• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.2
• /
• pp.65-69
• /
• 2017

AlN single crystal was thermally treated at 1600, 1700 and $1800^{\circ}C$ in the ambient pressure of under 100 torr. AlN single crystal was obtained by PVT (Physial Vapor Transport) method using by a facility having a growth part which was heated by RF (Radio Frequency) induction heating. The single crystal specimens surface was evaluated by optical microscope and it was recognized that their morphology was varied with the heat treatment temperature and a set ambient pressure. In this report, the optical microscopic results were reported. According to the increase of temperature the crystal surface was etched thermally. It was evaluated by appearance of small pits on the crystal surface.

• Geotechnical Engineering
• /
• v.4 no.3
• /
• pp.35-42
• /
• 1988

A series of consolidated-undrained cubical triaxial tests was performed to investigate the three- dimensional strength characteristics of anisotropic overconsolidated clay. All specimens sampled in field were loaded under conditions of principal stress directions fixed and aligned with the directions during sampling. A sufficient number of tests It was performed to deter.mine the three- dimensional failure surface in the octahedral plane. The adjusted effective friction angles obtained by the stress state projected on the same octahedral plane did not show anisotropy, while the measured effective friction angles showed considerally difference according to the axes of speccimens. Therefore, Lade failure criterion proposed fort isotropic materials could be also used practically for anisotropic overconsolidated clay. The direction of the plastic strain increment wrectors superimposed on the principal stress space was nearly perpendicular to the traces of the failure surface in the octahedral plane.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.528-535
• /
• 1997

$LiTaO_3$ single crystals of congruently melting composition were grown by the halogen lamp type floating zone system. Calcination and sintering parameters for the growth were established. Optimum crystal growth conditions were investigated by a controlling of growth rates, rotation speeds and atmospheres. Based on the melting aspect and the shape of molten zone, stable conditions could not be found in air or Na atmosphere. However the growth stability in Ar atmosphere was more regular than that in air or $N_2$. The grown crystals were characterized using Laue back reflection, Curie temperature, refractive index and transmittance. Curie temperature fluctuation in the section of the grown crystal part of top, body and tail was $1^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.474-478
• /
• 2001

Transglutaminase(TGase) 첨가가 튀긴 어묵의 레올로지 특성에 미치는 영향이 평가되었다. 최적의 TGase 함량과 setting시간은 저온$(25^{\circ}C)$ setting에서는 0.1%와 180분이었고, 고온$(40^{\circ}C)$ setting에서는 0.3%와 80분으로 각각 결정되었다. 각각의 최적조건에서의 겔 강도는 $25^{\circ}C$에서는 TGase를 첨가한 겔이 첨가하지 않은 겔보다 최대 750(g cm)도 증가했으며, $40^{\circ}C$에서는 약 800(g cm)정도의 증가를 보여주었다. 동적 점탄성의 setting 측정 결과로부터 TGase 첨가 시료는 $25^{\circ}C$인 경우 G#과 G@ 값이 각각 1.0 kPa과 0.5 kPa 정도 증가하는 것으로 나타났으며, $40^{\circ}C$ 경우는 G#과 G@ 값이 각각 15 kPa과 2.2 kPa 정도 증가함을 보여 주었다. 동적 점탄성의 가열-냉각 측정 결과에서도 $25^{\circ}C$와 $40^{\circ}C$ setting 모두에서 G#, G@ 값이 $5{\sim}15\;kPa$ 정도 증가함을 나타났다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.92-96
• /
• 2004

본 연구에서는 지하수위 변동 분석을 위한 프로그램을 개발하고, 건설교통부에서 설치, 운영하고 있는 169개 국가 지하수 관측소의 264개 지하수관측정에서 측정된 지하수위자료에 적용하였다. 분석결과 암반대수층과 충적층대수층의 평균수위 및 변동양상이 대체적으로 비슷하게 나타났으며, 이는 관측소 설치 지역의 대부분에서 충적층(10m 내외)과 암반층(70m 내외)이 수리적으로 연결되어 있다는 것을 시사한다. 6시간 간격의 지하수위 관측 자료를 이용하여 지하수위가 상승하는 횟수, 상승량의 합계 산정 등 변동양상을 분석하였다. 분석 결과 해양 및 지구 조석의 영향을 받는 관측정의 경우 지하수위 상승 개수가 450개/yr 이상이 대부분이며, 수위 변동량은 0.1 ～ 1m 정도이고, 수위변동 자료를 시계열로 나타내 보면 하루에 약 2번의 상승과 하강을 반복하는 수위변동 형태를 볼 수 있었다. 양수의 영향이 우세한 관측정에서는 수위 상승 개수가 약 360개/yr, 수위 변동량은 1m 이상의 값이 우세하게 나타났다. 지하수위 상승량은 암반/충적 관측정 모든 관측정에서 전반적으로 강수량과의 상관계수가 높았으며, 같은 관측정의 .자료라도 6시간 간격의 관측 자료보다, 12시간 및 24시간 관측 간격으로 분석한 결과에서 상관관계가 더 높게 나타났다. 12시간 및 24시간 관측 간격으로 분석할 경우 조석 및 양수에 의해 발생된 주기적인 지하수위 변동 성분이 제거되면서 강수에 대한 지하수위 반응의 상관도가 높아진 것으로 해석된다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.448-454
• /
• 1996

The microstructural evolution of BaTiO3 ceramics during cubic-hexagonal phase transformation was investiga-ted. In the case of phase transformation from cubic to hexagonal BaTiO3 the hexagonal phase nucleated at the surface region of specimen. On the other hand in the case of that from hexgonal phase to cubic, cubic phase was initiated at the center region of specimen. And fast grain growth and irregular grain boundary shape could be also observed during these transformation processes. Besides low densified hexagonal BaTiO3 specimen was made with low forming pressure. The phase transformation of these specimens toward cubic phase was relatively retarded comparing with dense hexagonal BaTiO3 specimens. was made low forming pressure.. The phase transformation of these specimens toward cubic phase was relatively retarded comparing with dense hexagonal BaTiO3 specimens. These results were explained that hexagonal BaTiO3 had lowder surface energy than cubic phase.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.1-4
• /
• 2009

이 논문에서는 메타데이터 레지스트리(ISO/IEC 11179: Metadata Registry)들이 가지고 있는 메타데이터 정보를 검색하고, 공유하기 위해 일관성 있는 질의 언어를 제안한다 메타데이터 레지스트리는 국제 표준으로서 메타데이터들을 정의하고 이들을 관리 및 공유를 하기 위해 만들어졌다. 이와 같은 국제 표준을 기반으로 한 메타데이터 레지스트리들이 서지, 환경, 의료 분야 등의 다양한 영역에서 사용되고 있다. 이와 함께 메타데이터 레지스트리를 기반으로 하여 기존에 저장된 메타데이터들을 검색하고, 공유하고, 관리하고자 하는 이슈에 대한 연구가 진행되고 있다. 하지만 현재까지 다양한 분야에 있는 메타데이터 레지스트리가 가지고 있는 정보를 가져오기 위한 표준 인터페이스가 제공되고 있지 않다. 이러한 문제를 해결하기 위한 연구로 SQL에 메타데이터 레지스트리를 위한 공통 연산자들을 추가하여 메타데이터 레지스트리에 존재하는 데이터들을 활용하는 연구가 있다. 하지만 이런 연산자들을 이용하기 위해서는 상용 DBMS 엔진에 추가되어야 하며, 연산자들이 없는 경우 일관된 질의어를 수행할 수 없다는 문제를 가지고 있다. 따라서 이 논문에서는 이와 같은 문제를 해결하기 위해서 국제 표준인 SQL(ISO/IEC 9075) 에서 정의하고 있는 사용자 정의 타입(User-defined types) 을 기반으로 한 일관성 질의 언어를 제안한다.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.42-48
• /
• 1993

KTP(KTiOPO4) single crystals were grown by the TSSG(top seeded solution growth) method using the Ksp401s flux. A heat-pipe based growing furnace was used, and the temperature stability and the homogenity of the growing solution in the platinum crucible were within the level of It 0.5℃ and ±0.9℃, respectively. The effects of some operating variables such as operating temperature range, initial cooling rate, forced stirring, reuse of the flux were investigated. As the initial cooling rate was decreased to the degree of 0.1℃/hr and some proper stirring effect by the crystal rotation was introduced to the present experimental condition, bigger and better crystals without inclusion grew. A single crystal with the maximum sixte of 44 ×39 ×17mm3 was obtained and showed the SHG conversion efficiency of 21.39) even without the anti-refilection coating.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.347-354
• /
• 2013

In this paper, we propose a enhancing document clustering method using term re-weighting by the expanded term. The proposed method extracts the important terms of documents in cluster using semantic features, which it can well represent the topics of document to expand term using WordNet. Besides, the method can improve the performance of document clustering using re-weighting terms based on the expanded terms. The experimental results demonstrate appling the proposed method to document clustering methods achieves better performance than the normal document clustering methods.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.1 no.2
• /
• pp.1-25
• /
• 2006

The purpose of this research is to examine the major determinants affecting the user's satisfaction and usage intention on Biosafety Portal Site. The development of the research model is based on the empirical studies on the web site. Five hypotheses are derived and tested using regression analysis. The results from regression analysis suggest that technology, content, design and navigation all contributed significantly to the user's satisfaction. In addition, user's satisfaction with portal had a very significant influence on the continuance intention.