• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.140-148
• /
• 2003

An analysis fur the warping process has been performed to design the warper beam. Nonlinear material response is included in the physical model of polyester yarn. Large deformation finite element simulation considering contact and frictional analysis are used to obtain the pressure on the barrel of the warper beam. Loading condition on the flange is assumed by using the pressure on the barrel, winding number of yarn, Poisson's ratio of fiber, and fiber volume fraction. By using the above loading conditions NASTRAN finite element simulation is performed to calculate stress distribution and deformation of the warper beam. By comparing the deformed shape of the flange with experimental result, loading condition on the flange has been obtained. The obtained loading conditions on the barrel and flange can be utilized to design the warper beam.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.05a
• /
• pp.430.2-430.2
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.523-524
• /
• 2008

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.343-344
• /
• 2007

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.6
• /
• pp.47-54
• /
• 2005

In this paper, we propose a method that search the sweet spot of antenna beam, and keep it for fast speed transmission in millimeter wave on point-to-point link. We use TDD(Time Division Duplex) as transfer method, and it transfers the control data of antenna. The proposed method is the modified genetic algorithm which selects a superior initial group through slave-processing in order to resolve the local solution of genetic algorithm. The efficiency of the proposed method is verified by means of simulations with white Gaussian noise and not on point-to-point link.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.39-45
• /
• 2007

This paper presents a novel scheme that quickly searches for the sweet spot of multiple array antennas, and locks on to it for high-speed millimeter wavelength transmissions, when communications to another antenna array are disconnected. The proposed method utilizes a modified genetic algorithm, which selects a superior initial group through preprocessing in order to solve the local solution in agenetic algorithm. TDD (Time Division Duplex) is utilized as the transfer method and data controller for the antenna. Once the initial communication is completed for the specific number of individuals, no longer antenna's data will be transmitted until each station processes GA in order to produce the next generation. After reproduction, individuals of the next generation become the data, and communication between each station is made again. Simulation results of 1:1, 1:2, 1:5 array antennas confirmed the efficiency of the proposed method. The 16bit split is 8bit, but it has similar performance as 16bit gene.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.554-562
• /
• 2007

To increase the demand of HR Plate with thickness up to 22mm, it is necessary that HR Plate is applicable to full member in steel bridge including main girder. In this study, availabilities of the narrow steel box girder of light railway transit with HR Plate width as a main member are discussed. Computational analysis is performed in 15 bridge models of light railway transit with beam element and plate element. As an analysis results, three models in tight railway transit are presented. In conclusion, it is validated that HR Plate can be applying to narrow steel box girder in the light railway transit.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.139-140
• /
• 2008

지상라이다는 고정도의 3차원 영상을 제공하고 레이저 빔을 현장이나 대상물에 발사하여 짧은 시간에 수백만점의 3차원좌표를 기록할 수 있는 최신 측량장비로서 다양한 응용분야에서 두각을 나타내고 있다. 본 연구에서는 지상라이다를 이용한 건축물의 3자윈 자동 윤곽선 추출을 다룬다. 지상라이다는 건축물의 3차원 윤곽선을 신속하게 추출할 수 있지만 지상기반 시스템이므로 여러 가지 장애물 때문에 건국물의 하단부에서는 추출이 쉽지 않다. 기존 항공라이다를 이용한 알고리즘에서는 사진의 색상차나 모폴로지 특성에 의존하여 범위를 제한하고, 이를 기반으로 윤곽선을 추출하였다. 하지만 지상라이다의 경우 항공라이다에 비해 분해능이 월등히 높다. 또한, 지상라이다는 지상에서 측정하기 때문에 항공라이다에서 어려운 건축물의 측면이나 정면도 윤곽선 추출이 가능하기 때문에 본 논문에서는 사진을 이용하지 않고 전처리를 하지 않은 데이터를 직접 이용하여 건물의 정면 윤곽선을 추출하는 것을 제안한다. 건물의 크기와 데이터 수 즉, 라이다로 측정한 포인트 수를 고려한 효율적인 Decimation방법을 제안하고 또한, Decimation된 데이터이서 지역적으로 제일 큰 값과 작은 값을 찾아낸다. 그 중 많이 벗어난 점을 편차를 이용하여 제거한다. 이렇게 찾아낸 건축물의 외곽점들을 이어 만든 윤곽선을 최종적으로 보간하여 좀 더 현실과 가까운 윤곽선 추출 방법을 제안한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.4
• /
• pp.232-237
• /
• 2019

It has recently been combined with advanced technologies such as AR and VR, and its application range is expanding to various forms of smart signage. However, until now, digital signage service that reaches us is installed in many floating populations such as bus stops, elevators, and banks and is used in the form of providing news, weather, and advertisements. In addition, large companies, government offices, and outdoor advertising companies occupy the market. The use of such services in small and medium-sized businesses and small retail stores is costly and expensive to manage. Also, it is difficult to generalize the market because services and solutions are being deployed in the market in the form of top-down. Therefore, in this paper, we proposed a digital signage system for transmitting a remote video advertisement that uses a show window in front of the store as a beam project screen for small retail stores, and can remotely set and manage and update it in OSGi service platform.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.985-991
• /
• 2023

A tissue-equivalent phantom is necessary for quality control of hyperthermia therapy. However, since there is no phantom for this purpose, phantoms made from agar are being used in various studies. The tissue-equivalent properties of the agar phantom were confirmed by comparison with the tissue-equivalent material bolus in this study. CT images of the agar phantom and bolus were acquired, and tissue equivalent characteristics were analyzed with image analysis and dose calculation using a computerized radiation therapy planning system. The average pixel value was 96.960±10.999 in bolus, 108.559±8.233 in 3% agar phantom, and 111.844±8.651 in 4% agar phantom. Using the SSD technique, 100 cGy was prescribed at a depth of 1.5 cm and 6 MV X -ray was set to irradiated to 10x10 cm2, and the absorbed dose according to depth was calculated from the central axis of the beam. The intraclass correlation coefficient of dose distribution of bolus, 3% agar phantom, and 4% agar phantom was 0.979 (p<.001, 95%CI .957-.991). The density (g/cm3) at the point where the absorbed dose was calculated was 0.990±0.020 at the bolus, 1.018±0.020 at the 3% agar phantom, and 1.035±0.024 at the 4% agar phantom. In this study, the internal density distribution and uniformity of the agar phantom were confirmed to be appropriate as a tissue equivalent material by analysis of CT images and a computerized radiation therapy planning system.