• Journal of the Korean Wood Science and Technology
• /
• 제38권6호
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.

• Journal of the Korean Wood Science and Technology
• /
• 제40권1호
• /
• pp.26-37
• /
• 2012

Recently, the demand and supply on the Hanok have been increased. However, Hanok should be requested larger section of structural members because of excessive roof weight. So, structural skin-timber was manufactured to get a lightweight structural member. The structural skin-timber has exterior shape with larger section but a great volume of wood be removed. The reduced strength of structural skin-timber can be supplemented by hybridizaion of structural member. Japanese larch and Domestic pine were used to manufacture the structural skin-timber. Structural skin-timbers of rectangular shape and cylinder shape were manufactured and tested to evaluate the bending properties. The intended strength property could not be obtained because member had been suffered severe damage by precision deficiency of manufacturing machine. However, if precision of manufacturing machine would be improved and additional hybridizaion of structural skin-timber would be done, lightweight structural member will be able to be manufactured. Structural skin-timber did not showed statistical significancy between two species, so it is possible to use pine mixed with larch. Only MOR of larch showed statistical significancy between rectangular shape and cylinder shape, so it is necessary to use of those as separate things. However, the rest of skin-timber can be judged mixed using because of non statistical significancy. The objective of this study was the development of lightweight larger structural member with relatively strength. If hybrid member of skin-timber could be developed with wood-ceramics, lightweight steel and more, it can be possible to be used as a building material of Hanok, interior material, post & beam construction material and more.

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.1-8
• /
• 1998

Western redcedar timber, 26 by 26cm in cross section and by 200cm long, was dried in a laboratory radio-frequency/vacuum kiln under 65torr of ambient pressure and a fixed frequency of 6.78MHz for the potential rapidly dry large timber. All process data were collected and saved in a computer through a data acquisition system. The temperature in the middle of timber was higher than temperature at the quarter point of timber length and thickness. Temperature gradients developed in the longitudinal and transverse direction of timber. The pressure in the middle of timber was higher than pressure at the quarter point of timber length. The pressure in the middle of timber was lower in the early stage of drying, and higher in the latter stage of drying than pressure at the quarter point of timber thickness. Power density was very highest during heating period and then gradually decreased. The drying curve was approximately linear and the total drying time was 27 hours from an initial moisture content(MC) of 48.6 percent to a final Me of 19.2 percent with only a few mild internal checks in the middle location of timber.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.13-19
• /
• 2014

Three heat-treatment schedules were applied to $90{\times}90mm$ dimension square lumber of Pinus koraiensis, one of major domestic species, and their colors and physical properties were investigated for obtaining an optimum schedule. Each square lumber was heat-treated three times. The temperatures of $170^{\circ}C$ and $190^{\circ}C$, and the time of 9 hours and 13 hours were used for the first heat-treatment. The schedule of $190^{\circ}C$ and 7 hours were used for the next two heat-treatments. The averages of brightness $L^*$ decreased linearly as the heat-treatment repeated and its standard deviations also decreased slightly. While the averages of color difference ${\Delta}E^*$ increased linearly as the heat-treatment repeated and its standard deviations also increased slightly. The average compressive strength of the heat-treated specimen was higher than that of the control by 9%, which deviates from previous reports. ASE and WPG of the heat-treated specimens were measured to confirm that heat-treatment improved dimensional stability significantly.

• Journal of architectural history
• /
• 제9권3호
• /
• pp.37-49
• /
• 2000

Jeong-Gak is one of the Confucian architecture in Cho-Sun Dynasty. This study is founded on the architectural characteristics and the Confucian order of Jeong-Gak. The Cho-Sun Dynasty had put in operation positive Jeong-Pyo Policy for diffusion Confusion ethics and educate the people. Prize methods of Jeong-Pyo Policy are Jeong-Ryeo, Jeong-moon, remit corvee, present a post and present goods. Jeong-Moon and Jeong-Ryeo is red gate. Vocabularies of Jeong-Moon and Jeong-Ryeo have used mixing but I think that both meaning is different essentially each other. The red gate that elected in front of gate or gateway is Jeong-Moon and another red gate that elected an entrance a village is Jeong-Ryeo. Jeong-Moon and Jeong-Ryeo have no roof, so they are many problem for maintenance and management. Accordingly Jeong-Gak come out from the reign of King Jung-Jong because shelter of Jeong-Moon and Jeong-Ryeo. The function of the Jeong-Gak is shelter of the Jeong-Moon and Jeong-Ryeo, encouragement of Sam-Gang(三綱) ethics, and ostentation of a family. Besides it has a monumental characteristic. It has been distributed the whole country land that Jeong-Gak is closely related with the community of same family (rural community) the latter period of the Cho-Sun Dynasty. The architectural particularity of the Jeong-Gak is brilliance of building materials as compared with different Confucian architecture and appearance of various architectural type. It is that a type of Jeong-Gak appeared Jeong-Ryeo-Gak type, a lofty gate type, and Stone Jeong-Ryeo type. And there are keeping a rule that is to say Confucian order clearly.

• Journal of the Korean Geographical Society
• /
• 제48권5호
• /
• pp.750-767
• /
• 2013

The purpose of this study is to consider debates the reorganization of administrative districts and to investigate the role of maps in this debate during the early stage of French Revolution. For this, firstly, we examined the argument of reformers who attempted to change the administration system of the Old Regime. We found that physiocrats proposed map use for their attempt to reform this system. Secondly, we considered the debate on the theme of the new division of the kingdom on the basis of speeches or interventions delivered to the National Assembly. Robert de Hesseln's map, itself influenced by the geometric spirit shown by the map of Cassini, played an crucial role in the utopian ideas of revolutionaries who would divide France in administrative units of equal size geometric grid. Thirdly, the deputies decided the number and boundary of department on the basis of Hennequin's map. The final cut which resulted in very tense negotiations with local leaders was irregular polygons modeled on patterns of economic relations, and elements of relief and historical tradition. Fourthly, new administrative divisions are plotted on the map of Cassini and presented to the National Assembly. And it was declared as a new administrative division of France.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.99-107
• /
• 1997

This study was executed to test the possibility of replacement for domestic Japanese larch(Larix leptolepis) for hardwoods and to acquire the information about the effects of drying temperature on internal temperature, moisture content and drying defects. In high-temperature drying, internal temperature increased rapidly to boiling point, immediately after that point the internal temperature rising rate was reduced. In the case of drying at temperature of $125^{\circ}C$, internal temperature could reach at boiling point in a very short time. Moisture content in high-temperature drying showed constant drying rate period and first period of falling rate drying together in 4 hours since experiment begun. There was no strong correlation between initial moisture content and final moisture content. Average drying rate at $115^{\circ}C$, $120^{\circ}C$ and $125^{\circ}C$ was 1.42%/hr, 1.88%/hr and 2.02%/hr, respectively; the case of drying temperature of $125^{\circ}C$ showed most rapid drying rate. Drying rate of $125^{\circ}C$ was so rapid that it showed more severe shrinkage, bow, collapse, end check, and internal check development than in other drying conditions. The result of this study showed the strong possibility of high-temperature drying for Japanese larch, and to dry Japanese larch optimally, dry bulb temperature should not exceed $120^{\circ}C$.

• Journal of Korea Water Resources Association
• /
• 제40권1호
• /
• pp.51-62
• /
• 2007

To estimate more accurately the outflow over a sharp crested side weir, it is necessary to analyze the flow characteristics over side weir and to estimate the discharge coefficient in the weir equation. The purpose of this study is to estimate the discharge coefficients of sharp crested rectangular and triangular side weirs by means of hydraulic model experiments with the variations of upstream Froude number in the main channel and length and apex angle. Experimental results show that the discharge coefficients depend on the shape and geometric conditions of side weir as well as the upstream Froude number in the main channel. Through the multiple regression analysis, formulas of discharge coefficient for rectangular and triangular types are proposed and its applicability is confirmed by comparing estimated and measured discharges over side weirs.

• Journal of Korean Philosophical Society
• /
• 제130권
• /
• pp.161-186
• /
• 2014

Recently, the social concerns on well dying come to the fore as important discourse on dignity of human death, which detonation by the problem of euthanasia. Well dying means 'good death' the meaning of a word, and it means 'prepared death', 'decented death' 'beautiful death' by extention of sematic context like this as a general rule. In this paper the writter have considered that how the view of Buddhism's death contribute to the discourse on well dying, which regarding death as the starting point, death conquest as the finishing point of the theory. The Buddhism's discourse on the attitude interpretation conquest process of death contributed to formation of abundant discourse on well dying, especially the view of Buddhism is able to contribute to conquest of death anxiety and death education, that death conquest interpret to spiritual psychological phenomenon not physical physiological eternal life (or immortality) and conquer death through enlightenment on reality of things by spiritual psychological change.

• Journal of the Korean Wood Science and Technology
• /
• 제39권4호
• /
• pp.318-325
• /
• 2011

Pitch pine (Pinus rigida Miller) retaining walls using Steel bar, of which the constructability and strength performance are good at the construction site, were manufactured and their strength properties were evaluated. The wooden retaining wall using Steel bar was piled into four stories stretcher and three stories header, which is 770 mm high, 2,890 mm length and 782 mm width. Retaining wall was made by inserting stretchers into Steel bar after making 18 mm diameter of holes at top and bottom stretcher, and then stacking other stretchers and headers which have a slit of 66 mm depth and 18 mm width. The strength properties of retaining walls were investigated by horizontal loading test, and the deformation of structure by image processing (AlCON 3D OPA-PRO system). Joint (Type-A) made with a single long stretcher and two headers, and joint (Type-B) made with two short stretchers connected with half lap joint and two headers were in the retaining wall using Steel bar. The compressive shear strength of joint was tested. Three replicates were used in each test. In horizontal loading test the strength was 1.6 times stronger in wooden retaining wall using Steel bar than in wooden retaining wall using square timber. The timber and joints were not fractured in the test. When testing compressive shear strength, the maximum load of type-A and Type-B was 130.13 kN and 130.6 kN, respectively. Constructability and strength were better in the wooden retaining wall using Steel bar than in wooden retaining wall using square timber.