• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.459-462
• /
• 2005

The KHST(Korean High Speed Train) which had been developed by through 'G7-R&D project' has succeeded trial running test up to 350km/h on the Kyoung-Bu High Speed Track in December 16th, 2004. In order to evaluate the function and characteristics of KHST, various experimental conditions have been considered and conducted. In this paper, measured current collection characteristics and dynamic behaviors of KHST's pantograph are analysed over 300 to 350km/h in running speed of KHST. A measuring system developed and installed on the KHST for measuring the performance and mechanical characteristics of the KHST's pantograph was used for this trial running test and eventually, we proofed that KHST has a remarkable and stable current collection characteristics as it had been designed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2158_2159
• /
• 2009

본 논문에서는 DC전원설비 접속부에서의 접촉불량에 의한 발열 특성에 대하여 실험, 분석하였으며 사용된 DC 전원설비는 상용 교류전원을 직류전원으로 변환하는 AC/DC 컨버터의 출력전원을 이용하는 LED 가로등 조명설비의 전원 접속부을 대상으로 하였다. 외부의 기계적 진동에 의해 동전선 접속부에 아크와 열이 발생하며 이때 발생한 발열 온도와 열 분포를 측정하였으며 적열부가 형성된 후 25분이 경과하였을 때 최고 $842.68^{\circ}C$까지 온도가 상승하였으며 접속부의 접촉전압은 1.5~1.6V, 통전전류는 6.6~6.9A로 약간의 변화만 나타남을 볼 수 있었다. 또한 DC전원에서 동전선 접속부에서의 산화물 생성과 증식 거동에 대하여 분석하였으며 AC전원에서와 유사하게 산화물이 형성되어 성장함을 볼 수 있었다. 이러한 실험과 분석 결과는 향후, DC 전원설비에서의 전기화재 예방을 위한 자료로 활용 가능할 것으로 기대된다.

• KEPCO Journal on Electric Power and Energy
• /
• v.1 no.1
• /
• pp.85-91
• /
• 2015

We investigated the structure of inductive coupler and its magnetic coupling to increase the transmission coefficient for power line communication. A Rogowski coil, which is an air-cored inductive coupler, and a magnetic cored coupler were fabricated to analyze the transmission coefficient for different coupler parameters. This paper proposes the impedance matching method using lumped elements and an impedance transformer to increase the transmission coefficient. In the experiment, the transmission coefficient of the proposed system was increased in both narrowband and broadband cases, and a trade-off between the transmission coefficient and the bandwidth was shown. This method will be useful for the further study of impedance matching with the load variation.

• Proceedings of the KGS Conference
• /
• 2002.11a
• /
• pp.33-36
• /
• 2002

국경선은 '분리의 선'인 동시에 '접촉의 선'이며 '장벽'인 동시에 '가장자리'이고 '차단'이면서 '접합'이 동시에 존재하는 공간이다. 초국경적 공간은 이런 관점에서 역설적인 측면을 가진다. 과거부터 쌓여온 경험 풍부한 협력 관계가 비록 이 지역은 정치적 의사결정권이나 경제활동의 중심으로부터 멀리 떨어져 있어 주변부에 해당하지만 이런 '협력적 관성'으로 인해 '혁신의 장소'로 성장하려는 적극적인 의지를 보이는 공간이 되기도 한다.(중략)

• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.335-341
• /
• 2009

Elastohydrodynamic lubrication (EHL) analysis shows that film thickness is very flat in the contact area and pressure distribution is somehow similar to that of Hertzian contact pressure except the outlet region with pressure spike. These typical patterns of EHL film thickness and pressure are the cases under the steady contact conditions of applied loads and speeds. However, many engineering contacts are rather under the conditions of varying loads and contact speeds, and therefore the predictions for endurance life and performance of machine elements with steady EHL analysis are not suitable in many occasions. This study shows the differences in film thickness formation and pressure distribution between steady and transient contact conditions in several contact cases.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.258-260
• /
• 2006

비정질 합금재료와 페라이트를 사용하여 비접촉식 커플러를 제조하여 각각의 재료가 적용가능한 범위를 규명하고자 하였다. 비정질 합금재료에 비해 페라이트는 안정적인 특성을 발휘하는 주파수 대역이 좁으며, 낮은 포화자속밀도로 인해 내전류 특성이 떨어졌다. 즉 페라이트는 20 MHz 이하의 주파수 대역과 비정질 재료가 적용되는 선로보다 유입전류가 낮은 전력선에 적용 가능할 것으로 보인다.

• Tribology and Lubricants
• /
• v.26 no.5
• /
• pp.263-271
• /
• 2010

The rollers of cylindrical roller bearing are axially profiled to relieve high edge stress concentration caused by mainly their finite length and by misalignment. In this paper, a numerical analysis is carried to study the EHL of misaligned (tilted) rollers with axially profiled ends. Using a finite difference method with non-uniform grids and the Newton-Raphson method, the highly nonlinear EHL problems are systematically solved. Physically consistent solutions are obtained for moderate load, material parameters and very small misalignment. For different misalignment angles, contours and sectional plots of pressure and film shape near both edge regions are compared. The asymmetric pressure distributions and film shapes show that the EHL results of finite line contacts are highly dependent upon very small amounts of roller misalignment. Especially, the effect of misalignment on the EHL pressure distribution is much higher than the film shapes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.427-436
• /
• 2007

The catenary of a high-speed electrical train is modeled by the finite elements with the upper suspension wire, lower contact wire, and droppers, and the dynamic contact between the catenary and the pantograph is numerically analyzed by solving the whole equations of motion of the pantograph and the catenary system subjected to the contact condition. For the stability of the numerical solution, with the cubic spline interpolation of the catenary displacement, the velocity and acceleration constraints as well as the displacement constraint are imposed on the contact point. Through the various numerical examples, it is shown that the dropper positions as well as the static deflection are crucial to determine the contact and separation of the pantograph of a high-speed train.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2043-2044
• /
• 2006

배전 계통을 대상으로 하는 통신 시스템에 전력통신(PLC : Power Line Communication)기술을 적용하고자 할 때, 고압 배전선의 통신 채널로서의 특성 분석이 근간이 되어야 한다. 일반적으로 지하 공동구의 배전 지중 케이블에는 케이블-케이블 간의 전기적, 물리적 접촉점인 접속 개소가 일정한 간격으로 존재하게 된다. 그러므로 통신 신호의 매개체가 되는 전력 케이블의 채널 특성 분석에는 케이블 접속 개소의 영향도 고려 대상이 되어야 한다. 본 논문에서는 서울시 광진구 일부의 부하를 담당하고 있는 22.9 kV 고압 배전 지중 선로를 시험 선로로 비접촉식 커플러를 통해 통신 신호를 전송하여 삽입 손실 측정 결과를 보았고 케이블 접속 개소의 영향을 주파수 영역에서 채널 특성을 통해 분석 하였다. 시험 결과 케이블 접속 개소를 통과할 때 채널 특성은 십여 dB의 신호 감쇄를 보였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.281-285
• /
• 2002

A new method of dynamic contact force measurement between a pantograph and a contact wire is proposed in this paper The method does not require design modification of an original pantograph in order to install sensors such as load cells. Contact forces can be expressed as the sum of vertical shear forces at the support points and inertial forces. Using specially-designed strain gage rosettes. vertical shear forces at the supported points can be measured without noise mixing and thermal effects. In order to obtain contact forces from shear forces, 3 inertial force compansation methods are proposed and compared in this paper. By validation process, the new proposed measurement method is verified to be applicable to the on-line current collection test.