• 지질공학
• /
• 제11권2호
• /
• pp.163-174
• /
• 2001

탄성파 굴절법 탐사를 이용한 지반조사시 탐사 결과로부터 표토층 및 풍화대 깊이, 연암 또는 기반암의 심도, 단층 파쇄대나 연약지반의 위치 및 규모, 지질경계 등을 파악, 지하 속도분포를 도출함으로서 Rippability 등 지반 공학적 특성의 정량적 평가가 가능하다. 이를 위하여는 양질의 자료 취득은 물론 조사 목적과 탐사심도에 맞는 측선길이 및 배치, 수진점과 진원점 감격 및 배치, 지형기복 여부 등 현장조사 파라미터의 설정이 중요하다. 택지개발 지역의 절토 사면부에서는 수진점 간격을 3∼5m 정도가 적합하며 측선의 배열은 주측선과 주요 지점에서 이에 사교하는 부측선 배치가 필요하다. 굴절법 토모그라피 해석기법의 적용시, 조사장비의 가용 채널 수에 1/4 이상의 진원점으로부터 자료를 취득해야 지하구조 해석시 지형의 영향에 의한 왜곡현상을 감소시킬 수 있다. 편마암 지대인 절토사면부에서 시추자료와 비교하여 탄성파 속도 토모그램에 의한 지반분류는 토사 700 m/s 이하, 풍화암 700∼1,200m/s, 연암 1,200∼1,800m/s 이고 굴삭난이도(리퍼빌리티)는 리핑암 700∼1,200m/s, 발파암 1,800m/s 이상으로 나타났다.

• 한국지반공학회논문집
• /
• 제24권12호
• /
• pp.5-12
• /
• 2008

지반의 지지력을 증가시키는 보강토공법은 일반적으로 산악지대에서 시행되는 건설공사에 쓰여지는데, 보강토 옹벽의 높이가 일반 평지의 성토구조물보다 상당히 높아지며, 성토도로의 시공이나 고속철도 등과 같은 높은 상재하중을 지지하여야 할 경우에는 지반강성을 크게 향상시킬 수 있는 공법의 적용이 요구된다. 또한, 절토공사 현장의 환경문제 및 대지경계 등의 이유로 원지반의 절취량을 최소화 할 수 있는 공법이 지속적으로 요구되고 있으며, 이를 만족하기 위한 많은 공법들이 개발되고 있는 실정이다. 그러나, 일반적인 보강토 옹벽의 경우 옹벽 높이의 $60{\sim}80%$정도에 해당되는 보강재 길이가 요구되어 절토현장에 적용하는데 어려움이 있다. 또한, 근래에 들어 용지경계 확보와 성토구조물의 안정성 확보 등 제한적인 범위에서 적용되던 보강토 옹벽공법이 추가 보강재를 병행, 사용함으로써 절토공사 현장에도 점차 적용되는 사례가 증가하고 있다. 본 연구에서는 보강토 옹벽의 보강재 길이를 줄이는 대선에 쏘일네일링 공법과 같은 사면보강공과 연결하여 충분한 저항력을 확보할 수 있도록 쏘일네일과 강재스트립으로 보강된 복합보 강토옹벽 시스템의 설계 및 시공사례를 소개하고 실제 현장에서 측정된 계측자료를 통해 복합보강토옹벽 시스템의 적용 가능성을 검토하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.23-32
• /
• 2003

In order to reduce the damage of property and the loss of lives caused by slope failure, the development of an efficient cut slope management system and the proposal of an appropriate countermeasure are required. However, recognizing the cause of slope failure and proposing the adequate countermeasure for failure are difficult tasks because slope failure is occurred by many complicated failure reasons. Therefore, the cut slope database system is developed in this study for the effective tool which Is able to analyze the characteristics and relationship for reasons of slope failure. In addition, this system contributes to the curtailment of governmental budget spending for countermeasures of slope. Moreover, GIS system will be adopted to the database system and the investigation of characteristics relationship between one and another area is in progress.

• 한국환경복원기술학회지
• /
• 제18권5호
• /
• pp.27-36
• /
• 2015

This study was conducted to grasp the effect of afforestation of cut slope using coir blocks on the improvement of scenery and the management of non point pollution source. Total four experimental tanks such as general soil slope, coir blocks, installation slope, slope refilling the inside of coir blocks slope with pebble, slope refilling the inside of coir blocks with soil and plant were installed, pollution source water was supplied and the possibility of reduction management of non point pollution source was analyzed at four items of COD, SS, T-N, T-P and main results drawn from this study are as follows. In conclusion, biodegradable materials like coir blocks and soil and plant layers are judged to be helpful in reduction management of non point pollution source inflowing to water space from land area. Thus, the reduction of non point pollution source occurring at land area is thought to be fully controlled at the cut slope, the space prior to inflowing to water ecological space like a stream or a swamp area.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1274-1281
• /
• 2010

Cut Slope Management System(CSMS) is a systematic maintenance and management system designed to prevent the collapse of cut slopes located along national roads and to minimize damages caused by slope collapse related accidents. In order to implement a maintenance and management system that will ensure safe road operation, the Korean government has started the inventory of cut slopes and developed a cut slope database since 2006. The study on the application of cut slope database is on-going and part of this study is the development of cut slope database management system (Slope-navi) using GIS technology and navigation system for the effective and efficient cut slope management using Information Technology. Using the Navigation Cut Slope Data Management System the previously developed database was checked and verified. The converted cut slope inventory data and field investigation reports of about 20,000 cut slopes were loaded in the navigation map. Through the development of the navigation's cut slope data search system, a systematic and efficient cut slope database management and operation in the prevention of slope collapse and remedial measure selection was established.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.652-661
• /
• 2006

The cut slopes in Jinju area constitute the Cretaceous Sedimentary rock which is one of the most poor ground conditions. The geological rocks of the cut slopes are correlated with Jinju Formation. Most of the rocks consist of Black Shale layer, but the lower parts consist of Alkorsic White Sandstone. So, It is characteristic of the differential weathering due to the difference of rock species. Moreover, vertical joints which concentrate on the released rock and weak rock fragments are accompanied with minor faults. We make out face mapping about each slopes through the detailed field-study and deduce RMR and SMR from the field data. The strength properties of rocks were obtained from references, indoor tests, and Back Analysis method. And, choosing properties were used in the stability analysis as stereographic projection and limit equilibrium analysis and we establish the countermeasures for the cut slopes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.732-737
• /
• 2006

The facility diagnosis technique of past subjective judged the technical expert and interpreted stably mainly. The facility the periodical civil official becomes indispensability consequently with the law and the system and objectivity inspection which relates with a this and development of diagnosis technique were necessary. Currently the evaluation elements which relate with an inspection and diagnosis technique depended to the subjectivity of each facility quality, data statistics, diagnosis know-how, various circumstance and the technical expert and the evaluation item came to decide. But the evaluation score distribution of marks of each item depended plentifully in data analysis result and experience. The past method is weak in logically because the objection theoretical background and basis are insufficiency. Consequently in order to apply a data analysis result and an experience logically, it used AHP(Analytic Hierarchy Process) method from this research. It is visible with the fact that the application result reconfirmation and complement process will be necessary the technique which is suitable in the multi facility management. Also it is expected with the fact that the application characteristic from the next relation technique will be excellent.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.725-730
• /
• 2005

In case of the national roads which is opened in the past, there are carried out the expansion and improvement for enlargement of the traffic demand by industrial development and safety road operation to narrow of road width and serious change of the road alignment with effect of topography and graphical features of a mountain. A protection method using vegetation in the cut-slope has been constructed for harmony of ambient environment after cutting the slope recently. But it requires a study because the surface lose and the failure have been occurred in the large cut-slope which is covered by vegetation. In this study it was presented a countermeasure and examined a stability of contained uncertainty in the cut-slope according to the failure example of the cut-slope which is covered by vegetation. The additional research will be necessary against the development of the investigation technique which executes the stability investigation of the cut-slope which is covered by vegetation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.831-837
• /
• 2005

In this study, a computer program to predict the behavior of laterally loaded single pile and pile groups was developed by using a beam-column analysis in which the soils are modeled as nonlinear springs by a family of p-y curves for subgrade modulus. The special attention was given to the lateral displacement of a single pile and pile groups due to the soil condition and the cap rigidity. The analysis considering group effect was carried out for $2\;{\times}\;2\;and\;3\;{\times}\;3$ pile groups with the pile spacing 3.0B, 4.0B and 5.0B. Based on the results obtained, it is found that the overall distributions of deflection, slope, moment, and shear force in a single pile give a reasonable results irrespective of cap connectivity conditions. It is also found that even though there are some deviations in deflection prediction compared with the observed ones, the prediction by present analysis simulates much better the general trend observed by the centrifuge tests than the numerical solution predicted by PIGLET.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.643-650
• /
• 2004

In general, slope failures are occurred by the interaction among various factors(slope shape, hydraulic condition, and geologic condition, etc.). In the area where has a heavy rainfall, a great portion of slope failures are caused by seepage increasement with suitable failure condition. Many studies have been performed to find the cause of large-scale failures. In this study, three Cut-Slope failures caused by typhoon 'MAEMI' were investigated to find out factors causing large-scale slope failures. It was confirmed in this research that major reason of slope failures was the weak layer working along with other unstable factor. The large-scaled investigation concerning Cut-Slope will be needed to find out the Weak Layer.