• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1215-1217
• /
• 1992

This Paper described the hish performance position control for elevator using induction motor and driver. In this paper, the suitable Motor specifications for elevator drive are briefly discussed and high accuracy position control for both kinds of control method is analysed considering the parameter variation in the primary and secondary resistances. Since the pre-identified values of the motor constants are used to determine the control inputs, the performance degradation is caused by the parameter variation such as in the motor resistance. Particularly, the value of secondary resistance is considered significant because the control gain to determine the slip frequency is heavily dependent on that. The new proposed method uses on special small input signal for the parameter indentification and is expected to have the high accuracy position.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.330-333
• /
• 2003

In this thesis. the application of the synchronizing control of the intelligent indoor lift system is showed. The separate axes of the indoor lift system are driven independently. PID controller, synchronous flexible logic compensating method and tilt sensor are applied to enhance the performance of the intelligent indoor lift system. the tilt sensor senses the horizontal error of the whole system. PID controller and synchronous flexible logic are used to compensate the synchronous errors of both the separate axes and whole system to be zero. Namely, using not the hardware coupling but the software algorithm. the indoor life system is operated without the error. Before applying the real system, the simulation using matlab testifies the possibility of the lift system. And the realization of the system is demonstrated with two DC servo motors. In the experiment test, flexible logic to compensate the synchronous error is chosen by the comparative method. the indoor lift system has to be considered the loading factor as the disturbance. Because the intelligent indoor lift system is developed to support the patients who don't change for themselves to move. finally, the system which considers the weight of the patient as the disturbance can carry the patients safely without synchronous and position error.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.3
• /
• pp.181-190
• /
• 2015

This paper presents a new approach to control the position of robot arm in workspace a robot manipulator under unknown system parameters and bounded disturbance inputs. To control the motion of the manipulator, an inverse dynamics control scheme was applied. Since parameters of the robot arm such as mass and inertia are not perfectly known, the difference between the actual and estimated parameters was considered as a external disturbance force. To identify the known parameters, an improved robust control algorithm is directly derived from the Lyapunov's Second Method. A robust control algorithm is devised to counteract the bounded disturbance inputs such as contact forces and disturbing forces coming from the difference between the actual and the estimated system parameters. Numerical examples are shown using SCARA arm with four joints.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1681-1690
• /
• 2013

In this paper, a design of speed and position controller based on the EKF(Extended Kalman Filter) for sensorless control in IPMSM(Interior Permanent Magnet Synchronous Motor) is proposed. The proposed method subdivides the state estimation interval for improving the accuracy of state estimation. and each subdivided interval estimated first order term using Taylor series. The proposed state estimator comparison with the second-order extended Kalman filter reduced calculation amount of a priori estimation. And the simulation results were proved that The accuracy of priori estimation is increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.157-164
• /
• 2000

This paper presents a method to detect a rotor position and to drive a BLDC motor from standstill to medium speed without any position sensor comparing the current responses due to the inductance variation in the rotor position. A rotor position at a standstill is identified by the current responses of six pulses injected to each phase of a motor. Once the motor stars up pulse train that is composed of long and short pulses is injected to the phase corresponding to produce the maximum torque and the next phase continuously. it provides not only the torque but also the information of the next commutation time effectively when the response of long and short pulses crosses each other after the same time delay. This method which is verified experimentally using a DSP can drive a BLDC motor to the medium speed smoothly without any rattling and time delay compared with the conventional sensorless algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.976-979
• /
• 2005

This paper is about the development of automatic FPC(flexible printed circuit) punching instrument for the improvement of working condition and cost saving. FPC is used to detect the contact position of keyboard and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation Is done manually, the accuracy of the punching degree is varied with operator's condition. To improve this manual punch ing operation to the FPC, automatic FPC punching system is introduced. Test algorithms and programs showed good results to the designed automatic punching system and led to the increasement of productivity and huge cost down to law material like FPC by avoiding bad quality.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.58-62
• /
• 2016

In this paper, we propose a pre-processing scheme for improving indoor positioning accuracy in impulsive noise channel environments. The impulsive noise can be generated by multi-path fading effects by complicated indoor structures or interference environments, which causes an increase in demodulation error probability. The proposed pre-processing scheme is performed before a triangulation method to calculate user's position, and providing reliable input data demodulated from a received signal to the triangulation method. Therefore, we studied and proposed an adaptive threshold function for mitigation of the impulsive noise based on wavelet denoising. Through results of computer simulations for the proposed scheme, we confirmed that Bit Error Rate and Signal-to-Noise Ratio performance is improved compared to conventional schemes.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.151-160
• /
• 2010

For the realization of future intelligent transportation systems, fine-grained lane-by-lane traffic monitoring and control functionalities are among the most important technology barriers to overcome. To satisfy the accuracy requirement for traffic monitoring, a GNSS receiver network is designed. The designed receiver network consists of three different types of entities; reference server, broadcaster, and client. For deployment flexibility, all the entities utilize the international message standard RTCM SC-104 version 3.0. For fine-grained traffic monitoring, the client is designed to utilize position-domain carrier-smoothed-code filters to provide accurate vehicle coordinates in spite of frequent addages and outages of visible satellites. An experiment result is presented to evaluate the positioning accuracy of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.142-151
• /
• 1999

Linear Pulse Motors (LPM) are used a field where SImOth linear motion is required, and it's position accuracy higher than that of a lead According to the advanUlge such as simplicity of rrechanical frarre, high reliability, precise open-loop operation, low inertia etc. LPM is awlied largely where it have made motor of this kind more and rmre attractive in many application areas such as factory automation and high speed positioning. This paper is researched to analyze for force characteristics of hybrid LPM with high accuracy and repeatability. Both the thrust and normal force are very sensitive to the airgap and tooth pitches of the forcer and platen. Here, the thrust shows a high content while the normal force is much higher than the thrust. For magnetic circuits of hybrid LPM is the complicated structure, the finite element rrethod (FEM) is employed with suitable rrethod for calculating the force. Therefore, both the virtual work principle and maxwell stress tensor have been used.n used.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.5-5
• /
• 2017

방제 작업은 병해충을 줄여 농산물의 품질과 생산량을 높이기 위한 필수 작업이다. 하지만 방제 작업은 고온 다습한 환경에서 작업하여 고된 작업 강도와 농민의 농약 중독 문제, 고령화 여성화로 인한 농가 일손 부족 문제로 농촌에서는 기피하고 있는 작업 중 하나이다. 이러한 점을 보완하기 위해 동력 살포기와 같은 기계를 이용하여 살포 작업을 실시하고 있으며, 스피드 스프레이어의 경우 2015년 기준 2,073 대가 농가에 공급되어졌다. 스피드 스프레이어를 사용하는 농가는 점차 증가하고 있으나, 현재 스피드 스프레이어의 살포 방식의 경우 농약을 다량 살포함으로써, 농약의 낭비, 환경오염의 문제점이 나타나고 있다. 이러한 점을 보완하기 위해 최근에는 방제 작업의 방식이 붐을 이용한 방제 작업으로 바뀌어가고 있는 추세이다. 붐 방제기의 경우 붐에 노즐을 배치하여 작물에 근접한 위치에서 농약을 정밀 살포하며, 스피드 스프레이어와 다르게 농약의 낭비를 줄일 수 있으며, 농약의 살포량을 제어하기 쉬운 장점이 있다. 본 연구에서는 기존의 트랙터 부착형 붐 방제기가 아닌 스피드 스프레이어를 개선한 붐식 스피드 스프레이어를 개발하기 위하여 현재 사용되고 있는 붐 방제기의 연구 동향 및 제품을 소개하고 개발에 필요한 기초 자료로 활용하고자 한다. 기존의 붐 방제기는 트랙터에 부착하는 형태로 개발되어졌으며 트랙터의 부착위치에 따라 전륜, 후륜형으로 나뉘고, 작물의 크기에 따라서 붐의 높이 및 붐의 각도를 조절하는 구조로 제작하여 사용되고 있다.