• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.47-51
• /
• 1986

로울러 베어링의 로울러는 길이방향으로 적당하게 Profiling하여 양단부에서 발생하는 응력집중을 줄이고 있다. 로울러와 레이스간의 접촉을 단순한 탄성접촉문제로 해석하는 경우에는 유막의 개념이 없어서 로울러와 레이스 사이의 압력분포와 유막형상을 정확하게 나타내기가 어려우므로 탄성변형과 압력에 따른 윤활유의 점도 변화를 고려한 탄성유체윤활(EHL)해석이 필요하다. 대부분의 해석은 무한장 로울러로 취급하는 것이 보통이며 실제의 로울러에 해당하는 유한한 길이의 선접촉 EHL 해석은 Mostofi & Gohar 및 Kuroda & Arai의 해석 정도이나 각각은 수렴하중이 작거나 로울러의 길이가 아주 짧은 경우에 해당한다. 본 연구에서는 FDM과 Newton-Raphson method를 이용하여 길이가 유한한 실제 크기의 Profiled 로울러에 대한 EHL상태에서의 압력분포와 유막형상을 보다 하중이 온 경우에 대해서 구하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.3-11
• /
• 1996

본 연구는 고체 추진기관의 각종 밀봉 부에 많이 사용되는 O-링의 설계시 고려되는 각종 형상인자의 변화에 따른 O-링의 거동과 응력 상태를 분석하여 설계 최적조건을 찾기 위한 내용을 다루고 있다. 조립 부의 내외경과 조립 공차, 챔퍼길이와 각도, 조립 홈의 외경, 깊이, 폭, 구성반경, O-링의 내경과 선 직경 등의 설계 변수에 의한 조립부 형상과 재료의 물성치, 유한요소 선택 및 요소 분할, 경계조건, 하중조건, 접촉부 정의 등을 MSC/PATRAN3의 $PCL^{[1]}$/로 프로그래밍 하여 설계변수에 의한 결과 분석을 손쉽게 수행할 수 있도록 시도하였다 고무의 Hyperelastic 물성치는 문헌상의 자료$자료^{[2]}$에 제시된 Ogden 상수를 사용하였으며 추후에는 인장시험, 순수전단시험, 이 축 인장시험을 통해 실험적으로 측정$^{[3]}$ 하여 적용할 예정이다. 고무의 대변형, 대 변형률을 고려한 비선형 응력해석은 MSC/PATRAN3의 Advanced FEA 모듈과 ABAQUS 5.5를 사용하였다. 본 연구에서의 해석결과를 설계변수들의 영향을 비교 분석하는데 사용하였으나 그 정확도가 입증된 상태는 아니며 추후 실제 조립 및 수압시험을 통해 평가할 예정이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.596-602
• /
• 2018

Nanoimprint lithography (NIL) is an emerging technology that enables cost-effective and high-throughput nanofabrication. In ultraviolet (UV) NIL, low-cost and high-speed production can be achieved using a non-vacuum environment at room temperature and low pressure. However, there are problems with the formation of bubble defects in such an environment. This paper investigates the shape of the mold cavity and the bubble defect formation in UV NIL in a non-vacuum environment. The bubble defect formation was simulated using two-dimensional flow analysis and the VOF method for commonly used cavity mold shapes (rectangular, elliptical, and triangular). The characteristics of the resist flow front and various contact angles were also analyzed. The shape of the mold cavity had a very significant effect on the bubble defect formation. For all cavity shapes, a smaller contact angle with the mold and larger contact angle with the substrate decreased the possibility of bubble defect formation. The elliptical shape was the most effective for preventing bubble defect formation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.92.1-92.1
• /
• 2017

고경도 질화막 합성과 밀착력 향상을 위한 기판 청정 기술은 밀접한 상관관계가 있다. 음극 진공 아크 증발원을 이용하여 기판 청정을 실시하였으며, 기판 전압이 증가함에 따라 기판 청정 효과가 증가하였으나, 그 역효과 또한 확인할 수 있었다. 특히 기판 전압 인가부의 전극 접촉부 위치에 따라 청정 형상이 크게 영향을 받음을 확인하였다. 기판 청정 후 고경도 질화막을 형성시켜 100N 이상의 밀착력 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.337-346
• /
• 2014

This study aimed to understand the mode characteristics of a droplet subject to periodic forced vibration and the detachment of a droplet placed on a plate surface. An surface was coated with Teflon to clearly observe the behavior of a droplet. The contact angle between the droplet and surface and the hysteresis were found to be approximately $115^{\circ}C$ and within $25^{\circ}C$, respectively. The coating process was performed in a clean room that had an environment with a low level of contaminants and impurities such as air dust, detergents, and particles. To predict the resonance frequency of a droplet, theoretical and experimental approaches were applied. Two high-speed cameras were configured to acquire side and top views and thus capture different characteristics of a droplet: the mode shape, the detachment, the separated secondary droplet, and the waggling motion. A comparison of the theoretical and experimental results shows no more than 18 discrepancies when predicting the resonance frequency. These differences seem to be caused by contact line friction, nonlinear wall adhesion, and the uncertainty of the experiment. For lower energy inputs, the contact line of the droplet was pinned and the oscillation pattern was axisymmetric. However, the contact line of the droplet was de-pinned as the oscillation became more vigorous with increased energy input. The size of each lobe at the resonance frequency is somewhat larger than that at the neighboring frequency. A droplet in mode 2, one of the primary mode frequencies, exhibits vertical periodic movement as well as detachment and secondary ejection from the main droplet.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.404-411
• /
• 2007

new domain/boundary decomposition method is suggested to perform efficient finite element analyses of contact problems. A penalty method is used for connecting an interface or contact interfaces with neighboring subdomains that satisfy continuity conditions. As a result, the derived effective stiffness matrices are always positive definite, and computational efficiency can be improved to a considerable degree. Moreover, any complex-shaped domain can be divided into independently modeled subdomains without considering the conformity of meshes along the interface. Using a computer code based on the present method, these advantageous features are confirmed through a set of numerical examples.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.55-62
• /
• 2003

Subdomain-interface variational formulation is presented to solve a class of dynamic contact problems of composite structures. The penalty method is used for imposing inequality constraints on contact surfaces and for connecting finite element subdomains that satisfy interface compatibility conditions. As a result, any complex-shaped domain can be easily divided into independently modeled subdomains without considering the conformity of meshes on interfaces. Some advantageous features of the present method are shown through a set a numerical studies with a developed computer code.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.4
• /
• pp.469-476
• /
• 2007

A domain/boundary decomposition technique is applied to carry out efficient finite element analyses of 3-D contact problems. Appropriate penalty functions are selected for connecting an interface and contact interfaces with neighboring subdomains that satisfy continuity constraints. As a consequence, all the effective stiffness matrices have positive definiteness, and computational efficiency can be improved to a considerable degree. If necessary, any complex-shaped 3-D domain can be divided into several simple-shaped subdomains without considering the conformity of meshes along the interface. With a set of numerical examples, the basic characteristics of computational efficiency are investigated carefully.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1358_1359
• /
• 2009

가스 절연 개폐장치(Gas Insulated Switchgear : GIS)의 고체 스페이서에 경사기능성 재료(Functionally Graded Material : FGM)를 적용할 때, 전계의 완화를 예상할 수 있다. 특히, 균일 유전율 분포를 가지는 스페이서에서 양극 근처에 집중된 높은 전계가 FGM 스페이서를 사용할 때, 스페이서와 $SF_6$ 가스의 접촉부로 옮겨지며, 그 크기가 완화됨을 확인할 수 있었다[1]. 본 연구에서는 상용 고체 스페이서의 양극 부근에서의 전계 집중을 감소시키기 위해 전극 형상의 최적화를 수행하였다. 최적화 기법으로는 완전계승계획법(Full Factorial Design : FFD)과 결합된 반응표면법(Response Surface Method : RSM)을 이용하였으며, 균일 유전율 스페이서에서 양극 형상을 최적화하였다. 또한 타원형 유전율 분포를 가지는 FGM 스페이서를 이용함으로써, 상용 GIS 모델에 비해 최대 전계가 크게 완화될 수 있음을 확인하였으며, 상용 GIS의 외함부의 크기를 줄여 실제 소형화 가능 여부를 확인하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.125-134
• /
• 2005

Recently, there have been reported on the results that the material life is reduced by fretting conditions and the initial crack made by low stress under fretting. The purpose of this paper is to show that the results of finite element analysis for the fretting contact problems of a flat rounded punch are nearly consistent with the theoretical solutions and to research that the results about effects of the contact zone according to geometries and mechanical properties of pad.