• Title/Summary/Keyword: 점 흡수식

Search Result 60, Processing Time 0.027 seconds

Development of Absorption fluid with Water-Lithium bromide-Lithium nitrate system (Water-Lithium bromide-Lithium nitrate계 흡수용액 개발)

  • 오영삼;주우성;박달령;조원일;백영순;방효선
    • Proceedings of the Korea Society for Energy Engineering kosee Conference
    • /
    • 1996.10b
    • /
    • pp.190-192
    • /
    • 1996
  • 본 연구는 기존의 Water-Lithium Bromide(H2O/LiBr) 용액에 비해 부식성이 낮은 Water-Lithium bromide-Lithium Nitrate계(H2O/LiBr-LiNO3)용액의 용해도, 증기압, 점도, 표면장력 등의 물리적 성질을 조사하였다. 또한 용해도가 가장 큰 최적의 혼합 몰비를 구하여 증기압 및 점도, 표면장력등의 물성을 구함으로써 흡수식 냉온수기용 홉수제 개발의 기본 자료를 확보하였다. 이러한 연구 결과로부터 다성분 Lithium 염 혼합물계로 이루어진 흡수용액 개발의 기초자료로 이용하고자 한다.

  • PDF

A Study on Absorber in Absorption Heat Pump with Methanol-Glycerine System as a Working Fluid (메탄올-글리세린계를 작동유체로 하는 흡수열펌프에서 흡수기 연구)

  • Min, Byong-Hun
    • Applied Chemistry for Engineering
    • /
    • v.17 no.1
    • /
    • pp.111-117
    • /
    • 2006
  • The improvement of energy conservation mandates decrease consumption of fossil fuels and minimize negative impacts on the environment, which originates from large cooling and heating demand. The absorption heat pump technology has a large potential for energy saving in this respect. Adsorption heat pump is a means to upgrade waste heat without addition of extra thermal energy. The increase of absorbed amount is of great importance for absorption heat pump cycle. In this study, in order to improve the performance of absorber, the absorbers of two different types have been investigated using methanol-glycerine as a working fluid. The former was tangential feed of liquid phase without spiral tube in the absorber and the latter was with spiral tube in the absorber. The latter was found to be more effective in enhancing the mass and heat transfer to increase the absorption performance.

A Study on Improvement of Performance of Absorber in Absorption Heat Pump (흡수열펌프에서 흡수기의 성능 개선 연구)

  • Min, Byong-Hun
    • Applied Chemistry for Engineering
    • /
    • v.19 no.3
    • /
    • pp.338-344
    • /
    • 2008
  • The improvement of energy conservation is mandatory to decrease consumption of fossil fuels and to minimize negative impacts on the environment which originates from large cooling and heating demand. The absorption heat pump technology has a large potential for energy-saving in this respect. Absorption heat pump is a means to upgrade waste heat without the addition of extra thermal energy. The higher performance of absorber is of great importance for absorption heat pump cycle. In this study, in order to improve the performance of absorber, the absorber of tangential feed of a liquid phase with spiral tube has been investigated using methanol-glycerine as a working fluid. The spiral tube and tangential feeding generate the turbulence into the liquid flow while increasing the mass and heat transfer coefficients. The simultaneous heat and mass transfer were found to take place in a liquid turbulent film in the absorber with the spiral tube during the process of gas absorption. By calculating mass and heat transfer coefficients by measurement of the concentration and the temperature of each position in the absorber, the entrance was found to be more effective in enhancing mass and heat transfer.

A Study on a Resorption Beat Pump Using Methanol-Glycerine (메탄올-글리세린을 이용한 재흡수 열펌프의 열역학적 모사 연구)

  • Min, Byong-Hun
    • Journal of Energy Engineering
    • /
    • v.15 no.4 s.48
    • /
    • pp.284-290
    • /
    • 2006
  • The improvement of energy recovery is mandatory to decrease consumption of fossil fuels and to minimize negative impacts on the environment which originates from large cooling and heating demand. The absorption heat pump technology has a large potential for energy saving in this respect. Absorption heat pump is a means to upgrade waste heat without addition of extra thermal energy. In this study, resorption heat pump for energy recovery has been investigated using methanol-glycerine. The simulated calculation of theoretical thermal efficiency was performed based on the thermodynamic properties of the working fluid over various operating conditions. The thermal efficiency of higher than 0.4 was obtained by raising industrial waste heat, $70{\sim}80^{\circ}C$, by $40^{\circ}C$ in this system.

Energy Absorption Characteristics and Optimal Welding Space of Square Hat Type Thin-walled Tube (정사각 모자형 박판튜브의 에너지흡수특성 및 최적 용접간격)

  • Lee, Hyung-Yil;Kim, Bum-Joon;Han, Byoung-Kee
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.26 no.12
    • /
    • pp.2703-2714
    • /
    • 2002
  • In this work, energy absorption characteristics and optimal welding space of spot-welded square hat type tube are investigated via quasi-static crush experiments and finite element (FE) analyses. A FE model reflecting the crush characteristics is established based on the experimentally observed crush mechanisms of specimens with welding spaces (20, 30 & 45 mm) and (25,40 & 55 mm) respectively for two specimen widths (60, 75 mm). The established FE model is then applied to other crush models of widths (50, 60 & 75 mm) with various welding spaces (20, 25, 30, 40, 45, 55, 75, 150, 300 mm) respectively. We examine the energy absorption characteristics with respect to the welding space for each specimen width. The outcome suggests an optimal spot welding space of square hat type thin-walled tube. Energy absorption is also presented in terms of yield strength of base metal, specimen thickness, width, and mean crushing force of spot-welded square hat type thin-walled tube.

산업용 안전모의 충격흡수 이론

  • 최용근
    • Journal of the Korean Society of Safety
    • /
    • v.6 no.2
    • /
    • pp.37-40
    • /
    • 1991
  • 산업용 안전모는 그 기능상 耐貫通性과 衝擊吸收性이 중요하다. 이중내관통성은 별로 어려움이 없으나 충격흡수성은 무게 및 크기가 제한되고 극히 간단한 안전모의 구조에 충격을 충분히 흡수하는 Bumper작용까지 하여야 하므로 기준에 합격할수 있는 안전모를 제작하기 위하여는 여간 어려운게 아니다. 이에 論者는 일정한 무게의 추가 일정한 높이에서 자유낙하하여 안전모에 충격을 加하고서 반발할때까지의 안전모의 수직운동(변형)이 어느정도 이루어저야 하는지에 대하여 관심을 갖었다. 즉 모체든 착장체든 또는 모체와 착장체의 연결장소에서든 일정한 충격량을 받았을때 모체의정점(낙하물과 최초로 접한부분)이 수직으로 S'의 거리 만큼 움직여 주고 운동이 정지된다고 보았을때 S'과 m(추의중량), S(추가 떨어지는 높이) Fi(충격이 흡수되고 남은 충격력)와의 관계식을 뉴톤의 운동법칙으로 부터 수학적 방법으로 유도 함으로서 시험조건 및 검정 기준에 주어진 수치인 m, S, Fi,을 대입하므로서 S'을 알 수 있는바 이것을 기초로 안전모의설계및 제조된 안전모의 충격흡수 정도를 용이하게 판단 할 수있다.

  • PDF

LINE PROFILES DEPENDENT ON THE OPACITY PARAMETER IN AZ CAS (AZ Cas의 불투명도 계수에 따른 선윤곽)

  • 김경미;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • v.10 no.2
    • /
    • pp.146-151
    • /
    • 1993
  • AZ Cas는 B형의 주계열 별과 확장 대기를 가진 만기형으로 이루어진 쌍성계이다. 근성점 근처에서 Roche lobe를 채운 초거성으로부터 일어나는 질량 흐름이 미치는 효과를 구하기 위해 궤도위상 0.05와 0.09에서 불투명도 계수에 따른 AZ Cas의 선윤곽을 계산하였다. 원천 함수는 Hempe(1982)의 방법을 따라 Sobolev 근사방법을 이용하였으며 불투명도 계수가 클수록 넓은 흡수 부분을 가진 강한 선윤곽을 보였다. 궤도 위상 0.05의 부분식이세 나타난 bump는 흡수선위에 포피의 산란에 의해 생긴 방출선이 중첩되어 나타난 재방출 효과인 것으로 설명된다.

  • PDF

설비기술 - 평창올림픽 빙상장에 해양심층수 활용한 냉난방 시스템 적용

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • s.258
    • /
    • pp.68-70
    • /
    • 2012
  • 평창올림픽 빙상장에 해양심층수를 이용한 냉난방시스템 가동 방안이 추진된다. 국토해양부는 태양광이 도달하지 않는 수심 200m 아래의 해양심층수가 연중 $2^{\circ}C$ 정도를 유지하는 점을 이용해 세계 최초로 올림픽 빙상장에 한국해양연구원의 '해수냉난방시스템' 및 '해수온도차 발전' 연구개발 사업 성과를 적용한다고 밝혔다. 이번 기술이 전기에어컨이나 흡수식 냉동기 등에 적용되면 기존 시스템에 비해 에너지는 60%, 비용은 82%, 이산화탄소 배출량은 64% 줄어들게 된다.

  • PDF

A Study on Improving the Capacity of Absorbing Boundary Using Dashpot (점성감쇠기를 이용하는 흡수경계의 성능 향상에 관한 연구)

  • Kim, Hee-Seok;Lee, Jong-Seh
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.20 no.5
    • /
    • pp.629-640
    • /
    • 2007
  • In this paper an analytical study is carried out to improve the capacity of absorbing boundary using dashpot, one of the most widely used absorbing boundaries in FEM. Using 2-D harmonic plane wave equation, absorbing boundary condition is modified to maximize its capacity according to the incident angle. Validity of the absorbing boundary conditions which is modified is investigated by adopting the solution of Miller and Pursey. The Miller and Pursey's problem is then numerically simulated using the finite element method. The absorption ratios are calculated by comparing the displacements at the absorbing boundary to those at the free field without the absorbing boundary. The numerical study is carried out through comparison of displacement at the interior region and the boundary of the numerical model.

Estimating Carbon Sequestration in Forest using KOMPSAT-2 Imagery (KOMPSAT-2 영상을 이용한 산림의 이산화탄소 흡수량 추정)

  • Kim, So-ra;Lee, Woo-kyun;Kwak, Han-bin;Choi, Sung-ho
    • Journal of Korean Society of Forest Science
    • /
    • v.98 no.3
    • /
    • pp.324-330
    • /
    • 2009
  • The objective of this study is to estimate the carbon sequestration in forest stands using KOMPSAT-2 imagery. For estimating the amount of carbon sequestration, the stand biomass of forest was estimated with the total weight, which was the sum of individual tree weight. Individual tree volumes could be estimated by the crown width extracted from KOMPSAT-2 imagery. In particular, the carbon conversion index and the ratio of the $CO_2$ molecular weight to the C atomic weight, reported in the Intergovernmental Panel on Climate Change (IPCC) guideline, was used to convert the stand biomass into the amount of carbon sequestration. Thereafter, the KOMPSAT-2 imagery was classified with the segment based classification (SBC) method in order to quantify carbon sequestration by tree species. This approach, estimating the amount of carbon sequestration for certain species in stand, can be available to extend plot-based carbon sequestration to stand-based carbon sequestration.