• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.173-178
• /
• 2001

제품 및 환경에 대한 감성평가를 위한 한국인 체형에 맞는 인체모델을 개발하기 위해 인체측정자료를 수집 및 분석한다. 분석된 인체측정 자료를 이용하여 15개의 지체와 14개의 조인트로 구성된 인체모델을 구성하고 기구학적 특성 값을 기술한다. 구성된 인체모델은 3차원 그래픽 기술을 통해 가시화하며, 가상현실 상에서 제품 및 환경과 상호 작용하도록 구성함으로써 감성평가가 가능하도록 구성한다. 정면충돌 상황시의 각 지체의 거동을 분석하고 국제 인체모델과 비교함으로써 동역학적으로 인체모델이 타당한지를 평가한다. 가상환경에서 차량 내부의 감성평가에 인체모델을 이용한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.178-188
• /
• 2019

When using a distributed system, it is very important to know the intention of a target ship in order to prevent collisions. The action taken by a certain ship for collision avoidance and the action of the target ship it intends to avoid influence each other. However, it is difficult to establish a collision avoidance plan in consideration of multiple-ship situations for this reason. To solve this problem, a Distributed Stochastic Search Algorithm (DSSA) has been proposed. A DSSA searches for a course that can most reduce cost through repeated information exchange with target ships, and then indicates whether the current course should be maintained or a new course should be chosen according to probability and constraints. However, it has not been proven how the parameters used in DSSA affect collision avoidance actions. Therefore, in this paper, I have investigated the effect of the parameters and weight factors of DSSA. Experiments were conducted by combining parameters (time window, safe domain, detection range) and weight factors for encounters of two ships in head-on, crossing, and overtaking situations. A total of 24,000 experiments were conducted: 8,000 iterations for each situation. As a result, no collision occurred in any experiment conducted using DSSA. Costs have been shown to increase if a ship gives a large weight to its destination, i.e., takes selfish behavior. The more lasting the expected position of the target ship, the smaller the sailing distance and the number of message exchanges. The larger the detection range, the safer the interaction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.195-203
• /
• 2009

This research wished to risk type and examine closely driver special quality and relation of traffic accidents by occurrence type of traffic accidents and traffic accidents seriousness examine closely relation with Severity. Fractionate traffic accidents type by eight, and driver's special quality for risk group's classification did to distinction of sex, vehicle type, age etc. analyzed relation with injury degree adding belt used putting on availability for security the objectivity with wave. Used log-Linear model and Logit model for analysis of category data. A head-on collision and overtaking accident, right-turn accident are high injury or death accident and possibility to associate in relation with accident type and seriousness degree. In risk group analysis The age less than 20 years in motor-cycle driver, taxi driver in 41 years to 50 years old are very dangerous. The woman also was construed to the more risk group than man from when related to car, mini-bus, goods vehicle etc. Therefore, traffic safety education and Enforcement for risk group that way that can reduce accident that produce to reduce a loss of lives at traffic accidents appearance a head-on collision and overtaking accidents, right-turn accidents should be studied and as traffic accidents weakness class may have to be solidified.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.45-60
• /
• 2003

A median is a safety feature most commonly used to separate opposing traffic on a divided highway. In designing highways, the selection and installation of a median can be a critical part from a safety viewpoint because road crossing accidents are definitely more serious than other accidents. In regard to the important function of the median. the proper countermeasure ought to have been provided and thorough study should have been carried out. In this paper, traffic accident data are analyzed to examine the accident reduction effect of the median, which are gathered from all over 4-lane national roads in Korea. The traffic accident data were categorized into two groups by the existence of a median. For more effective analysis, the data have been classified by accident type, severity. and occurrence time. To compare the effectiveness of median installation, not only the accident frequency but also the accident severity, EPDO. and the occupancy rate of specific accidents have been used as a mode of effectiveness. The analysis of the effectiveness of medians shows that both the accident frequency and the accident severity could decrease by providing a median. Also the section where a median was supplied showed the improvement of overall safety through fewer serious and fatal crashes as well as fewer head-on crashes. Therefore, conclusions can be drawn from results of this study that the median installation is an important means to increase the safety of over 4-lane national roads. This study is expected to provide the reasonability of the median installation by identifying the reduction of traffic accident after the median installation and to play a major role in selecting sections where the median is to be offered.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.7-12
• /
• 2018

Injury mechanisms of lower extremity injuries in motor vehicle accidents are focused on fractures, sprains, and contusions. The purpose of this study is to evaluate the analysis of lower extremity injury mechanism in occupant motor vehicle accident by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 1,699 patients due to motor vehicle crashes, 88 (5.2%) received a diagnosis of lower extremity fracture and 141 (8.3%) were the severe who had ISS over 15. Nevertheless during 19 months for research, it was difficult to build up in-depth database about motor vehicle crashes. It has a limitation on collecting data because not only the system for constructing database about motor vehicle crash is not organized but also the process for demanding materials is not available due to prevention of personal information. For accurate analysis of the relationship between occupant injury and vehicle damage in motor vehicle crashes, build-up of an in-depth database through carrying out various policies for motor vehicle crashes is necessary for sure.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.33-46
• /
• 2008

A two-lane highway has a high rate of head-on collisions, sideswipe collisions, crashes with an fixed object. This study was to analyze the weakness of a cross section and a horizontal curve in a two-lane highway and find countermeasures to improve the traffic operations and safety. This study evaluated the effectiveness of widening, curve flattening and superelevation, verified it with a case study and assessed the economical efficiency. This study selected the difference between tangent section operating speeds and curve section operating speeds as an evaluation index of horizontal curve section in a two-lane highway. The results indicated that curve flattening is the best way to improve the traffic safety in a two-lane highway. This study has implication that it provides the quantitative effects of curve flattening. Also directions for future study were discussed.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.32-37
• /
• 2018

Recently, the driver can be assisted by the advanced active safety devices such as ADAS from road traffic risks. With this system, driver and passenger may freed from can driving tasks or kept eyes on forward direction while on the road. Help from adoptive cruise control, auto parking and newly develped automated driving vehicles technologies, the driver positions will vary significantly from the current standard driver position during the travel time. On this hypothesis, the objective of this study is analyze the behavior and injuries of drivers in the event of frontal impact under these abnormal driver position. Based on the KNCAP frontal impact testing method, this simulation matrix was set-up with dummies of 5 th tile female Hybrid III dummy and 50 th tile male Hybrid III dummy. The small sedan type passenger car was modeled in this simulation. The series of simulation was performed to compare the injuries and behaviour of each dummy, varying the seating status and seat position of each dummy.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.226-232
• /
• 2000

This paper develops a finite element model for studying the crashworthiness analysis of a mid-size truck. A simulation for a truck frontal crash to a rigid barrier using the model is performed with PAM-CRASH installed in super computer SP2. Full vehicle model is composed of 86467 shell elements, 165 beam elements and 98 bar elements, and 86769 nodes. The model uses four material model such as elastic, elastic-plastic(steel), rigid and elastic-plastic(rubber) material model which are in PAM-CRASH. Frame and suspension system are modeled with 28774 shell elements and 31412 nodes. Cab is modeled with 34680 shell elements and 57 beam elements, and 36254 nodes. Bumper is modeled with 2262 shell elements, and 2508 nodes. Axle, steering shaft, etc are modeled using beam or bar elements. Mounting parts are modeled using rigid bodies. Bodies are interconnected using nodal constrains or joint options. To verify the developed model, frontal crash test with 30mph velocity to a rigid barrier is carried out. In the crash test, vehicle pulse at lower part of b-pillar is measured, and deformed shapes of frame and driver seat area are photographed. Those measured vehicle pulse and photographed pictures are compared those from the simulation to verify the developed finite element model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.201-209
• /
• 2003

Virtual human models are widely used to save time and expense in vehicle safety studies. A human model is an essential tool to visualize and simulate a vehicle driver in virtual environments. This research is focused on creation and application of a human model fer virtual reality. The Korean anthropometric data published are selected to determine basic human model dimensions. These data are applied to GEBOD, a human body data generation program, which computes the body segment geometry, mass properties, joints locations and mechanical properties. The human model was constituted using MADYMO based on data from GEBOD. Frontal crash and bump passing test were simulated and the driver's motion data calculated were transmitted into the virtual environment. The human model was organized into scene graphs and its motion was visualized by virtual reality techniques including OpenGL Performer. The human model can be controlled by an arm master to test driver's behavior in the virtual environment.