• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.167-174
• /
• 2019

Protective facilities are the last means of ensuring the survivability of personnel and assets, and there is a greater amount of matters to consider than those of general buildings. However, the Defense Military Facilities Criteria and the Ministry of the Interior and Safety, Ordinance No. 20, are only considering the expected enemy threats. In this study, we use objective and statistical methods to refine the consideration of the required capacity of protection based on the opinions of the experts. Specifically, the study adopts the Delphi technique associating the experts related to 30 defense military facilities criteria. The first-round questions were open-ended, and it compiled the points to consider related to the bulletproof and explosion - proof design. The second questionnaire was applied as closed questionnaire with 7 points scale methods. As a result of the factor analysis on the opinions of the experts, it was confirmed that the protection requirement level was due to METT + TC.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.1
• /
• pp.105-114
• /
• 2006

Ubiquitous Sensor Network consists of a number of sensor nodes with a limited computation power and limited communication capabilities, and a sensor node is able to communicate with each other at anytime and in any place. Due to the rapid research and development in sensor networks, it will rapidly grow into environments where hmm beings can interact in an intuitive way with sensing objects which can be PDAs, sensors, or even clothes in the future. We are aiming at realizing an Unattended Secure Security System to apply it to Ubiquitous Sensor Network. In this paper, the vulnerabilities in the Unattended security system are identified, and a new protocol called OMAC-SNEP is proposed for the Unattended Secure Security System. Because the CBC-MAC in SNEP is not secure unless the message length is fixed, the CBC-MAC in SNEP was replaced with OMAC in SNEP. We have shown that the proposed protocol is secure for my bit length of messages and is almost as efficient as the CBC-MAC with only one key. OMAC-SNEP can be used not only in Unattended Security System, but also any other Sensor Networks.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.11-21
• /
• 2008

Biometrics-based user authentication has several advantages over traditional password-based systems for standalone authentication applications. This is also true for new authentication architectures known as crypto-biometric systems, where cryptography and biometrics are merged to achieve high security and user convenience at the same time. Recently, a cryptographic construct, called fuzzy vault, has been proposed for crypto-biometric systems. This construct aims to secure critical data(e.g., secret key) with the fingerprint data in a way that only the authorized user can access the secret by providing the valid fingerprint, and some implementations results for fingerprint have been reported. However, the previous results had some limitation of the provided security due to the limited numbers of chaff data fer hiding real fingerprint data. In this paper, we propose an approach to provide both the automatic alignment of fingerprint data and higher security by using a 3D geometric hash table. Based on the experimental results, we confirm that the proposed approach of using the 3D geometric hash table with the idea of the fuzzy vault can perform the fingerprint verification securely even with more chaff data included.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.138-154
• /
• 2021

'Live commerce', a brand new format of online shopping, is actively promoted in China recently. This research focused on 'Taobao-live', China's largest live commerce platform to investigate the relationships among para-social interaction, source characteristics (e.g., trustworthiness, attractiveness, and expertise), perceived ease of use, perceived usefulness, and shopping intention based on Technology Acceptance Model. A total of 536 Taobao live users were recruited through the Chinese research platform. The results showed that para-social interactivity positively affected perceived ease of use and usefulness, whereas the source characteristics had no significant effect on consumers' perceptions. Furthermore, higher perceived ease of use generated higher perceived usefulness, and both perceived ease of use and usefulness positively influenced consumers' intention to shop through Taobao live. This research can provide theoretical background for understanding the potential of live commerce platforms and help brands come up with effective online shopping strategies using live commerce platforms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1348-1354
• /
• 2020

The purpose of this study is to discover the occupational identity by examining the narrative of the life of a TVET teacher using the project method in programming fields. Teacher S, a participant in the study, started as a part-time lecturer at university and has been teaching programs for the past 20 years. As a result, six kinds of occupational identities of a programming teacher who teach by project method were found. S experienced pride and pride as a teacher through the project method. The project method served as a motive for continuous self-development to lead S to an expert. His experience as a positive teacher made him wish to maintain this life and live as a teacher as long as his health permits, even after retirement. This study has significance in exploring the structure of the occupational identity of a TVET teacher using the project method in programming fields, which have not been studied yet.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.5
• /
• pp.21-33
• /
• 2020

In this study, the program for system analysis of an expander cycle rocket engine using liquid hydrogen as a fuel was developed. The properties of hydrogen were considered by the ratio of isomers with temperature. The analysis procedure was established with the open and closed types of the expander cycle engine and the simulation methods were suggested for each component. To validation of the analysis program, we compared the performance of the engine operating point and the analysis results performed overseas for Vinci and SE-21D, which are expander cycle engines. As a result of the analysis, the main performance factors of the system, such as the mass flow of the propellant, specific thrust, and power, except for some of the inaccurate input information, showed high accuracy with an error of around 1-2%.

• Composites Research
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2022

In order to efficiently control the heat generation of electronic devices, many research has been conducted on thermally conductive composite materials. In this study, milled carbon fiber was dispersed in four solvent to investigate the relationship of carbon fiber alignment according to dispersion by solvents, and carbon fiberreinforced composite material(CFRP) was manufactured using vacuum filtration. To evaluate the arrangement of CFRP the arrangement of the prepared specimen was observed under an optical microscope, and thermal conductivity was measured by Laser Flash Analysis. The Through-plane thermal conductivity of CFRP using NMP and Ethanol was 10.79 W/mK and 10.57 W/mK respectively, which were improved by 218% and 209% compared to the In-plane thermal conductivity. The high viscosity of the solvent greatly affects the shear of the fluid, and it seemed to determine the alignment of the filler.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.48-55
• /
• 2002

The essential oils were extracted from the needles of several softwood tree species, Pinus densiflora, Pinus koraiensis, Chamaecyparis obtusa and Chamaecyparis pisifera to investigate their biological activities. The antifungal activity by hyphal growth inhibition method was determined by three wood rot fungi, one mouldous fungi, and three tree pathogenic fungi and the antibacterial activity by paper disc method and turbidiometric method by three gram positive bacteria and one gram negative bacteria, Escherichia coli, were also tested. Antifungal activity was the best in the essential oil from C. obtusa, and the following was resulted in order of P. densiflora and P. koraiensis. The essential oil from P. densiflora showed higher antifungal activity against wood rot fungi than that from P. koraiensis while the result was contrary against tree pathogenic fungi. However, the antibacterial activity was the best in the essential oil from P. densiflora, and the following was in order of C. obtusa and P. koraiensis. From these results, the variation of biological activity seemed to be due to the chemical composition of essential oils.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.41-48
• /
• 2022

This study is a study that designed in-building antennas with improved orientation to improve 5G quality in buildings as 5G is stabilized and more and more traffic is expected to occur in buildings. Instead of applying the forward arrangement of antenna elements, which is the Yagi antenna propagation orientation principle, the antenna design method of vertical arrangement applied to the base station antenna was proposed, and it was confirmed through experiments that antenna orientation increased. According to the experimental results, the directivity did not increase significantly within 10m of the separation distance from the antenna, but the directivity increased by about 3dB at the distance separated by more than 10m. Considering that the wireless environment in the building has various variables such as structure of internal structure, materials such as concrete and glass, closed space, and walls, it is expected that antenna with improved orientation can expand the scope of 5G quality improvement and maintain stable communication service in the building.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.35-40
• /
• 2022

PCVD (Plasma Chemical Vapor Deposition), a solar cell manufacturing facility, is a facility that deposits plasma generated in a chamber (NH₃, SIH₄, O₂ on a wafer. In the PCVD facility, gas movement and injection is performed in the gas cabinet, and there are many leak points inside because MFC, regulator, valve, pipe, etc. are intricately connected. In order to prevent explosion in case of leakage of NH₃ with an upper explosive limit (UEL) of 33.6% and a lower explosive limit (LEL) of 15%, the dilution capacity must be capable of allowing the concentration of NH₃ to be out of the explosive range. This study was analyzed using the CFD analysis technique, which can confirm the dilution ability in 3D and numerical values when NH₃ gas leaks from the existing PCVD gas cabinet. As a result, it was concluded that it corresponds to medium dilution and that testicular ventilation is possible through facility improvement.