• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.225-225
• /
• 2023

하상 측정은 하천 유지관리, 수공구조물 설계 및 보수, 수생태 조사의 필수적인 자료이다. 최근 4대강 대규모 사업 이후 자연적 안정화로 인해 침식 및 재퇴적이 진행되어 정밀 하상 모니터링이 요구되고 있다. 통상적인 하상 조사 기법은 레벨측량 및 RTK-GPS 등을 활용하여 점단위로 직접 계측하는 기법과 수심이 깊을 경우 ADCP와 같은 음향측심기법을 통해 하상변동을 계측하고 있다. 하지만 점단위 직접 측정은 사구와 사련과 같은 하상 구조 교란 및 계측 시 위험을 동반하고 수심자료의 측정오차가 크게 발생하는 한계점이 존재한다. 또한 초음파 방식의 경우 막음길이와 바닥면 노이즈 등의 한계점으로 50 cm 미만의 저수심부 하상 측정이 불가능한 실정이다. 이러한 한계점을 극복하기 위해 최근 드론의 보급으로 수심라이다(Bathymetry LiDAR), SFM, 드론 탑재 초분광 영상을 활용한 초분광수심법과 같은 저고도, 고해상도의 비접촉식 면단위 하상 측정 기법이 대안으로 각광받고 있고 최근 관심은 해당 최신 기술의 성능 점검 및 적용성 평가에 있다. 따라서 본 연구에서는 초분광수심법 중 보편적으로 적용할 수 있는 최적밴드비분석(OBRA)의 성능 점검과 실무 적용성을 국내 하천을 대상으로 검토하였다. 해당 기술의 실무 적용성 평가항목 중 수심 적용 범위가 경제적이고 효율적인 성능 평가의 주된 항목이다. 선행 연구에 따르면 감천을 대상으로 저수심부의 성능 평가를 진행한 결과 상세한 하상계측이 가능하다고 제시하였다. 따라서 본 연구는 낙동강-황강 합류부를 대상으로 전형적인 평수기 탁도 조건에서 초분광수심법을 적용할 경우 최대측정가능수심의 범위를 결정하는 방법 및 결과를 제시하려고 한다. 또한 현장실험 당시 합천댐 방류로 인하여 황강의 탁도가 높아진 상태에 기인하여 고탁도 조건에서 초분광수심법의 적용성 평가도 추가 검토하였다. 해당 연구는 수심과 밴드비의 비선형성을 통해 최적 밴드비 분석의 결과로 도출될 수 있는 상관계수와 평균 제곱근 오차(RMSE)의 동향을 보아 다양한 시나리오의 배제수심을 통해 최대측정가능수심을 산정하였으며 그 이상의 범위는 수심맵 산정에서 제외하였다. 그 결과로 낙동강 본류에서 2.5 m 이하, 황강 지류에서 1.25 m 이하의 최대측정가능수심이 나타났고 해당 범위 이하에서는 상세한 하상이 나타났다. 또한 고탁도 조건인 황강에서는 낙동강에 비해 절반 수준의 최대측정가능수심 범위가 나타나 탁도 조건에 따른 초분광수심법의 한계가 있는 것을 확인하였다.

• Clean Technology
• /
• v.16 no.4
• /
• pp.277-283
• /
• 2010

Eosin Y is used a colorant and dye but eosin Y is harmful toxic substance. In this study, the adsorption characteristics of granular activated carbon have been investigated for the adsorption of eosin dye dissolved in water. The effects of initial dye concentration, contact time, pH and temperature on adsorption of eosin by a fixed amount of activated carbon have been studied in batch adsorber and fixed bed. The adsorptivity of activated carbon for eosin Y were largely improved by pH control. When the pH was 3 in the sample, the eosin Y could be removed 99% of initial concentration (10 mg/L). The adsorption equilibrium data are successfully fitted to the Freundlich isotherm equation in the temperature range from 293 to 333 K. The estimated values of k and ${\beta}$ are 19.56-134.62, 0.442-0.678, respectively. The effects of the operation conditions of the fixed bed on the breakthrough curve were investigated. When the inlet eosin Y concentration is increased from 10 to 30 mg/L, the corresponding adsorption breaktime appears to decrease from 470 to 268 min at bed height of 3 cm and a constant flow rate of 2 g/min. When the initial eosin Y flow rate is increased from 1 to 3 g/min, the corresponding adsorption breaktime appears to decrease from 272 to 140 min at bed height of 3 cm and inlet concentration of 10 mg/L. Also, breaktime increased with increasing bed height at flow rate of 2 g/min and inlet concentration of 10 mg/L. And length of adsorption zone showed similar patterns.

• Analytical Science and Technology
• /
• v.19 no.3
• /
• pp.255-262
• /
• 2006

In this study, we attempted to evaluate the sorptive loss of VOC upon their contact with different material surfaces including clothing pieces. For the purpose of this study, we developed a method to evaluate such loss by employing a filter holder pack in the thermal desorption line of the GC/FID system. The calibration curves of different aromatic VOCs including benzene, toluene, and xylene were made by loading them at different quantities through the analytical line. A series of experiments were conducted repetitively to draw calibration data sets for all three materials covering glass fiber, cotton, and nylon. The results were then compared in terms of both material types and of VOC types. The extent of sorptive loss increased in a highly systematic manner across different materials such as glass fiber, cotton, and nylon. The patterns of sorptive loss also increased gradually across VOC type such toward in the direction of increasing molecular weights: benzene, toluene, and xylene. According to this experimental study, it is concluded that sorptive behavior of pollutint compounds like VOC can be controlled by the combined effects of both chemical properties and material characteristics.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.93-101
• /
• 2008

The application of solid phase microextraction (SPME) is generally conducted by directly immersing the fiber into the liquid sample or by exposing the fiber in the head space (HS). The extraction temperature, the time of incubation, and application of stirring are often designated to be the most important parameters for achieving the best extraction efficiencies of HS-SPME analysis. In this study, relative importance of these three analytical parameters involved in the HS-SPME method is evaluated using a polydimethylsiloxane/carboxen (PDMS/CAR) fiber. To optimize its operation conditions the competing relationships between different parameters were investigated by comparing the extraction efficiency based on the combination of three parameters and two contracting conditions: (1) heating the sample at 30 vs. 50 C, (2) exposing samples at two durations of 10 vs. 30 min, and (3) application of stirring vs. no stirring. According to our analysis among 8 combination types of HS-SPME method, an extraction condition termed as S50-30 condition ((1) 1200 rpm stirring, (2) $50^{\circ}C$ exposure temp, and (3) 30 min exposure duration) showed maximum recovery rate of 45.5~68.5% relative to an arbitrary reference of direct GC injection. According to this study, the employment of stirring is the most crucial factor to improve extraction efficiency in the application of HS-SPME.

• 한국노년학
• /
• v.30 no.4
• /
• pp.1145-1161
• /
• 2010

The objectives of this study were to examine how social networks of old retirees impact on their retirement satisfaction, and through this, to suggest ways of improving their retirement satisfaction. Data used in this study were from 2006 KLoSA(Korean Longitudinal Study of Ageing), which were collected from 1,009 elderly people aged 65 and over who resided metropolis and smaller medium cities and answered regarding their retirement satisfaction. Data were analyzed by Binary Logistic Regression method. As a result, the frequency of contact with children, the number of participation in their social activities, and the satisfaction of relationship with children were the significant variables to predict retirement satisfaction. In addition, other variables such as gender, subjective health status, type of retirement, and duration of past retirement have been found as significant variables to explain retirement satisfaction. Implications for designing effective retirement plan and service systems have been discussed.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.410-418
• /
• 2023

Recently, advancements and commercialization in the field of maritime autonomous surface ships (MASS) has rapidly progressed. Concurrently, studies are also underway to develop methods for automatically surveying the condition of various on-board equipment remotely to ensure the navigational safety of MASS. One key issue that has gained prominence is the method to obtain values from analog gauges installed in various equipment through image processing. This approach has the advantage of enabling the non-contact detection of gauge values without modifying or changing already installed or planned equipment, eliminating the need for type approval changes from shipping classifications. The objective of this study was to identify a dynamically changing indicator needle within noisy images of analog gauges. The needle object must be identified because its position significantly affects the accurate reading of gauge values. An analog pressure gauge attached to an emergency fire pump model was used for image capture to identify the needle object. The acquired images were pre-processed through Gaussian filtering, thresholding, and morphological operations. The needle object was then identified through Hough Transform. The experimental results confirmed that the center and object of the indicator needle could be identified in images of noisy analog gauges. The findings suggest that the image processing method applied in this study can be utilized for shape identification in analog gauges installed on ships. This study is expected to be applicable as an image processing method for the automatic remote survey of MASS.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.64-71
• /
• 2024

The most critical aspect of full-arch prosthodontic treatment is evaluating whether the patient's vertical occlusal dimension is appropriate, and if necessary, restoring it through increasing vertical dimension. If the vertical occlusal dimension is too low, it can lead to reduced chewing efficiency, as well as not only aesthetic concerns but also potential issues like hyperactivity of muscles and posterior displacement of the mandible. This report is about the patient dissatisfied with pronunciation and aesthetics due to an inappropriate vertical occlusal dimension resulting from prior prosthetic interventions, underwent full-arch prosthodontic restoration treatment. Through the utilization of digital diagnostic apparatus, a comprehensive evaluation was undertaken for patient's vertical occlusal dimension, occlusal plane orientation, and the condition of prosthetic restorations. Through 3D facial scanning, the facial landmarks were discerned, and subsequently, the new occlusal plane was established. This provided the foundation for a digitally guided diagnostic wax-up. An elevation of 5 mm from the incisor was determined. Comprehensive dental rehabilitation was then executed for all remaining teeth, excluding the maxillary four incisors. The treatment protocol followed a systematic approach by initially creating implant-supported restorations on both sides of the dental arch to establish a stable occlusal contact. Subsequently, prosthetic restorations for the natural dentition were generated. Diagnostic and treatment planning were established through the utilization of facial scanning. This subsequently led to a reduction in treatment complexity and an expedited treatment timeline.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.2
• /
• pp.419-427
• /
• 2024

This study assessed the potential impact of gas leakage resulting from accidental damage to buried urban gas pipelines during perforating operation near subway construction sites. The risk of explosions due to ignition sources such as static electricity, arising from gas infiltrating the subway construction site through storm sewers and sewage pipes, was evaluated using the ALOHA program. The results of the threat zone calculation, which input various parameters of urban gas pipelines such as length, diameter, and pressure, indicated that the flammable area within the vapor cloud extended from 1.2 to 1.4 km (red zone), the blast area ranged from 0.8 to 1.0 km (yellow zone), and the jet fire extended from 45 to 61 m (red zone). This study demonstrates that within the flammable area of the vapor cloud, a specific combination of concentration and conditions can increase flammability. The blast area may experience explosions with a pressure of 1.0 psi, sufficient to break glass windows. In the event of a jet fire, high temperatures and intense radiant heat exposure lead to rapid fire propagation in densely populated areas, posing a high risk of casualties. The findings are presented in terms of the sphere of influence and threat zone ranges.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.209-216
• /
• 2024

Four accidents occurred between 2020 and 2022 after car ferries built according to a coastal passenger ship modernization plan collided with other ships or came into contact with the dock when entering Jeju Port. Accidents primarily occurred owing to careless ship handling and drift by wind during ship handled by herself using bow and stern thrusters without tugboats. Accordingly, in this study, we analyzed the collision accident focusing on car ferry H and the critical wind speed at which the ship cannot be controlled using its own power, tugboat operation plan in increasing wind speed were proposed based on the power required for the ship to berth parallel to the pier without a tugboat considering the external force and moment generated while the ship is berthing. A analysis of the critical wind speed of car ferry H by relative wind direction when using tugboats or not according to the loading status and the berthing speed, showed that one tugboat should be used at the stern when the lateral wind speed is over 10 m/s and two tugboats should be used when the lateral wind speed is over 14m/s berthing at Jeju port.

• Journal of Hospice and Palliative Care
• /
• v.9 no.2
• /
• pp.106-111
• /
• 2006

Purpose: In terminal cancer patients, pain control with narcotic analgesics and supportive care by hospice are very useful treatment modality. However, many patients and their caregivers are poorly compliant in using narcotic analgesics for fear of addiction and tolerance. And also many patients and family caregivers are reluctant to accept hospice, presuming that hospice means patient's condition is no longer reversible and progressively deteriorating. The purpose of this study was to evaluate and analyze the perception of using narcotic analgesics and hospice by family caregivers of terminal cancer patients who play a critical role in health care in Korean culture. Methods: A total of 54 terminal ranter patient's family caregivers participated in this study. Questionnaire consisted of 15 questions about narcotic analgesics and hospice. Results: The study revealed following results. 1) family caregivers who are not aware of hospice are more than half (56.7%). 2) 81.8% of family caregivers agreed that hospice care is beneficial to terminal cancer patients. 3) 85.1% of family caregivers were under financial burden. 4) 83.2% of patient complained pain in 24 hours. 3) while 88.5% of family caregivers believed that narcotic analgesics can control pair, 79.1% and 79.6% of them also believed that use of narcotic analgesics would result in addiction and tolerance, respectively. Conclusion: There still exist barriers to family caregivers in using narcotic analgesics for pain control. And also, terminal cancer patient's family caregivers have poor information about hospice. Therefore, educational intervention about narcotic analgesics by pharmacist and doctors are needed for proper pain control for terminal ranter patients. In addition, more precise information about hospice care should be provided for terminal cancer patients and their family caregivers.