• Journal of Adhesion and Interface
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2015

Hydrocarbon resins, which are defined as low molecular weight, amorphous, and thermoplastic polymers, are widely used as tackifier for various types of adhesives, as processing aids in rubber compounds, and as modifiers for plastics polymers such as isotactic polypropylene. Typically, hydrocarbon resins are non-polar, and thus highly compatible with non-polar rubbers and polymer. However, they are poorly compatible with polar system, such as acrylic copolymer, polyurethanes, and polyamides. Moreover, recently the raw materials of hydrocarbon resin from naphtha cracking had been decreased because of light feed cracking such as gas cracking. To overcome this problem, in this study, novel hydrocarbon resins were designed to have a highly polar chemical structure which material is sustainable. And, it was successfully synthesized by Diels-Alder reaction of dicyclopentadiene monomer and sorbic acid from blueberry as renewable resources. Acrylic resins were formulated with various tackifiers solution including sorbic acid grafted hydrogenated dicyclopentadiene hydrocarbon resins in acrylic adhesive and rolling ball tack, loop tack, $180^{\circ}$ peel adhesion strength, and shear adhesion strength were measured. The properties depend on the softening point and polar content of tackifiers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.178-178
• /
• 2009

전자제품의 고속화, 고집적화, 고성능이 요구되어짐에 따라 IC's 성능 향상을 통해 패키징 기술의 소형화를 필요로 하고 있어 소재나 칩 부품을 이용해 커패시터나 저항을 구현하여 내장시키는 임베디드 패시브 기술에 대한 연구가 많이 진행되어 지고 있다. 본 연구에서는 3D 패키징이 가능한 flexible 소재에 능, 수동 소자를 내장하기 위한 다층 flexible 기판 공정 기술에 대한 연구를 수행하였다. 기판제작을 위해 flexible 소재에 미세 형성이 가능한 폴리머 필름을 접착하였고 flexible 위에 후막 저항체 패턴을 퍼|이스트를 이용하여 형성하였다. 또한, 능동소자 내장을 위해 test chip을 제작하여 플립칩 본더를 이용해 flexible 기판에 접합한 후에 bonding film을 이용한 build up 공정을 통해 via를 형성하고 무전해 도금 공정을 거쳐 전기적인 연결을 하였다. 위의 공정을 통해 앓고 가벼울 뿐만 아니라 자유롭게 구부러지는 특성을 갖고 있는 능, 수동 소자 내장형 flexible 기판의 변형에 따른 전기적 특성을 평가하였다.

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.584-590
• /
• 2011

This study aimed to demonstrate the bioadhesive characteristics of gelatin biofilm to rat skin. The biofilm was manufactured from gelatin extracted from the acetic acid treated-skin of the yellowfin tuna Thunnus albacares. The bioadhesive strength of tuna gelatin biofilm was compared to that of porcine gelatin biofilm. The tuna gelatin biofilm exhibited a higher bioadhesive strength than the porcine gelatin biofilm. Gelatin biofilm was subjected to glutaraldehyde treatment at different concentrations, temperatures and pH in order to improve its bioadhesive strength. Glutaraldehyde treatment improved the bioadhesive strength of gelatin biofilm up to three-fold. The bioadhesive strength of glutaraldehyde treated-biofilm was significantly decreased by application of sodium borohydride.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.28-34
• /
• 2004

The polarizing film application exploits the unique physicochemical properties between PVA(Poly vinyl alcohol) film and CTA(Cellulose triacetate) film. However, hardly any research was aimed at improving the adhesion characteristics of the CTA film by radio frequency(RF) plasma treatment at argon(Ar) gaseous state. In this report, we deal with surface treatment technology for protective CTA film developed specifically for high adhesion applications. After Ar plasma, surface of the films is analyzed by atomic force microscopy(AFM), roughness parameter and peel strength. Furthermore, the wetting properties of the CTA film were studied by contact angle analysis. Results obtained for CTA films treated with a glow discharge showed that this technique is sensitive to newly created physical functions. The roughness and peel strength value increased with an increase in treatment time for initial treatment, but showed decreasing trend for continuous treatment time. The result of contact angle measurement refer that the hydrophilicity of surface was increased. AFM studies indicated that no considerable change of surface morphology occurred up to 3 minutes of treatment time, but a considerable uneven of surface structure resulted from treating time after 5 minutes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.27-36
• /
• 2019

The demand for a low dispersion lens with a small refractive index and a high refractive index is increasing, and accordingly, there is an increasing need for a releasable protective film with high heat resistance and abrasion resistance. On the other hand, the optical industry has not yet established a clear standard for the manufacturing process and quality standards for mold-releasing protective films used in aspheric glass lens molding. Optical lens manufacturers treat this technology as proprietary information. In this study, an experiment was conducted regarding the optimization of ion etching, magnetron, and arc current at each source and filter part, and bias voltage in FCVA (filtered cathode vacuum arc)-based Ta-C thin film coatings. This study found that compared to iridium-rhenium alloy thin film sputtering products, the coating conditions were improved by approximately 50%, 20%, and 40% in terms of thickness, hardness, and adhesive strength of the film, respectively. The thin-film coating process proposed in this study is expected to contribute significantly to the development and utilization of glass lenses, which will help enhance the minimum mechanical properties and quality of the mold-release thin film layer required for glass mold surface forming technology.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.93-100
• /
• 2020

3D printing technology enables proper objects to be made through an additive manufacturing method, but resulting in dimension deviation of the product due to contraction phenomenon as cooling melted filament resin injected from high-temperature use environment. In this research, we studied on acrylic adhesives for 3D printer build sheet in order to fabricate high-quality products with a precise shape and to well-mount without distortion. The solvent-free UV-curable acrylic adhesive formulation was designed by adding 4-acryloylmorpholine (ACMO) with high adhesion, toughness, glass transition temperature so that adhesion properties are stable at high temperature and products are easily mounted/detached from the adhesives. The designed formulation was polymerized through two-steps using post-addition of monomers. Using this, the acrylic adhesive was coated to make a film and then analyzed using various experimental techniques. As a result, the fabricated adhesive exhibited high glass transition temperature and there was little gap in peel strength before and after thermal treatment. Moreover, it was confirmed by rheological analysis that this adhesive can provide great bonding/debonding ability without distortion. We demonstrated the fabrication of a rectangular product using a 3D printing method using our acrylic adhesive as a build sheet. Mounting ability and workability were satisfactory and dimension deviation of the product was tiny. Because the product is easily detachable from the acrylic adhesive developed here than conventional build sheets, it is expected that this will provide work convenience to users who use the 3D printer.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.80-87
• /
• 2020

The purpose of this study is to investigate the physical properties and self-healing effects of hardener-free epoxy-modified mortars(EMMs) using ground granulated blast furnace slag(GGBFS). The EMMs with GGBFS were prepared with various polymer-binder ratios and GGBFS contents, and tested for strengths, adhesion in tension, water permeation and self-healing effects. The conclusions obtained from the test results are summarized as follows. The compressive strength of the EMMs with GGBFS is reduced with increasing polymer-binder ratios because of reduction of the degree of hardening in the EMMs, and is somewhat inferior to that of unmodified mortars. In the flexural and tensile strengths, the flexural strength of the EMMs is almost constant with increasing polymer-binder ratios. However, the tensile strength of the EMMs is gradually increased with increasing polymer-binder ratios. Regardless of the GGBFS contents, the adhesion in tension of the EMMs increases sharply with increasing polymer-binder ratios. The water permeation of the EMMs is remarkably reduced with increasing polymer-binder ratios and GGBFS contents. The self-healing effect of the hardener-free EMMs with GGBFS is improved with increasing water immersion period at a GGBFS content of 20%.

• Journal of Adhesion and Interface
• /
• v.24 no.1
• /
• pp.26-35
• /
• 2023

Generally, solvent-type coatings generate a large amount of volatile organic chemicals(VOC), which are carcinogenic substances, in the manufacturing process, and their use is regulated due to environmental problems. There is also the problem of resource depletion due to limited fossil fuels. Therefore, in this study, UV-curable urethane acrylate oligomers were synthesized with different contents of isosorbide, which is a biomass material, and proceeded to evaluate the physical properties of coatings. As the isosorbide contents increased, the viscosity, glass transition temperature, tensile strength, stain resistance, and pencil hardness increased, but elongation and flexibility decreased, and BOI-3 showed the best adhesion. The isosorbide content of the oligomer fixed at 20%, UV-curable urethane acrylate oligomer was synthesized according to the content ratio of polycaprolactone diol(PCL) and Ecoprol H1000(Ecoprol). As the PCL/Ecoprol content ratio increased, the glass transition temperature, elongation, and flexibility increased, but the tensile strength and pencil hardness decreased. It was confirmed that the adhesion and stain resistance increased by improving the surface bonding strength of PCL. All films of oligomers synthesized were transparent without discoloration.