• Journal of Intelligence and Information Systems
• /
• v.10 no.1
• /
• pp.13-25
• /
• 2004

In the online shopping environment, consumers suffer from the process of selecting an optimal supplier. Although comparison shopping agent-based web sites and consumers' online community sites support the selection process, they have limitations when considering diverse and dynamic purchase conditions as a whole, which is the cause of additional consumer effort for optimal supplier selection. This study provides a decision support model with a sensitivity analysis for selecting an optimal supplier considering purchase conditions as a whole. It screens suppliers with filtering factors and provides optimal suppliers through a sensitivity analysis from a Quadratic Programming model. We implemented a prototype system and showed that it could be an effective decision support system for selecting the optimal supplier in the online shopping environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.484-492
• /
• 2006

A multi-code biorthogonal code keying(MBCK) system consists of multiple waveform coding block, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude preceding blcok(CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. Redundant bits of CA-MBCK for constant amplitude coding are not only used to make constant amplitude signal but also used to improve the bit error rate(BER) performance at receiver. In this paper, we proposed a transmission scheme which combine CA-MBCK with $Q^{2}PSK$ to improve bandwidth efficiency of CA-MBCK. The BER performance of the scheme is same that of CA-MBCK in additive white gaussian noise(AWGN). And we showed that BER performance of the proposed system can be improved using redundant bits of constant amplitude preceding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6A
• /
• pp.577-586
• /
• 2011

Modem digital communication systems are required to use forward error correction (FEC) codes to combat inevitable channel impairment. Turbo codes or low density parity check (LDPC) codes, using iterative decoding with soft decision detection (SDD) information, are the most common examples. The excellent performance of these codes should be conditioned on accurate estimation of soft decision detection information. In order to use FEC codes with iterative decoding for Multi-Input Multi-Output (MIMO) system, reliable soft decision channel gain should be provided. In this paper, we investigate efficient SDD methods for turbo-coded MIMO system, and derive the corresponding formulas of SDD for various MIMO detection schemes. We present simulation results of the derived SDD schemes for turbo-coded MIMO systems, and show that the presented results almost approximate to maximum likelihood detection performance with much less computational load.

• Journal of Labour Economics
• /
• v.28 no.1
• /
• pp.29-60
• /
• 2005

This paper investigates how firms adjust wages, employment and hours in response to demand shifts. It focuses on rigidities and asymmetries in such adjustments. Major findings are as follows. First, wage adjustments are fairly small compared with worker adjustments. Second, wage adjustments are asymmetric with respect to sales growth: there is no responsiveness of wage growth when sales are declining, while adjustments are significantly positive when sales are rising. On the contrary, worker adjustments are symmetric with respect to demand shifts. Third, while workers are linearly adjusted to the sales growth, some nonlinearity is observed in the wage adjustment. Fourth, hours are generally nonresponsive to demand shocks. Finally, union firms cut wages rather than workers in the face of negative demand shocks.

• Journal of Chest Surgery
• /
• v.40 no.7 s.276
• /
• pp.499-502
• /
• 2007

Left ventricular inflow obstruction can be caused by a persistent left superior vena cava (SVC) and a dilated coronary sinus. A 31-day-old male infant with secondum atrial septal defect (ASD) and bilateral SVC underwent an operation for treating his uncontrollable congestive heart failure. The preoperative 2-dimensional echocardiography showed a normally sized mitral valve shrouded by a dilated coronary sinus. The operation consisted of pericardial patch closure of the ASD, coronary sinus unroofing and left SVC transfer to the right atrial auricle. The postoperative course was complicated by persistent chylothorax, which was controlled by thoracic duct ligation, He was discharged to home at the postoperative day 39. He has been followed up for 9 months and has displayed normal development.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.20-29
• /
• 1992

In $BaTiO_3-NaNbO_3$ system, complete series of solid solution occurs and $30BaTiO_3{cdot}70NaNbO_3$ composition is congruently melted. Single crystals of $30BaTiO_3{cdot}70NaNbO_3$, composition were grown by Czochralski method in this investigation. Single crystals with dimensions of 15 - 20mm diameter and 20 - 30mm length, were grown at the pulling rate of 2.0mm/h and the rotation rate of 5.0 -l0rpm. Core structures were found in the grown crystals and inclusions, cellular boundaries existed at the core region. The origin of core occuring was unstability of the crystal- melt interface due to the poor conductivity of latent heat through the crystal during the crystal growing process. Obtained crystals were optically homogeneous except the core region and showed high optical transmittance in the visible range.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.129-134
• /
• 2013

Sapphire wafers are used as an important substrate for the production of blue LED (light emitting diode) and the LED's performance largely depends on the quality of the sapphire single crystals. There are several crystal growth methods for sapphire crystals and Kyropoulos method is an efficient way to grow large diameter and high-quality sapphire single crystals with low dislocation density. During Kyropoulos growth, the convection of molten melt is largely influenced by the hot zone geometry such as crucible shape, heater and refractory arrangements. In this study, CFD (computational fluid dynamics) simulations were performed according to the bottom/side ratios (per unit of the crucible surface area) of heaters. And, based on the results of analysis, the molten alumina flows and remelting phenomena were analyzed.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.146-151
• /
• 2011

A method to evaluate and to reduce the source- and receiver- consistent noise in a cross-well travel time data was proposed. These systematic noises, which can cause some serious effects on the result of a travel time tomography, can be considered as the source and receiver statics. The method evaluates the statics through a curve-fitting of the first arrival travel times in the common source and common receiver gathers. Feasibility study was conducted on a synthetic data which simulates the cross-well travel time tomography to detect a small scale tunnel in a uniform background medium. First arrival travel times at a given source and receiver points are computed by a raytracing method, and the source consistent- and receiver consistent noises are added to the record. In case of the added noise with rms amounting to 25% of the maximum expected anomalous travel time delays, it is confirmed that the method successfully extracted the noise at the 7th step of iteration.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.385-395
• /
• 2011

The flexural strength of composite HSB hybrid I-girders under positive moment is investigated by the moment-curvature analysis method to evaluate the applicability of the current AASHTO LRFD design specification to such girders. The hybrid girders are assumed to have the top flange and the web fabricated from HSB600 steel and the bottom flange made of HSB800 steel. More than 6,200-composite I-girder sections that satisfy the section proportion limits of AASHTOL RFD specifications are generatedby the random sampling technique to consider a statistically meaningful wide range of section properties. The flexural capacities of the sections are calculated by the nonlinear moment-curvature analysis in which the HSB600 and HSB800 steels are modeled as an elastoplastic, strain-hardening material and the concrete as CEB-FIP model. The effects of ductility ratio and compressive strength of concrete slab on the flexural strength of composite hybrid girders make of HSB steels are analyzed. Numerical results indicated that the current AASHTO-LRFD equation can be used to calculate the flexural strength of composite hybrid girders fabricated from HSB steel.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.197-200
• /
• 2008

The RC corbels with the ratio of shear span-to-effective depth less than 1 are commonly used to transfer loads from beams to columns. The ultimate strengths and structural behaviors of RC corbels are controlled by the shear span-to-effective depth ratio, strength of concrete, shape and quantity of the reinforcement, and geometry of corbels. In this study, a simple indeterminate strut-tie model reflecting all characteristics of the ultimate strengths and complicated structural behaviors is presented for the design of RC corbels. In addition, a load distribution ratio, defined as a magnitude of load transferred by a horizontal truss mechanism, is proposed to help structural designers perform the design of RC corbels by using the strut-tie model approaches of current design codes. The ultimate strengths of 30 RC corbels tested to failure are evaluated by using the ACI 318-05's strut-tie model code for the validity check of the proposed indeterminate strut-tie model and load distribution ratio.