• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.80-80
• /
• 2023

인구증가와 경제발전은 도시화를 촉진시키며 도시에서 물과 에너지 사용량을 급격히 증가시켰다. 도시 물순환 시스템에서 용수를 공급하기 위해 에너지가 사용되고 에너지 발전을 위해 물이 필요하듯이, 물과 에너지는 긴밀한 연결 관계를 가지고 있다. 도시에서 이러한 자원을 효율적으로 관리하기 위해서는 물과 에너지 사이에 존재하는 복잡한 관계를 고려하여 분석할 필요가 있으나 기존의 도시 물관리는 부문별로 독립된 접근방식에 의존하기 때문에 이를 설명하기는 어려웠다. 이러한 한계점을 극복하기 위해 부문 간 존재하는 복잡한 관계를 반영하고, 상호연관성 및 영향 효과에 대해 분석 가능한 통합적 접근방식인 넥서스 접근법이 점차적으로 활용되고 있다. 본 연구에서는 넥서스 관점에서 국내 광역지자체별 상수시스템의 물-에너지 관계를 분석하고, 이를 바탕으로 도시 물관리 전략 및 실행계획을 제시하는 것을 목적으로 하였다. 넥서스 관점에서 상수시스템의 물-에너지 이용을 분석하기 위해 2011년부터 2020년까지 10년간의 자료를 활용하여 광역자자체별 넥서스 프로파일링을 수행하였다. 분석 범위 설정, 자료 처리, 기본 경향 분석, 영향 요인 도출, 스냅샷 및 궤적 분석, 원인 도출의 절차로 진행되는 프로파일링을 통해 상수시스템에서 물 사용량과 에너지 사용량의 현황과 거동을 파악할 수 있었다. 인구변화, Lpcd(litres per capita per day) 변화, 원수 수입량 변동과 같은 외부 영향(부산, 대구, 인천, 울산, 세종), 시스템 개선 등을 통한 도시여건 개선(광주), 입력자료의 오류 또는 부정확성(대전, 울산, 제주)과 같은 도시별 물-에너지 사용량 변화에 대한 주요 원인을 도출할 수 있었다. 그리고 이를 바탕으로 각 광역지자체별 향후 추세 및 개선방안을 제시하였다. 본 연구에서는 넥서스 관점에서 국내 통계자료를 활용하여 광역지자체별 상수시스템의 물-에너지 관계를 분석하여 국내 도시 상수시스템 내 물과 에너지 사용에 대한 과학적 근거를 제공하였다. 이를 통해 향후 각각의 도시 여건에 맞는 실제 정책 수립에 활용될 수 있을 것으로 기대된다.

• Journal of Korea Water Resources Association
• /
• v.47 no.10
• /
• pp.853-865
• /
• 2014

Hydrologic dam risk analysis depends on complex hydrologic analyses in that probabilistic relationship need to be established to quantify various uncertainties associated modeling process and inputs. However, the systematic approaches to uncertainty analysis for hydrologic risk analysis have not been addressed yet. In this paper, two major innovations are introduced to address this situation. The first is the use of a Hierarchical Bayesian model based regional frequency analysis to better convey uncertainties associated with the parameters of probability density function to the dam risk analysis. The second is the use of Bayesian model coupled HEC-1 rainfall-runoff model to estimate posterior distributions of the model parameters. A reservoir routing analysis with the existing operation rule was performed to convert the inflow scenarios into water surface level scenarios. Performance functions for dam risk model was finally employed to estimate hydrologic dam risk analysis. An application to the Dam in South Korea illustrates how the proposed approach can lead to potentially reliable estimates of dam safety, and an assessment of their sensitivity to the initial water surface level.

• Journal of the Korean Institute of Gas
• /
• v.17 no.1
• /
• pp.56-66
• /
• 2013

The gas production plants supply the inert gas to production plants for maintaining safe operation and also supply combustible, flammable, explosive and toxic gases as functions of basic materials needed for producing chemical goods. In addition, gas plants need to be safe and reliable operation because they are operated under high temperature, high pressure, cryogenic and catalytic reactions. As these plants have a complex process in operation, there has been a risk that major industrial accidents such as a fire, explosion and toxic gas released, also risks of asphyxiations by inert gases and burns caused by high temperature and cryogenic substances. This study is to carry out the semi quantitative risk assesment method which is the generic risk analysis (GRA). This method is applied to air separation unit(ASU) to identify its initial risk, safety barriers, residual risk and elements important for safety(EIS). The result of this study, suggested the management tools and procedures of implementation for EIS management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.289-296
• /
• 2021

The Korean construction industry has been implementing G-SEED, a certification system that evaluates the environmental properties of buildings for the purpose of reducing environmental burdens such as energy and resource consumption and pollutant emissions. Also, creating a pleasant environment in general is one more purpose of G-SEED certification system. However, G-SEED certification in practice is difficult and time consuming due to the complexity of the certification acquisition process coupled with little economic consideration for the materials of each certification item. Therefore, in this study, we present a model for the optimal selection of materials and economic assessment using a genetic algorithm. The development of the model involves building a material database based on life-cycle costing (LCC) targeted at "Application of Indoor Air Pollutant Low Emission Material" from G-SEED. Next, the model was validated using a real non-residential building case study. The result shows an average cost reduction rate of 74.5 % compared with the existing cost. This model is expected to be used as an economically efficient tool in G-SEED.

• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.139-150
• /
• 2006

A schematic map is a special purpose map which is generated to recognize it's objects easily and conveniently via simplifying and highlighting logical geometric information of a map. To manufacture the schematic map with road, label and icon, we must generate simplified route map and replace many geometric objects. Performing a give task, however, there are an amount of overlap areas between geometric objects whenever we process the replacement of geometry objects. Therefore we need replacing geometric objects without overlap. But this work requires much computational resources, because of the high complexity of the original geometry map. We propose the schematic map generation system whose map consists of icons and label. The proposed system has following steps: 1) eliminating kinks that are least relevant to the shape of polygonal curve using DCE(Discrete Curve Evolution) method. 2) making an evenly distributed route using CVT(Centroidal Voronoi Tessellation) and Grid snapping method. Therefore we can keep the structural information of the route map from CVT method. 3) replacing an icon and label information with collision avoidance algorithm. As a result, we can replace the vertices with a uniform distance and guarantee the available spaces for the replacement of icons and labels. We can also minimize the overlap between icons and labels and obtain more schematized map.

• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.228-233
• /
• 2013

It has been continuously generated the requirement for the replacement of the main components such as a steam generator due to the deterioration of the nuclear power plant all around the world. Also, a large amount of radioactive metal was generated during the decommissioning in a short period. It is required to make an accurate measurement of the residual radioactivity for recycling the metal waste for releasing from regulatory control. In planning the measurement procedures, the influence of geometry, self-absorption, density and other relevant factors on the representativeness of the measurements should be considered for the decommissioning metal waste. In this study, the method for measurement procedures, the source term evaluation, the ways to secure representative samples, the measurement device for wide area and the self-absorption correction factors for different density were evaluated. The metal samples for measurement were prepared for securing the simple geometry and representative by melting process. The developed correction method for measuring the radioactivity a variety density of metal waste could improve the reliability of the evaluation results for clearance.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2280-2288
• /
• 1997

An agent is a software element that, by making use of knowledge and inference, performs tasks on behalf of the user. In general, an agent has the properties of autonomy, social ability, reactivity, and durability. Many researches on agents are more and more aiming at the multiagent systems since it is not sufficient to let a single agent do the whole things, especially in a real world where tasks require many diverse activities. However, the multiagent frameworks still have some limitations in the processing of user queries that are often ambiguous and goal-oriented. Also, a series of procedures or plans could not be generated from a single query directly. In order to give more intelligence to the multiagent framework, we propose a method of extending the framework with a plan generation module. The open agent architecture (OAA), which is a multiagent framework that we developed, is integrated with UCPOP, which is a AI planner. A travel schedule management agent (TSMA) system is implemented to explore the effects of the method. The extended system enables the user to only specify goal-oriented queries, and the plans and procedures to satisfy these goals are generated automatically. Also, this system provides a cooperative and knowledge-sharing environment that integrates several knowledge-based systems and planning systems that are distributed and used independently.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.116-123
• /
• 2013

In mobile healthcare applications, the reliable transmission of the bio-data is very important. In this article, we present a reliable bio-data transmission technique for mobile healthcare monitoring service at 6LoWPAN multi-hop wireless networks. In particular, we expand IEEE 11073-20601 protocol, and propose the reliable path construction for 6LoWPAN aimed to reliably provide mobile healthcare service over wireless sensor network, using IPv6 network. 6LoWPAN is recognized possibility because it is agree with sensor network by raising Adaptation layer on the MAC layer to transmit IPv6 packets. In this article proposed minimize the algorithm complexity and reliability routing protocol because the 6LoWPAN devices are suitable for low cost, small size and battery that can be used to health care system environment. And detailed procedures and algorithms are presented. We the proposed method to prove the superiority of using NS-3 for compareing with AODV protocol.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.121-129
• /
• 2013

As more than 80 percent of tasks within corporations are performed through information systems, they have become large in scale and complicated, which make the range of the system users diverse and specialized. and as recent corporate strategies focus on the real-time environment in businesses, the organizational structure within companies tend to show frequent changes. In order to ensure the business continuity in this environment, the most important aspect is to prevent incompleteness of business by narrowing the gap of understanding of business process between the system users and the maintenance managers. In order to address this problem, this study suggests a modeling method that utilizes business scenarios reflecting actual business rules and procedures which ultimately transforms the optimized and standardized form of business scenarios into the actual software maintenance activities. This modeling method improves reusability and usability through the repeated feedback mechanism for modified software by leading to gradual fine-grained process. The feasibility of this is to be proven by applying the modeling method to the real business environment.