loop transfer function. To provide robustness against external disturbances and modeling uncertainties, a disturbance observer was added in the position feedback loop. The performance improvement of the overall tracking controller structure was verified through simulations and experiments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.394-399
• /
• 2010

This paper presents to study the velocity control method of AGV for heavy material transport. Generally, in the industries, fork-type AGV using path tracking requires high stop-precision with performing operations for 20 hours. To obtain the high stop-precision of AGV for heavy material transport, AGV requires driving technic during low speed. Hence, we use encoder with keeping the speed of AGV and study the velocity control method to improve for the stop-precision of AGV. To experiment the proposed the velocity control method, we performed the experiments engaging the pallet located 4m in front of the AGV. In the experimental result, the maximum error of stop-precision was less than 18.64mm, and we verified that the proposed method is able to control stable.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.87-95
• /
• 2007

In this paper, we analyzed the mr detection and the stability of the object tracking system by an adaptive stereo object hacking using region-based MAD(Mean Absolute Difference) algorithm and the modified PID(Proportional Integral Derivative)-based pan/tilt controller. That is, in the proposed system, the location coordinates of the target object in the right and left images are extracted from the sequential stereo input image by applying a region-based MAD algorithm and the configuration parameter of the stereo camera, and then these values could effectively control to pan/tilt of the stereo camera under the noisy circumstances through the modified PID controller. Accordingly, an adaptive control effect of a moving object can be analyzed through the advanced system with the proposed 3D robot vision, in which the possibility of real-time implementation of the robot vision system is also confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1574-1580
• /
• 2008

In this paper, to bring under robust and accurate control of auto-equipment systems which disturbance, parameter alteration of system, uncertainty and so forth exist, neural network controller called dynamic neural processor(DNP) is designed In order to perform a elaborate task like as assembly, manufacturing and so forth of components, tracking control on the trajectory of power coming in contact with a target as well as tracking control on the movement course trajectory of end-effector is indispensable. Also, the learning architecture to compute inverse kinematic coordinates transformations in the Plants of auto-equipment systems is developed and the example that DNP can be used is explained. The architecture and learning algorithm of the proposed dynamic neural network, the DNP, are described and computer simulations are provided to demonstrate the effectiveness of the proposed learning method using the DNP.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1011-1017
• /
• 2011

Servo control loops are a core part in the control architecture of machine tools. Servo control loops manage acceleration, velocity and position of all the axes in a machine tool based on commands. The performance of servo control loops sets the basis for quality of production paris and cycle time reduction. First, this paper presents a general control architecture of machine tools and several control schemes in literature, which can be applicable to machine tools control; including Zero Phase Error Tracking Control (ZPETC) and Cross Coupling Control (CCC). After that, modem control strategies to mitigate the problem of high speed machining are reviewed. In high speed machining, high accelerations excite the machine structure up to high frequencies, thereby exciting the structure's modes of vibration. These structural vibrations need to be damped if accurate positioning or trajectory following is required. Input shaping is an attractive option in dealing with structural vibrations. The advantages and drawbacks of using input shaping technique for machine tools are discussed in detail.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.673-683
• /
• 2010

This study investigates Terrain Aided Inertial Navigation(TAIN) which consists of Inertial Navigation System (INS) with the optical sensor for precise planetary landing. Image processing is conducted to extract the feature points between measured terrain data and on-board implemented terrain information. The navigation algorithm with Iterated Extended Kalman Filter(IEKF) can compensate for the navigation error, and provide precise navigation information compared to single INS. Simulation results are used to demonstrate the feasibility of integration to accomplish precise planetary landing. The proposed navigation approach can be implemented to the whole system coupled with guidance and control laws.