• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.665-674
• /
• 2015

A TSL (Thin Spray-on Liner) which consists of polymers has a higher initial strength, faster construction time and higher waterproofing performance than the conventional cementitious shotcrete. Main supporting mechanism of TSL is the adhesion and tensile strength which is distinct from the conventional shotcrete. Even though highly in demand due to its outstanding characteristics, TSL is not yet well-known support material. In this study, to evaluate contact behavior of TSL, numerical analysis was performed with comparing result from laboratory tests. From the analysis, cohesive behavior at the contact surface between TSL and rock can be evaluated by using combination of cohesive and the damage model. In addition, results show that the cohesive stiffness controled slope between force and displacement, the fracture energy controled level of force at the contact.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.63-63
• /
• 2004

구동 및 동력 전달용으로 많이 쓰이는 기어장치는 최근 고속도비에서 사용이 증가함에 따라 다단기어장치의 설계에 대한 관심이 높아지고 있다. 하지만 다단 기어장치의 설계는 장치의 파손확률을 고려하지 않고 정적인 하중과 균일한 강도를 유지하는 차원에서 접촉해석과 강도설계 등이 주류를 이루었으며 대부분 설계자의 경험과 감각에 의해 시행착오적이고 반복적인 방식으로 이루어지고 있다. 또한 임의의 시간에서 다단 기어장치가 설계자의 의도대로 작동할 확률인 신뢰성에 대한 연구가 미흡하였다.(중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.175-178
• /
• 2001

탄소는 활성탄으로 제조되어 다른 재료와 접촉시에 수분을 많이 흡수하여 콘크리트와 배합시 과정이 활성적으로 진행되는 점을 이용하여 조직이 좀더 밀도 있게 콘크리트 자체의 일부 단점을 보완하여 강도개선 특히 인장강도 개선을 밝히고자 하는데 본 연구의 목적이 있다. 시행착오 방법을 사용하여 콘크리트에 배합을 해나가는 과정으로 배합비를 처음 소량에서부터 점점 증가시켜나가는 방법을 택하였다. 배합에서 비 숙련에 의한 오차를 줄이기 위해서 K 건설레미콘에서 20년 경력자에 의해서 배합관리 되었고 $17^{\circ}$ $\pm$$3^{\circ}C$ 자동온도 조절기에 의해서 양생되었다.(중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2008

Weathered soil slope loses its shear strength if it is exposed in the air for a long time or in contact with water. And this kind of strength loss is remarkable in dam slope which has very big difference in water level according to the season. In this study, shear strength loss of weathered soil due to saturation had been found out through dryness and wetness repetition direct shear test. Also relation between penetration blow number(Nc) and shear strength parameter had been found out through small sized dynamic cone penetration test device and the correlation equation of Nc had been proposed through artificial neural network analysis to estimate shear strength parameter easily.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2021

The aim of this paper is to improve durability of cement paste by imparting hydrophobicity to the surface and sphere of cement-based materials. A cement paste mixed with a silane/siloxane-based water repellent, and the initial hydration performance, flow performance, and age-specific compressive strength were measured. In addition, the water contact angle, SEM, and XRD before and after surface polishing were measured. When 0.5% of the silane/siloxane-based water repellent was mixed into the cement paste, the compressive strength increased, but the compressive strength decreased as the mixing amount increased by 1.5% and 3.0%. When a silane/siloxane water repellent was incorporated into the cement paste, the hydrophilicity was improved and the contact angle was increased due to hydrophobicity. In addition, the contact angle after surface polishing was found to be larger than the contact angle before surface polishing.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.264-264
• /
• 2011

Poly [(N, N'-oxydiphenylene) pyromellitimide], polyimide (PI) film은 기계적 강도가 매우 우수하고 열적, 화학적 안정성이 뛰어난 재료로서 전자제품의 소형화, 경령화, 고성능화를 위한 차세대 flexible electronic device에 적용하기 위하여 많은 연구가 진행되고 있다. 그러나 PI의 특성상, 매우 낮은 표면에너지로 인해 금속과의 접촉력이 좋지 않은 단점을 가지고 있다. 본 연구에서는, 금속박막과 PI film 과의 접촉력을 증가시키기 위해 remote-type modified dielectric barrier discharge (DBD) module을 이용하여 대기압 플라즈마 표면처리를 하였다. 실험에 사용된 gas composition은 각각 $N_2$/ He/ $SF_6$, $N_2$/ He/ $O_2$, $N_2$/ He/ $SF_6$/ $O_2$, $N_2$/ He/ $SF_6$/ $O_2$ 이다. $N_2$/ He/ $SF_6$/ $O_2$ gas composition을 이용하여 PI 표면을 플라즈마 처리한 경우, C=O 결합이 PI film 위에 생성됨으로써, 접촉각이 매우 낮게 형성됨을 관찰할 수 있었다. 이와는 반대로 $N_2$/ He/ $SF_6$ gas composition 을 사용하였을 경우에는 C-Fx 화학적 결합이 생성되기 때문에 가장 높은 접촉각이 형성됨을 관찰할 수 있었다. 특히, $N_2$ (40 slm)/ He (1 slm)/ $SF_6$ (1.2 slm) gas composition에 $O_2$ gas를 0.2 slm부터 1.0 slm까지 변화시켜가며 PI film 표면을 처리한 결과, $O_2$ gas를 0.9 slm 첨가하였을 때, 가장 낮은 $9.3^{\circ}$의 접촉각을 얻을 수 있었다. 이는 0.9 slm의 $O_2$ gas를 첨가하였을 때, 가장 많은 양의 $O_2$ radical이 생성되기 때문에 많은 양의 C=O 결합이 생성되기 때문이다. 최적화된 $N_2$ (40 slm)/ He (1 slm)/ $SF_6$ (1.2 slm)/ $O_2$ (0.9 slm) gas composition 조건에서 Ag film과 PI film과의 접촉력을 관찰할 결과, 111 gf/mm를 얻을 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2866-2871
• /
• 2011

In this study, computation method of tensile load which develops in tie-bar of reinforced earth, connection strength between tie-bar and eco-block and shear strength of the interface between two eco-blocks were verified by experiments. According to the test results of connection strength test, peak tensile load of D13 deformed bar were close to allowable tensile load of it for situation of infill with soil. Connection strengths of D10 and D13 deformed bars were greater than the allowable tensile load of those respectively for situation of infill with concrete. According to the test results of shear strength of the interface between two eco-blocks, shear resistance parameters, ${\alpha}_u$ and ��${\lambda}_u$ were evaluated as 1.7kN/m and 2$27.6^{\circ}$ respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.168-172
• /
• 2010

Superhydrophilic thin film consisted of positively charged poly (allylamine hydrochloride) (PAH) and negatively charged poly (acrylic acid) (PAA) was fabricated by a layer-by-layer (LBL) self-assembly. Glutaraldehyde (GA) was used in order to increase an adhesion hardness by amine-aldehyde reaction. The surface morphology, thickness, transmittance, water contact angle and adhesion hardness of PAH/PAA thin film with or without GA were measured. The adhesion hardness of PAH/PAA thin film with GA deposition increased over 2 times although the film thickness of PAH/GA/PAA decreased than that of PAH/PAA thin film. The increase of adhesion hardness by amine-aldehyde reaction between PAH and GA was measured by fourier transform infrared (FT-IR) spectroscopy. Fabricated PAH/PAA and PAH/GA/PAA thin films showed water contact angel under $5^{\circ}$ and high transmittance over 91.3% at 550 nm.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.8
• /
• pp.913-920
• /
• 2012

An efficient 3D finite element walking model that considers the detailed shapes of muscles, ligaments, bones, skin, and soles was developed based on a real computed tomography (CT) scan image of a foot, and nonlinear contact analyses were performed to investigate pressure changes. The highest pressure occurs at the rear bottom of the foot when standing and walking. The pressure on the outsole with a curved foot bottom surface is lessened and distributed over a wider area than in the case of a flat outsole. The result shows that a shoe sole shape optimized for diabetes patients can relieve the foot pressure concentration and prevent further worsening of symptoms.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.463-469
• /
• 2015

Purpose: A hydrogel including alginate and $CaCl_2$ extracted from seaweed was manufactured, and their physical properties were investigated. Also, its applicability as contact lenses was examined. Methods: A film-type sample used in this experiment was manufactured using 2-hydroxyethyl methacrylate (HEMA), which is the raw material of hydrogel contact lenses; azobisiobutyonitile (AIBN), which is an initiator and ethylenglycoldimethacrylate (EGDMA), which is a cross-linking agent. It was hydrated in a PBS solution for 24 hours, and an interpenetrating polymer network (IPN) was formed in 1% and 2% alginate and 1%, 3%, and 5% $CaCl_2$ solutions for 24 hours, respectively. Results: The measurement of the physical properties of the film after the IPN showed that the moisture content was 30.89~36.89%, the refractive index was 1.431~1.441, the contact angle was $62.98{\sim}80.45^{\circ}$, and the tensile strength was 2.378~4.215 ($gf/mm^2$). Also, the physical properties hardly changed as the content of alginate increased, and the moisture content decreased as the content of $CaCl_2$ increased. As a result of the IPN, the moisture content and contact angle decreased compared to those of basic HEMA, but the tensile strength increased. The tensile strength of the second IPN was higher than that of the first IPN. In the case of $CaCl_2$, for the sample polymerized for 24 hours and the second IPN sample with 2% alginate, the contact angle decreased as the content of $CaCl_2$ increased. Conclusions: In this study, the tensile strength increased as the content of $CaCl_2$ increased, and the wettability increased as a result of IPN of alginate and $CaCl_2$. The hydrogel containing the alginate and $CaCl_2$ was confirmed possible utilization as contact lens material.