• Journal of the Korean GEO-environmental Society
• /
• v.10 no.1
• /
• pp.5-14
• /
• 2009

This study is to analyze numerically the spatial behaviors of the solute transport in a spatially correlated variable-aperture fracture under the effective normal stress conditions. Numerical results show that the solute transport in a fracture is strongly affected by the spatial correlation length of apertures and applied effective normal stress. According to increasing spatial correlation length, the mean residence time of solute is decreased and the tortuosity and Peclet number (is a dimensionless number relating the rate of advection of a flow to its rate of diffusion) is also decreased. These results mean that the geometry of the aperture distribution is favorable to the solute transport as the spatial correlation length is increased. However, according to the applied effective normal stress is increased, the mean residence time and tortuosity have a tendency to increase but the Peclet number is decreased. The main reason that the Peclet number is decreased, is that the solute is displaced by one or two channels with relatively higher local flow rate due to the increment of contact areas by increasing effective normal stress. Moreover, based on numerical results of the solute transport in this study, the exponential-type correlation formulae between the mean residence time and the effective normal stress are proposed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.40-47
• /
• 2021

In this study, the structural behavior by the details of the lap region with the headed bar was estimated through finite element analysis. To solve the finite element analysis of the anchorage region with complex contact conditions and nonlinear behavior, a quasi-static analysis technique by explicit dynamic analysis was performed. The accuracy of the finite element model was verified by comparing the experimental results with the finite element analysis results. It was confirmed that the quasi-static analysis technique well reflected the behavior of enlarged headed bar connection. As a result of performing numerical analysis using 21 finite element models with various development lengths and transverse reinforcement indexes, it was confirmed that the increase of development length and transverse reinforcement index improved the maximum strength and ductility. However, to satisfy the structural performance, it should be confirmed that both design variables(development length and transverse reinforcement index) must be enough at the design criteria. In the recently revised design standard(KDS 14 20 52 :2021), a design formula of headed bar that considers both the development length and the transverse reinforcing bar index is presented. Also the results of this study confirmed that not only the development length but also transverse reinforcing bars have a very important effect.

• Tribology and Lubricants
• /
• v.28 no.4
• /
• pp.153-159
• /
• 2012

Tapered roller bearings are widely used in high axial-load and radial-load applications. In this study, a numerical analysis is performed to study a finite line contacts EHL problem between a tapered roller and raceway in tapered roller bearings. Converged solutions are obtained for moderate load and material parameters using a finite difference method with non-uniform grids and the Newton-Raphson method. The contours and sectional plots of pressure distribution and film shape are compared. The pressure distribution and film shapes near both ends of the roller are very different from those in the central part and are transversely asymmetric. The maximum pressure and absolute minimum film thickness always occur at the small end of the roller.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.262-270
• /
• 1988

A numerical solution of the elastohydrodynamic lubrication problem for an axially profiled cylindrical roller is presented. The problem is analyzed using finite difference method and Newton-Raphson method. The effect of side leakage and compressibility of lubricants are considered and axially nonuniform grid is constructed over the computation zone. Isobars, contours and section graphs show pressure variation and film shape. Contours plot is very similar to the previously reported experimental observations based upon optical interferometry. The maximum pressure and the minimum film thickness occur near the start of the profiling. The method used makes it possible to design an optimum axial profile of the roller to increase the life of rolling bearings.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.106-106
• /
• 2003

반도체 소자의 고집적화에 따라 채널길이와 배선선 폭은 점차 줄어들고, 이에 따라 단채널효과, 소스/드레인에서의 기생저항 증가 및 게이트에서의 RC 시간지연 증가 등의 문제가 야기되었다. 이를 해결하기 위하여 자기정렬 실리사이드화(SADS) 공정을 통해 TiSi2, CoSi2 같은 금속 실리사이드를 접촉 및 게이트 전극으로 사용하려는 노력이 진행되고 있다. 그런데 TiSi2는 면저항의 선폭의존성 때문에, 그리고 CoSi2는 실리사이드 형성시 과도한 Si소모로 인해 차세대 MOSFET소자에 적용하기에는 한계가 있다. 반면, NiSi는 이러한 문제점을 나타내지 않고 저온 공정이 가능한 재료이다. 그러나, NiSi는 실리사이드 형성시 NiSi/Si 계면의 산화와 거침성(roughness) 때문에 높은 누설 전류와 면저항값, 그리고 열적 불안정성을 나타낸다. 한편, 초고집적 소자의 배선재료로는 비저항이 낮고 electro- 및 stress-migration에 대한 저항성이 높은 Cu가 사용될 전망이다. 그러나, Cu는 Si, SiO2, 실리사이드로 확산·반응하여 소자의 열적, 전기적, 기계적 특성을 저하시킨다. 따라서 Cu를 배선재료로 사용하기 위해서는 확산방지막이 필요하며, 확산방지재료로는 Ti, TiN, Ta, TaN 등이 많이 연구되고 있다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.347-350
• /
• 2009

The latticed mesh grounding is compared with the diagonal mesh grounding. In the result, The latticed mesh grounding better than the diagonal mesh grounding at the maximum touch voltage, the grounding resistance and the total length of conductors.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.11a
• /
• pp.3-11
• /
• 1996

본 연구는 고체 추진기관의 각종 밀봉 부에 많이 사용되는 O-링의 설계시 고려되는 각종 형상인자의 변화에 따른 O-링의 거동과 응력 상태를 분석하여 설계 최적조건을 찾기 위한 내용을 다루고 있다. 조립 부의 내외경과 조립 공차, 챔퍼길이와 각도, 조립 홈의 외경, 깊이, 폭, 구성반경, O-링의 내경과 선 직경 등의 설계 변수에 의한 조립부 형상과 재료의 물성치, 유한요소 선택 및 요소 분할, 경계조건, 하중조건, 접촉부 정의 등을 MSC/PATRAN3의 $PCL^{[1]}$/로 프로그래밍 하여 설계변수에 의한 결과 분석을 손쉽게 수행할 수 있도록 시도하였다 고무의 Hyperelastic 물성치는 문헌상의 자료$자료^{[2]}$에 제시된 Ogden 상수를 사용하였으며 추후에는 인장시험, 순수전단시험, 이 축 인장시험을 통해 실험적으로 측정$^{[3]}$ 하여 적용할 예정이다. 고무의 대변형, 대 변형률을 고려한 비선형 응력해석은 MSC/PATRAN3의 Advanced FEA 모듈과 ABAQUS 5.5를 사용하였다. 본 연구에서의 해석결과를 설계변수들의 영향을 비교 분석하는데 사용하였으나 그 정확도가 입증된 상태는 아니며 추후 실제 조립 및 수압시험을 통해 평가할 예정이다.

• Tribology and Lubricants
• /
• v.29 no.6
• /
• pp.353-359
• /
• 2013

The rollers and/or races in cylindrical and tapered roller bearings should be profiled to relieve high edge stress concentrations caused by their finite lengths and misalignment. In this study, a numerical analysis was performed to investigate the elastohydrodynamic lubrication (EHL) of a Lundberg profile-type cylindrical roller. A finite difference method with fully nonuniform grids and the Newton-Raphson method were used to present detailed EHL pressure distributions and film shapes, as well as the variations in the minimum and central film thicknesses with the profile modification coefficient. In the Lundberg profile, the maximum pressure and minimum film thickness always occurred near the edges. Proper modification of the Lundberg profile considerably increased the minimum film thickness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1306-1309
• /
• 2003

In the present paper, finite element analyses were carried out to evaluate the most important feature of a stent, that is. high radial strength and flexibility. Palmaz-Schatz 154 stent and two new models(stent A, stent B) were selected because they are the most representatives of tubular stents. Finite element analyses for the stent system were performed using ABAQUS/Explicit code. As a result, Palmaz-Schatz 154 stent shows sufficient radial strength but it needs some improvement in general properties such as high flexibility, low elastic recoil, low longitudinal contraction and low metal coverage area. Other two models show that sufficient flexibility, foreshortening and longitudinal recoil.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.31-38
• /
• 2016

The FDS-HCIB method is expanded to simulate water-oil-air flows around oil booms under relative motion, which is intended to increase the thickness of contained oil. The FDS scheme captures discontinuity in the density field and abrupt change of the tangential velocity across an interface without smearing. The HCIB method handles relative motions of thin oil booms with ease. To validate the developed FDS-HCIB code for water-oil-air flow around a moving body, the computed results are compared with the reported experimental results on the shape, length, and thickness of the oil slicks under towing. It is observed that the increase in pressure field between two barriers lifts the oil slick and the interfacial wave propagates and reflects as one barrier gets closer to the other barrier.