• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.33-39
• /
• 2014

Domestic and international researches, about intelligent systems based on a variety of location recognitions using location information, have actively proceeded. The representative location recognition method based on PTMP(Point To Multi Point) communication uses TOA(Time Of Arrival) to calculate distances to a fixed node that you want to recognize a position. The method is used to obtain the fixed node location information from three nodes location information that is applied by the triangulation method. There are disadvantages, an infrastructure should be established at a specific space and the system established cost is needed, in the location recognition method based on the PTMP communication, In this paper, the ranging based PTP(Point To Point) location recognition method is proposed to revise the disadvantage of PTMP location recognition method. And then it is compared with PTMP communication location recognition to evaluate performance. In this way, PTMP and PTP communication location recognition systems based on ranging were constructed and tested in an indoor environment. Experiment results show that the proposed PTP location recognition method could be confirmed to improve accuracy more than 3 times when it was compared with the existed PTMP location recognition method.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1995.10a
• /
• pp.319-322
• /
• 1995

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.697-703
• /
• 2009

Cognitive radios are typically known to exploit vacant spectrum resources in order not to interfere with primary communication systems. However, cognitive radios may not be able to secure a clear spectrum band in a bustling spectrum band. Underlay spectrum sharing provides a way to cope with such a spectrum sharing problem. Cognitive radios share the same spectrum band with the spectrum licensees, i.e., primary users, by adjusting signal transmission power so as not to severely deteriorate the performance of the primary users. We propose an underlay spectrum sharing policy leveraging uplink spectrum resource to be used in a cellular network. A pair of end terminals attempts to establish a direct point-to-point link, and perform as cognitive radios in the sense that they share the uplink radio resource of other primary users. We formulate the transmit power constraints of the cognitive radios and propose a practical uplink band sharing framework. Our simulation results demonstrate that such an uplink sharing underlay direct link can enhance the throughput performance of point-to-point link with low overhead.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.105-109
• /
• 2002

초고속 인터넷 서비스가 널리 보급된 상황에서 서비스 품질과 콘텐츠의 사용 대역 증가 현상이 날로 가속화되고 있다. 이에 따라 전송속도가 거리에 제한받지 않는 광통신 기술이 품질과 대역 조건을 만족시키는 가입자 액세스망 기술로 각광 받고 있다. 현재는 점대점(point-to-Point) 광통신 기술을 이용한 광 대역서비스가 제공되고 있으나, 밀집 지역과 분산 지역 그리고 음영 지역의 각 가입자 단까지 고가의 광선로를 포설해야 하는 경제적 부담을 주고 있다. PON(Passive Optical Network) 기술은 점대점 광통신 기술에서 제기되는 경제적 비효율성을 극복하고, 더 나아가 FTTC, FTTB에서 FTTH로의 진화를 용이하게 하는 점대다점(point-to-multipoint) 광통신 기술이다. PON 기술은 ATM 기반의 B-PON(Broadband-PON) 방식과, Ethernet 기반의 E-PON(Ethernet-PON) 방식이 현재 상용화 단계에 있으며, 이 방식들은 상하향 데이터 전송을 위해 단일 파장을 사용하고 있다. 본 논문에서는 PON 기술동향 및 발전전망에 대해 알아보고, B-PON 및 E-PON 기술 분석한 뒤, 국내 환경에 가장 적합한 서비스 제공 방안을 제안하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1329-1338
• /
• 2011

This paper proposes an algorithm and hardware architecture for a broadcast communication which has the worst bottleneck among multiprocessor using distributed memory architectures. In conventional systems, collective communication is converted into point-to-point communications by MPI library cell without considering the state of communication port of each processing node which represents the processing node is in busy state or free state. If conflicting point-to-point communication occurs during broadcast communication, the transmitting speed for broadcast communication is decreased. Thus, this paper proposed an algorithm which determines the order of point-to-point communications for broadcast communication according to the state of each processing node. According to the state of each processing node, the proposed algorithm decreases total broadcast communication time by transmitting message preferentially to the processing node with communication port in free state. The proposed MPI unit for broadcast communication is evaluated by modeling it with systemC. In addition, it achieved a highly improved performance for broadcast communication up to 78% with 16 nodes. This result shows the proposed algorithm is useful to improving total performance of MPSoC.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.705-708
• /
• 2005

In this paper, we propose a method that search the sweet spot of antenna beam, and keep it for fast speed transmission in millimeter wave on point-to-point link We use TDD(Time Division Duplex) as transfer method, and it transfers the control data of antenna. The proposed method is composed of two ADALINE which used the parallel. The efficiency of the proposed method is verified by means of simulations with white Gaussian noise and not on point-to-point link.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.437-444
• /
• 2010

The audio data have been communicated using analog methods or simple protocols. However, with the advent and improvement of various multimedia functions, many audio devices have been integrated into a mobile handset in which interconnection lines are very complicated. Conventional point-to-point connections such as $I^2S$ and PCM demand more power consumption whenever more devices are attached. In this paper, we design a common bus digital audio interface that communicates with only two wires and employs the clock gear method to reduce bus power consumption. The comparison results show that the proposed common bus connection can reduce more than 30% of power consumption as compared with point-to-point connection if more than three devices are connected.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10a
• /
• pp.172-174
• /
• 2000

본 논문에서는 CAN 기반의 분산 제어 시스템을 위한 환경에 특화된 CORBA인 CAN-CORBA의 설계와 구현에 대하여 기술한다. CAN-CORBA는 예약 구독 기반의 그룹 통신과 CORBA의 전통적인 연결 기반 점대점 통신을 모두 지원한다. 또한 내장형 ORB간 통신 프로토콜인 EIOP를 사용하여 메시지 전송량을 획기적으로 줄였다. CAN-CORBA는 서울대학교에서 개발한 실시간 운영체제 mArx에 완전히 구현되었다. 다양한 경험과 실험 결과는 CAN-CORBA가 극심한 자원 제약 한계를 갖는 분산 내장형 제어 시스템을 개발하는데 적합함을 보여주었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1112-1128
• /
• 2012

In cognitive radio networks, secondary users are allowed to utilize the channels currently not occupied by primary users opportunistically. Secondary users can communicate with each other using the commonly available channels (common channels) which may change dynamically based on the activity of the primary users. Even though many studies have dealt with cognitive radio behaviors, the detailed procedures for common channel configuration have not been paid much attention. In this paper, the fast and reliable dynamic common channel setup and reconstruction method for the point-to-point communications in military cognitive radio networks is proposed. The detailed time parameters are considered for common channel setup and reconstruction, such as the packet exchange time, channel request waiting time, and rendezvous time. Through numerical analyses, the delay and throughput performance of the proposed method is derived and evaluated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.722-729
• /
• 2005

Ethernet passive optical networks (EPONs) are an emerging access network technology which has a point-to-multipoint topology. EPONs operate point-to-multipoint in the OLT-ONU direction, and point-to-point in the ONU-OLT direction. To support point-to-point emulation and shared LAM emulation, EPONs use multi-point control protocol (MPCP). The MPCP uses logical link identification (LLID) field for frame tagging and filtering between the OLT and ONUs. In this paper, I propose logical-group identification (LGID) for logical link-based multicasting or VLAN services in EPONs. Using LGID with new frame tagging and filtering rules, EPONs support differentiated multimedia broadcasting or multicasting services. Additionally, EPONs can support logical link-based VLAN services that divides ONUs into several subsets.