• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.265-269
• /
• 2003

최근 인공위성 영상자료는 주기적인 획득 시기를 가지고 있고 수치 지형도에 비해 쉽게 인지할 수 있기 때문에 지형변화 모니터링 분야에서 활발하게 이용되고 있다 그러나 인공위성 영상자료들은 촬영조건 및 센서의 특성에 따라 다른 기하학적인 왜곡을 포함하고 있을 뿐만 아니라 공간, 방사 및 분광 해상도가 상이하기 때문에 정밀한 분석 결과 산출에 어려움이 있다. 즉, 두 개 이상의 영상을 비교 분석하기 위해 기본적인 센서 정보의 차이에서 발생하는 정오차를 소거하고 지형기복에 의해 발생하는 부정오차를 제거하기 위한 정밀 기하보정은 반드시 선행되어야 한다. 따라서, 본 연구에서는 공간해상도가 다르기 때문에 발생하는 정오차 및 부정오차를 제거하기 위해 정밀정합을 실시하였다. 정밀 정합된 kompsat EOC 및 Landsat TM 영상으로 토지피복 변화를 탐지함으로써 위치정확도가 높은 탐지결과를 얻을 수 있었다. 정확한 위치정보를 가지는 탐지 결과는 지형지물의 갱신이나 다양한 GIS 응용의 기본자료로서 사용할 수 있을 것으로 기대된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.102-113
• /
• 2014

This paper suggests a novel hardware architecture of a real-time rectification which is to remove vertical parallax of an image occurred in the pre-processing stage of stereo matching. As an off-line step, Matlab Toolbox which was designed by J.Y Bouguet, was used to calculate calibration parameter of the image. Then, based on the Heikkila and Silven's algorithm, rectification hardware was designed. At this point, to enhance the precision of the rectified image, floating-point unit was generated by using Xilinx Core Generator. And, we confirmed that proposed hardware design had higher precision compared to other designs while having the ability to do rectification in real-time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.287-293
• /
• 2018

It is prerequisite to generate epipolar resampled images by reducing the y-parallax for accurate and efficient processing of satellite stereo images. Minimizing y-parallax requires the accurate sensor modeling that is carried out with ground control points. However, the approach is not feasible over inaccessible areas where control points cannot be easily acquired. For the case, a relative orientation can be utilized only with conjugate points, but its accuracy for satellite sensor should be studied because the sensor has different geometry compared to well-known frame type cameras. Therefore, we carried out the bias-compensation of RPCs (Rational Polynomial Coefficients) without any ground control points to study its precision and effects on the y-parallax in epipolar resampled images. The conjugate points were generated with stereo image matching with outlier removals. RPCs compensation was performed based on the affine and polynomial models. We analyzed the reprojection error of the compensated RPCs and the y-parallax in the resampled images. Experimental result showed one-pixel level of y-parallax for Kompsat-3 stereo data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.299-302
• /
• 2004

최근에 상용화되어 있는 영상 중 가장 고해상도인 ikonos 영상은 공간해상도가 높기 때문에 더 많은 지형지물 정보를 포함하고 있다. 그러나 이러한 커다란 장점과 더불어 고층건물이나 높은 표고의 지형에서 발생하는 기복변위 보정이라는 소축척 영상에서 볼 수 없었던 새로운 문제가 등장하였다. 특히, 이러한 고해상도 영상들은 산악지역에서 식생에 대한 세밀한 정보를 제공하지만 상대적으로 높은 고도를 가지고 있기 때문에 발생하는 기복왜곡과 그림자 효과가 자료의 이용에 제한요인으로 작용하게 된다. 본 연구에서는 ikonos 고유의 센서정보와 수치지형도를 통하여 획득한 DEM(수치표고모델)을 이용하여 정밀편위보정방법(Difference rectification method) 방법에 의해 기하보정을 수행하고 그 결과 발생하는 산악지역에서는 기복변위를 분석하였다.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2012

The stagnant growth in 3D market due to 3D movie contents shortage is encouraging development of techniques for production cost reduction. Elimination of vertical disparity generated during image acquisition requires heaviest time and effort in the whole stereoscopic film-making process. This matter is directly related to competitiveness in the market and is being dealt with as a very important task. The removal of vertical disparity, i.e. image rectification has been treated for a long time in the photogrammetry field. While computer vision methods are focused on fast processing and automation, photogrammetry methods on accuracy and precision. However, photogrammetric approaches have not been tried for the 3D film-making. In this paper, proposed is a photogrammetry-based rectification algorithm that enable to eliminate the vertical disparity precisely by reconstruction of geometric relationship at the time of shooting. Evaluation of proposed algorithm was carried out by comparing the performance with two existing computer vision algorithms. The epipolar constraint satisfaction, epipolar line accuracy and vertical disparity of result images were tested. As a result, the proposed algorithm showed excellent performance than the other algorithms in term of accuracy and precision, and also revealed robustness about position error of tie-points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.81-90
• /
• 2004

Because satellite images include geometry distortions according to photographing conditions and sensor property, and their spatial and radiational resolution and spectrum resolution are different, it is so difficult to make a precise results of analysis. For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased. The result of change detection using basic map could be used for basic data fur GIS application and topographical renovation.