• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.20-30
• /
• 1979

The purpose of present study is to analyze the genetic variation of natural stand of Pinus densiflora. In 1976 following after the seletion of 1974 and 1975, twenty trees from each of three natural populations of the species were selected and seeds were collected, and the locations and conditions of populations are presented in table 1, 2 and figure 1. Some morphological traits of the populations were already detailed in our fifth report of this series. The morphological traits of cone, seed and seed-wing, and also the growth performances and needle characters of the seedling were observed in the present study according to the previous methods. The results obtained are summarized as follows; 1. The meteorological data obtained by averaging the records of 30 year period(1931~1960) measured from the nearest meteorological station to each population are shown in fig. 2, 3, 4. The distributional patterns of investigated climate factors are generally considered to be similar among the locations. However, the precipitation density during growing season and the air temperature during dormant season on Samchuk area (Pop. 9) were quite different from those of the other areas. 2. The measurements of fresh cone weight, length, diameter and cone index (i.e.: length to diameter ratio) are presented in table 7. As shown in table 7, all these traits except for cone diameter seem to be not significant in population and to be highly significant in family differences within population. 3. The morohological traits of seed and seed-wing are detailed in table 8, 9, and highly significant differences are recognized among the populations and the families within population in seed weight, seed length, seed thickness but not among the populations in the other observed traits. The values of correlation between the characteristics of cone and seed are presented in table 12. As shown, the correlation between cone length and seed wing length, between seed wing width and seed width were significantly positive in population 8 and 9 but in population 7. The positive correlations between seed length and seed width were calculated in all populations studied 4. Significant statistical differences among populations and families within population are observed in the growth performances of 1-0 seedling height of these progenies. But the differences in 1-1 seedling height and root collar diameter are shown only among familes within population. As shown in table 13, the most parts of correlations are not significant statistically between the growth performances of seedling and the seed characters. 5. As shown in table 15, statistical differences are considered to be significant among the populations in stomata row on both sides of the needle but not in serration density. The correlations between progenies and parents are not generally observed in the investigated traits of needle as shown in table 16.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.4
• /
• pp.267-283
• /
• 2003

This study reviewed the prisoners' dietary lift status under the world panics and Japanese food shortage based on the data of the 1920~1930's prisons' main dish supplies in Chosun, Shinchu boys' prison in Taiwan, Franue correction center in France and Moabit detention house in Germany. 1. The status of main dish food supply of Chosun prisons in 1920~1930's was as follows: 1) Meals were provided with 12 rates depending on the working activities. There were big differences in energy supply between 1$^{st}$ rate of 6045.0 ㎉ in the Mockpo prison and 12$^{th}$ rate of 1855.8 ㎉ in the Masan prison in accordance with the grain supply ratio and the diet rates. 2) The average ratio of energy provided with protein, fat and carbohydrate(PFC ratio) was 20.0: 20.2: 59.8. The supplies of protein and fat were relatively high because main dish was mostly composed of soybean. The soybean was used in 20 ~60％ of main dish in prisons except Gaesung. 3) It was estimated that PFC ratio(8.3: 8.1 : 83.6) in Gaesung boys' prison was not appropriate for growing boys because the soybean supply was low. 2. The overall comparison of nutrition supply of prisons in Chosun, Taiwan, France and Germany was as follows: 1) The daily supplies of energy in Keongsung prison was 3966.5 ㎉, of which the PFC ratio was 18.9: 16.6: 64.5. This showed that the PFC ratio seemed to be balanced, even though the total amount of energy is too high and the ratios of protein and fat were somewhat high and somewhat low, respectively. 2) The main dish of the Taiwan boys' prison was provided with 6 rates and the side dish in the from of weekly cycle menu. The energy intakes from 1$^{st}$ rate of 2862.9 ㎉ to 6$^{th}$ rate of 1388.9 ㎉ were not quite enough for growing boys. It was estimated that the amounts of protein and fat taken were small but the quality was not that bad because animal protein such as protein small fish and fried tofu were supplied. 3) In the French Frenue correction center and the German Moabit detention house, the daily total amounts of energy were 2771.3 ㎉ and 2678.7 ㎉, respectively, which was estimated as appropriate compared with standard energy amount of 3000 ㎉ at that time and the current energy RDA of 2500 ㎉ for adult. The ratio of PFC was 16.2: 12.0: 71.8 in Frenue correction center and 12.4: 14.3: 73.3 in Moabit detention house, which showed that the amount of fat was slightly lacked. From this study, it was suggested that the prisons in Chosun and Taiwan under the Japanese rule and European prisons after the world panic were making an efforts to supply prisoners the appropriate amount of energy. The only question remains is that this data may be from only the food supply plan not from the data the prisoners took in real.eal.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.116-128
• /
• 2000

The purpose of this study is to analyze the nutrient intakes and growth development of rural middle school students provided with and without the national school lunch program(NSLP). The subjects consisted of 340 rural middle school students provided with(n=177) and without(n=163) NSLP. Anthropometric measurements were taken for body weight, height, triceps skinfold thickness and percentage of body fat, and nutrient intakes were assessed by food record method. The results of this study were summarized as follows: There was no significant difference in the height, body weight girls provided with (155.8cm 47.2kg) and without (156.0cm, 49.7kg) NSLP. Total energy intakes of boys were 2123kca1 in with NSLP and 1857kca1 in without NSLP. Total energy intakes of girls were 1913kca1 in with NSLP and 1814kca1 in without NSLP. Total daily energy was provided in the ratio of 19.1%, 39.8%, 32.4% and 8.7% by breakfast, lunch, dinner and snacks in the with NSLP and 17.5%, 32.0%, 34.8% and 15.7% in without NSLP, respectively. Phosphorus, vitamin A, vitamin E, ascorbic acid, thiamin, riboflavin, niacin intakes were above the RDA in with NSLP. In without NSLP, phosphorus, vitamin E, thiamin intakes were above the RDA. however, calcium. iron, vitamin A, vitamin B$_{6}$ were less than the RDA. The study showed that total daily energy and nutrient intakes were significantly higher in students provided with than without school-lunch. Thus, the school-lunch program is recommended and necessary to improve the nutritional status of middle school students.

• Journal of the Korean Chemical Society
• /
• v.43 no.4
• /
• pp.384-385
• /
• 1999

Two anhydrous crystal structures of fully dehydrated, $Ca^{2+}$- and $Tl^+$-exchanged zeolite X, TEX>$Ca_{18}Tl_{56}Si_{100}Al_{92}O_{384}($Ca_{18}Tl_{56}$-X;\alpha=24.883(4)\AA)$ and TEX>$Ca_{32}Tl_{28}Si_{100}Al_{92}O_{384}($Ca_{32}Tl_{28}$-X;\alpha=24.973(4)\AA)$ per unit cell, have been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd3 at $21(1)^{\circ}C.$ $Ca_{18}Tl_{56}-X$ was prepared by ion exchange in a flowing stream of 0.045 M aqueous $Ca(NO_3)_2$ and 0.005 M $TlNO_3$. $Ca_{32}Tl_{28}-X$ was prepared similarly using a mixed solution of 0.0495 M $Ca(NO_3)_2$ and 0.0005M $TlNO_3$. Each crystal was then dehydrated at 360 $^{\circ}C$ and $2{\times}10^{-6}$ Torr for 2 days. Their structures were refined to the final error indices, $R_1=0.039\;and\;R_2=0.036$ with 382 reflections for $Ca_{18}Tl_{56}-X$ , and $R_1=0.046\;and\;R_2=0.045$ with 472 reflections for $Ca_{32}Tl_{28}$-X for which $/>3\sigma(I).$ In the structures of dehydrated $Ca_{18}Tl_{56^-}X\;and\;Ca_{32}Tl_{28}$-X, $Ca^{2+}\;and\;Tl^+$ ions are located at six crystallographic sites. Sixteen $Ca^{2+}$ ions fill the octahedral sites I at the centers of double six rings ($Ca_{18}Tl_{56}$-X:Ca-O=2.42(1) and O-Ca-O=93.06(4)$^{\circ}$; $Ca_{32}Tl_{28}$-X Ca-O=2.40(1) $\AA$ and O-Ca-O=93.08(3)$^{\circ}$). In the structure of $Ca_{18}Tl_{56}$-X, another two $Ca^{2+}$ ions occupy site II (Ca-O=2.35(2) $\AA$ and O-Ca-O=111.69(2)$^{\circ}$) and twenty six $Tl^+$ ions occupy site II opposite single six-rings in the supercage; each is 1.493 $\AA$ from the plane of three oxygens $(Tl-O=2.70(8)\AA$ and O-Tl-O=92.33(4)$^{\circ}$). About four $Tl^+$ ions are found at site II',1.695 $\AA$ into sodalite cavity from their three oxygen plane (Tl-O=2.81 (1) and O-Tl-O=87.48(3)). The remaining twenty six $Tl^+$ ions are distributed over site III'(Tl-O=2.82 (1) $\AA$ and Tl-O=2.88(3)$^{\circ}$). In the structure of $Ca_{32}Tl_{28}$-X, sixteen $Ca^{2+}$ ions and fifteen $Tl^+$ ions occupy site III' (Ca-O=2.26(1) $\AA$ and O-Ca-O=119.14(4)$^{\circ}$; Tl-O=2.70(1) $\AA$ and O-Tl-O=92.38$^{\circ}$) and one $Tl^+$ ion occupies site II'. The remaining twelve $Tl^+$ ions are distributed over site III'. It appears that $Ca^{2+}$ ions prefer sites I and II in that order and $Tl^+$ ions occupy the remaining sites.

• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.25-38
• /
• 2001

The purpose of this study was to compare the force, the displacement and the stress distribution on the maxillary first molars altered by the application of various asymmetric head-gear. For this study, the finite element models of unilateral Cl II maxillary dental arch was made. Also, the finite element models of asymmetric face-bow was made. Three types of asymmetric face-bow were made : each of the right side 15mm, 25mm and 35mm shorter than the left side. We compared the forces, the displacement and the distribution of stress that were generated by application of various asymmetric head-gear, The results were as follows. 1. The total forces that both maxillary first molars received were similar in all groups. But the forces that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow shortened. 2. In lateral force comparison, the buccal forces that normally positioned tooth received were increased as the length of the outer-bow shortened, and the buccal fortes that mesially positioned tooth received were decreased as the length of the outer-bow shortened. Though the net lateral force moved to the buccal side of normally positioned tooth as the length of the outer-bow shortened, both maxillary first molars received the buccal force. That showed 'Avchiai Expansion Effect' 3. The distal forces, the extrusion forces and the magnitudes of the crown distal tipping that mesially positioned tooth received were increased as the length of the outer-bow shortened, and the forces that normally positioned tooth received were decreased as the length of the outer-bow was shortened. 4. The magnitude of the distal-in rotation that normally positioned tooth received were increased as the length of the outer-bow was shortened. But, mesially positioned tooth show two different results. For the outer-bow 15mm shortened, mesially positioned tooth showed the distal-in rotation, hut for the outer-bow 25mm and 35mn shortened, mesially positioned tooth showed the distal-out rotation. Thus, the turning point exists between 15mm and 25mm. 5. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the compressive stress in the distobuccal root of the normally positioned tooth moved from the palatal side to the distal side and the buccal side successively as the length of the outer-bow shortened. 6. This study of the initial stress distribution of the periodontal ligament at slightly inferior of the furcation area revealed that the magnitudes of stress were altered but the total stress distributions were not altered in the mesiobuccal root and the palatal root of normally positioned tooth, and also three roots of mesially positioned tooth as the length of the outer-bow shortened.

• Journal of Periodontal and Implant Science
• /
• v.23 no.3
• /
• pp.535-563
• /
• 1993

New techniques for regenerating the destructed periodontal tissue have been studied for many years. Current acceptable methods of promoting periodontal regeneration alre basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, biological mediators. Platelet-derived growth factor (PDGF) is one of polypeptide growth factor. PDGF have been reported as a biological mediator which regulate activities of wound healing progress including cell proliferation, migration, and metabolism. The purposes of this study is to evaluate the possibility of using the PDGF as a regeneration promoting agent for furcation involvement defect. Eight adult mongrel dogs were used in this experiment. The dogs were anesthetized with Pentobarbital Sodium (25-30 mg/kg of body weight, Tokyo chemical Co., Japan) and conventional periodontal prophylaxis were performed with ultrasonic scaler. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree III furcation defect was made on mandibular second(P2) and fourth(P4) premolar. For the basic treatment of root surface, fully saturated citric acid was applied on the exposed root surface for 3 minutes. On the right P4 20ug of human recombinant PDGF-BB dissolved in acetic acid was applied with polypropylene autopipette. On the left P2 and right P2 PDGF-BB was applied after insertion of ${\beta}-Tricalcium$ phosphate(TCP) and collagen (Collatape) respectively. Left mandibular P4 was used as control. Systemic antibiotics (Penicillin-G benzathine and penicillin-G procaine, 1 ml per 10-25 1bs body weight) were administrated intramuscular for 2 weeks after surgery. Irrigation with 0.1% Chlorhexidine Gluconate around operated sites was performed during the whole experimental period except one day immediate after surgery. Soft diets were fed through the whole experiment period. After 2, 4, 8, 12 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. At 2 weeks after surgery, therer were rapid osteogenesis phenomenon on the defected area of the PDGF only treated group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 8 weeks after surgery. New cementum fromation was observed from 2 weeks after surgery, and the thickness was increased until 8 weeks with typical Sharpey’s fibers reembedded into new bone and cementum. In both PDGF-BB with TCP group and PDGF-BB with Collagen group, regeneration process including new bone and new cementum formation and the group especially in the early weeks. It might be thought that the migration of actively proliferating cells was prohibited by the graft materials. In conclusion, platelet-derived growth factor can promote rapid osteogenesis during early stage of periodontal tissue regeneration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.365-375
• /
• 2009

Statement of problems: Stress analysis on implant components of the combined screw- and cement-retained implant prosthesis has not investigated yet. Purpose: The purpose of this study was to assess the load distribution characteristics of implant prostheses with the different prosthodontic retention types, such as cement-type, screw-type and combined type by using 3-dimensional finite element analysis. Material and methods: A 3-dimensional finite element model was created in which two SS II implants (Osstem Co. Ltd.) were placed in the areas of the first premolar and the first molar in the mandible, and three-unit fixed partial dentures with four different retention types were fabricated on the two SS II implants. Model 1 was a cement-retained implant restoration made on two cement-retained type abutments (Comocta abutment; Osstem Co. Ltd.), and Model 2 was a screw-retained implant restoration made on the screw-retained type abutments (Octa abutment; Osstem Co. Ltd.). Model 3 was a combined type implant restoration made on the cement-retained type abutment (Comocta abutment) for the first molar and the screw-retained type abutment (Octa abutment) for the first premolar. Lastly, Model 4 was a combined type implant restoration made on the screw-retained type abutment (Octa abutment) for the first molar and the cement-retained type abutment (Comocta abutment) for the first premolar. Average masticatory force was applied on the central fossa in a vertical direction, and on the buccal cusp in a vertical and oblique direction for each model. Von-Mises stress patterns on alveolar bone, implant body, abutment, abutment screw, and prosthetic screw around implant prostheses were evaluated through 3-dimensional finite element analysis. Results: Model 2 showed the lowest von Mises stress. In all models, the von Mises stress distribution of cortical bone, cancellous bone and implant body showed the similar pattern. Regardless of loading conditions and type of abutment system, the stress of bone was concentrated on the cortical bone. The von-Mises stress on abutment, abutment screw, and prosthetic screw showed the lower values for the screw-retained type abutment than for the cement-retained type abutment regardless of the model type. There was little reciprocal effect of the abutment system between the molar and the premolar position. For all models, buccal cusp oblique loading caused the largest stress, followed by buccal cusp vertical loading and center vertical loading. Conclusion: Within the limitation of the FEA study, the combined type implant prosthesis did not demonstrate more stress around implant components than the cement type implant prosthesis. Under the assumption of ideal passive fit, the screw-type implant prosthesis showed the east stress around implant components.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.67-92
• /
• 2008

The purpose of this paper is to research the requirements and effect of the document of carriage in respect of the carriage of cargo by air under the Montreal Convention of 1999, IATA Conditions of Carriage for Cargo, and the judicial precedents of Korea and foreign countries. Under the Article 4 of Montreal Convention, in respect of the carriage of cargo, an air waybill shall be delivered. If any other means which preserves a record of the carriage are used, the carrier shall, if so requested by the consignor, deliver to the consignor a cargo receipt. Under the Article 7 of Montreal convention, the air waybill shall be made out by the consignor. If, at the request of the consignor, the carrier makes it out, the carrier shall be deemed to have done so on behalf of the consignor. The air waybill shall be made out in three original parts. The first part shall be marked "for the carrier", and shall be signed by the consignor. The second part shall be marked "for the consignee", and shall be signed by the consignor and by the carrier. The third part shall be signed by the carrier who shall hand it to the consignor after the goods have been accepted. Under the Article 5 of Montreal Convention, the air waybill or the cargo receipt shall include (a) an indication of the places of departure and destination, (b) an indication of at least one agreed stopping place, (c) an indication of the weight of the consignment. Under the Article 10 of Montreal Convention, the consignor shall indemnify the carrier against all damages suffered by the carrier or any other person to whom the carrier is liable, by reason of the irregularity, incorrectness or incompleteness of the particulars and statement furnished by the consignor or on its behalf. Under the Article 9 of Montreal Convention, non-compliance with the Article 4 to 8 of Montreal Convention shall not affect the existence of the validity of the contract, which shall be subject to the rules of Montreal Convention including those relating to limitation of liability. The air waybill is not a document of title or negotiable instrument. Under the Article 11 of Montreal Convention, the air waybill or cargo receipt is prima facie evidence of the conclusion of the contract, of the acceptance of the cargo and of the conditions of carriage. Under the Article 12 of Montreal Convention, if the carrier carries out the instructions of the consignor for the disposition of the cargo without requiring the production of the part of the air waybill or the cargo receipt, the carrier will be liable, for any damage which may be accused thereby to any person who is lawfully in possession of that part of the air waybill or the cargo receipt. According to the precedent of Korea Supreme Court sentenced on 22 July 2004, the freight forwarder as carrier was not liable for the illegal delivery of cargo to the notify party (actual importer) on the air waybill by the operator of the bonded warehouse because the freighter did not designate the boned warehouse and did not hold the position of employer to the operator of the bonded warehouse. In conclusion, as the Korea Customs Authorities will drive the e-Freight project for the carriage of cargo by air, the carrier and freight forwarder should pay attention to the requirements and legal effect of the electronic documentation of the carriage of cargo by air.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.6
• /
• pp.932-943
• /
• 2000

Background : Nonspecific interstitial pneumonitis (NSIP) is most likely to be confused with usual interstitial pneumonitis (UIP). Unlike patients witþ UIP, the majority of patients with NSIP have a good prognosis, with most patients improving after treatment with corticosteroids. Therefore it is clinically important to differentiate NSIP from UIP. Up to now, the only means of differentiating these two diseases was by means of surgical lung biopsy. American Thoracic Society (ATS) proposed a clinical diagnostic criteria for UIP to provide assistance to clinicians in its diagnosis without surgical lung biopsy. This study is aimed to investigate whether there were clinical and radiological differences between NSIP and UIP, and the usefulness of ATS clinical diagnostic criteria for UIP in Korea. Methods : We studied 60 patients with UIP and NSIP confirmed by surgical lung biopsy. Clinical manifestations, pulmonary function test, arterial blood gas analysis, bronchoalveolar lavage (BAL), and high resolution computed tomography (HRCT) were evaluated and analyzed by Chi-square test or t-test. The clinical criteria for UIP proposed by ATS were applied to all patients with idiopathic interstitial pneumonia. Results : Forty-two patients with UIP and 18 with NSIP were pathologically identified. Among the 18 patients with NSIP (M : F=1 : 17), the mean age was 55.2$\pm$8.4 (44~73) yr. Among the 42 patients with UIP (M : F=33 : 9), the mean age was 59.5$\pm$7.1 (45~74) yr (p=0.046). Fever was more frequent in NSIP (39%) (p=0.034), but clubbing was frequently observed in UIP (33%) (p=0.023). BAL lymphocytosis was more frequent (23%) (p=0.0001) and CD4/CD8 ratio was lower in NSIP (p=0.045). On HRCT, UIP frequently showed honeycomb appearance (36 of 42 patients) though not in NSIP (p=0.0001). Six of 42 UIP patients (14.3%) met the ATS clinical criteria for IPF, and 3 of 16 NSIP patients (18.8%) met the diagnostic criteria. Conclusion : Being a relatively young female and having short duration of illness, fever, BAL lymphocytosis, low CD4/CD8 ratio with the absence of clubbing and honeycomb appearance in HRCT increase the likelihood of the illness being NSIP. The usefulness of ATS clinical diagnostic criteria for UIP may be low in Korea.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1252-1264
• /
• 1998

Background : Patients with established ARDS have a mortality rate that exceeds 50 percent despite of intensive care including artificial ventilation modality, Mortality has been associated with sepsis and organ failure preceding or following ARDS ; APACHE II score ; old age and predisposing factors. Revised ventilator strategy over last 10 years especially at ARDS appeared to improve the mortality of it. We retrospectively investigated 40 ARDS patients of respiratory-care unit to examine how these factors influence outcome. Methods : A retrospective investigation of 40 ARDS patients in respiratory-care unit with ventilator management over 46 months was performed. We investigated the clinical characteristics such as a risk factor, cause of death and mortality, and also parameters such as APACHE II score, number of organ dysfunction, and hypoxia score (HS, $PaO_2/FIO_2$) at day 1, 3, 7 of severe acute lung injury, and simultaneously the PEEP level and tidal volume. Results : Clinical conditions associated with ARDS were sepsis 50%, pneumonia 30%, aspiration pneumonia 20%, and mortality rate based on the etiology of ARDS was sepsis 50%, pneumonia 67%(p<0.01 vs sepsis), aspiration pneumonia 38%. Overall mortality rate was 60%. In 28 day-nonsurvivors, leading cause of death was severe sepsis(42.9%) followed by MOF(28.6%), respiratory failure(19.1 %), and others(9.5%). There were no differences in variables of age, sex, APACHE II score, HS, and numbers of organ dysfunction at day 1 of ARDS between 28-days survivor and nonsurvivors. In view of categorized variables of age(>70), APACHE II score(>26), HS(<150) at day 1 of ARDS, there were significant differences between 28-days survivor and nonsurvivors(p<0.05). After day 1 of ARDS, the survivors have improved their APACHE II score, HS, numbers of organ dysfunction over the first 3d to 7d, but nonsurvivors did not improve over a seven-day course. There were significant differences in APACHE II score and numbers of organ dysfunction of day 3, 7 of ARDS, and HS of day 7 of ARDS between survivors and nonsurvivors(p<0.05). Fatality rate of ARDS has been declined from 68% to less than 40% between 1995 and 1998. There were no differences in APACHE II score, HS, numbers of organ dysfunction, old age at presentation of ARDS. In last years, mean PEEP level was significantly higher and mean tidal volume was significantly lower than previous years during seven days of ARDS(p<0.01). Conclusions : Improvement of HS, APACHE II score, organ dysfunction over the first 3d to 7d is associated with increased survival Decline in ARDS fatality rates between 1995 and 1998 seems that this trend must be attributed to improved supportive therapy including at least high PEEP instead of conventional-least PEEP approach in ventilator management of acute respiratory distress syndrome.