• Journal of the Korean Geotechnical Society
• /
• v.26 no.5
• /
• pp.57-64
• /
• 2010

Kriging techniques have been used to estimate the spatial distribution of soil layers and soil properties in the geotechnical engineering area. Since the selected kriging technique may provide different values of estimation, the selection of method is important in the geotechnical estimation. In this paper, the spatial distribution of the thickness of consolidation layer of Songdo International City is estimated using simple, ordinary, and universal kriging techniques, and the reliability of estimated results is analyzed. It is shown that the consolidation layer thickness estimated by the simple kriging technique is larger than those by other kriging techniques when the location of estimation is far from the locations where the measured data exist. In this case, the reliability of the simple kriging technique is observed to be lower than those of other techniques. Universal kriging gives a negative value for thickness of consolidation layer in some locations away from the data. It is concluded that the ordinary kriging is the most optimized estimation technique because the reliability of ordinary kriging technique is higher than those of other ones and the consolidation layer thickness estimated by the ordinary kriging locates within the reasonable range.

• Proceedings of the KSEEG Conference
• /
• 2001.04a
• /
• pp.30-32
• /
• 2001

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.147-159
• /
• 1999

Geostatistical methods were used for the groundwater flow analysis in a heterogeneous anisotropic aquifer. This study area is located at Sonbul-myeon in Hampyong-gun of Cheonnam Province which is a hydrogeological project area of KORES(Korea Resources Cooperation). Linear regression analysis shows that the topographic elevation and groundwater level of this area have very high correlation. Groundwater-level contour maps produced by ordinary kriging and cokringing have large differences in mountain areas, but small differences in hill and plain areas near the West Sea. Comparing two maps on the basis of an elevation contour map, a groundwater-level contour map using cokriging is more accurate. Analyzing the groundwater flow on two groundwater-level contour maps, the groundwater of study area flows from the high mountain areas to the plain areas near the West Sea. To verify the enffectiveness of geostatistical methods for the groundwater flow analysis in a heterogeneous anisotropic aquifer, the flow directions of groundwater were measured at two groundwater boreholes by a groundwater flowmeter system(model 200 $GeoFlo^{R}$). The measured flow directions of groundwater almost accord with those estimated on two groundwater-level contour maps produced by geostatistical methods.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.3
• /
• pp.15-20
• /
• 2019

A large amount of site investigation data is essential to obtain reliable design value. However, site investigations are generally insufficient due to economic problems. It is important to estimate the ground profile information in unboring region for accurate earthwork-volume prediction, and such ground profile information can be estimated by using the geo-statistical approach. Furthermore, the ground profile information in unboring region can be estimated by training a model via machine learning technique such as artificial neural network. In this paper, artificial neural network-based model estimated the ground profile information in unboring region, and this results were compared with that of ordinary kriging technique, which is referred to the geo-statistical approach. Accordingly, a total of 84 ground profile information in an actual bridge environment was split into 75 training and 9 test databases. The observed ground profile information of the test database was compared with those of the ordinary kriging technique and artificial neural network.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.2
• /
• pp.58-63
• /
• 1995

Cokriging was applied for the estimation of the water levels of the basal leachate and the surrounding groundwater at the Nanjido waste landfill area. When the groundwater level is estimated at the high relief area, it makes a good result to use the data of groundwater level and elevation simultaneously because groundwater level is correlated with topography. This study determined the best semivariogram model of 87 groundwater levels and 144 elevations through cross validation test, and produced the contour maps of groundwater levels using ordinary kriging and universal kiging. Two contour maps don't make big difference at the waste site because this area has a large number of groundwater level data. However, they show big difference at the upper left part of the study area because this area has high relief and a small number of sample data. Their difference is also found at the south area near the Han river. When the topography is considered for the both areas, the contour map of cokriging is thought to be closer to the real groundwater distribution than that of kriging.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.16-33
• /
• 2012

The aim of this study is to estimate aboveground biomass carbon stocks using ordinary kriging(OK) which is the most commonly used type of kriging and regression kriging(RK) that combines a regression of the auxiliary variables with simple kriging. The analysis results shows that the forest carbon stock in Danyang is estimated at 3,459,902 tonC with OK and 3,384,581 tonC with RK in which the R-square value of the regression model is 0.1033. The result of RK conducted with sample plots stratified by forest type(deciduous, conifer and mixed) shows the lowest estimated value of 3,336,206 tonC and R-square value(0.35 and 0.18 respectively) is higher than that of when all sample plots used. The result of leave-one-out cross validation of each method indicates that RK with all sample plots reached the smallest root mean square error(RMSE) value(22.32 ton/ha) but the difference between the methods(0.23 ton/ha) is not significant.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.505-510
• /
• 2003

충북 보은읍 지역을 대상으로 계절별 지하수의 변화 양상을 파악하기 위하여 2002년 겨울과 봄에 지하수의 현장수질 성분인 수온, pH, Eh, DO, EC, TDS 등을 측정하고, 지하수를 채취하여 실내에서 유기물 분석을 실시하였다. 지하수 수질을 평가하기 위하여 계절별로 수질자료의 통계분석과 등치선도를 작성하였다. 보은읍의 수질자료에서 정규크리깅을 이용하여 작성된 지하수 수온의 등치선도에 의하면 봄철 조사에서 전반적으로 온도가 3-4$^{\circ}C$ 정도 상승하였고 PH는 겨울철 조사에서는 전반적으로 균등하게 나타나지만, 봄철 조사에서는 북동쪽 지역에 높게 나타나고 있다. 나머지 현장수질 성분들은 계절에 관계없이 일정한 경향을 보여주고 있는데, Eh는 모두 중앙 지역에 높은 수치들이 나타나고 있고, EC 수치는 동쪽 지역이 낮고 서쪽 지역이 높게 나타나고, TDS 수치는 중앙 지역을 중심으로 높게 나타나고, DO 수치는 북쪽 지역이 낮고 남쪽 지역이 높게 나타난다. TCE는 봄철 조사에서는 전 지역에서 비교적 넓게 분포하지만, 겨울철 조사에서는 남쪽 지역이외의 지역에서는 TCE 수치가 나타나지 않았다.

• Proceedings of the KSEEG Conference
• /
• 2002.04a
• /
• pp.454-457
• /
• 2002

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.14-14
• /
• 2015

공간보간기법은 미계측지역의 강수예측을 위해 통상적으로 사용되는 방법 중의 하나이다. 이 연구에서는 기상청에서 제공하고 있는 RCP 8.5 시나리오에 의한 남한상세 강수자료 중 지형이 복잡한 도서지역에서 제공되지 않는 데이터 누락격자에 대하여 최적의 공간보간기법을 선정하여 강수자료를 생성할 수 있도록 하였다. 적합한 보간기법을 선정하기 위해 데이터 누락지역에 대한 분석을 수행하였고, 최신 행정구역도에 맞추어 $1km{\times}1km$ 격자를 한반도 전체지역에 맞추어 생성된 격자를 사용하였다. ESRI사의 ArcGIS 프로그램을 이용하여 공간보간기법을 적용하였다. 사용된 보간법은 역거리가중치법(IDW), 정규크리깅(Ordinary Kriging), 보편크리깅(Universal Kriging), 스플라인(Spline)이며 가장 적합한 공간보간기법을 선정하기 위해 기후변화시나리오에 의한 데이터 중 해안선 주변 특정격자에서의 값을 누락시켜 공간보간기법을 통해 생성된 값과 기후변화 시나리오에 의한 값을 정량적으로 비교하였다. 공간보간기법의 적합도 평가를 위해 MAE(Mean Absolute Error), MSE(Mean Squared Error), PBIAS(Percent of BIAS), G(goodness of prediction) 분석을 수행하였고, 산점도 분석을 통해 실제값과 보간값의 오차율 평가를 병행하여 최적 공간보간기법을 결정하였다. 사용된 강수데이터는 RCP 8.5 시나리오에서 2015~2019년 중 강수가 높게 나타난 8월 자료를 이용하였다. 해안선 지역의 강수량 추정시 역거리 가중치법과 크리깅방법은 일부 지점에서 과다 추정되는 경향이 있고, 스플라인 방법이 전체적인 총 강수량이 기후변화시나리오에 의한 실제값과 유사한 것으로 나타났다. 실제값과 보간값의 교차검증을 수행한 결과 정규크리깅 기법이 가장 높은 정확도를 보였으며, 전체적으로 실제값과 유사한 범위내의 강수량이 생성되는 것으로 나타났다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.295-304
• /
• 2008

This paper comprises two specific objectives. The first is to examine the applicability of Ordinary Kriging interpolation(OK) to finite element method that is based on variogram modeling in conjunction with different allowable limits of separation distance. The second is to investigate the accuracy according to theoretical variograms such as polynomial, Gauss, and spherical models. For this purpose, the weighted least square method is applied to obtain the estimated new stress field from the stress data at the Gauss points. The weight factor is determined by experimental and theoretical variograms for interpolation of stress data apart from the conventional interpolation methods that use an equal weight factor. The validity of the proposed approach has been tested by analyzing two numerical examples. It is noted that the numerical results by Gauss model using 25% allowable limit of separation distance show an excellent agreement with theoretical solutions in literature.