• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.209-210
• /
• 2010

• 한국정밀공학회지
• /
• 제5권1호
• /
• pp.50-62
• /
• 1988

An experimental investigation of the machining characteristics of compact vermicular cast iron whose matrix were formulated under two kinds of annealing conditions has been conducted. The various characteristics of the machinability of CA cast iron depending upon its matrix and cutting condition have been obtained from the experiment. The results are as follow. As depth of cut increases, the shear stress slightly decreases in order $P_1, \P_2, \P_3$ which are classified by ferrite matrix of CV cast iron. As depth of cut increases, the normal stress increases, and annealing effect in heavy cutting is smaller than that in light cutting. The cutting energy slightly decreases, as depth of cut increases and the effect of annealing on cutting energy in light cutting is higher than that in heavy cutting. The cutting equation in this study are as follow. $P_1\:\2{\phi}\ + \1.49({\beta} - {\alpha} )=84^{\circ}$ $P_2\:\2{\phi}\ + \1.36({\beta} - {\alpha} )=82^{\circ}$ $P_3\:\2{\phi}\ + \1.34({\beta} - {\alpha} )=79^{\circ}$ Machining constants in this study for $P_1, P_2, P_3$give $74^{\circ} , 66^{\circ}, 61^{\circ}$ Tool wear increases as depth of cut increases, and decreases as ferrit matrix increases.

• 한국기계가공학회지
• /
• 제20권10호
• /
• pp.9-18
• /
• 2021

The cutting force in a cutting simulation is determined by the cutting conditions, such as cutting speed, feed rate, and depth of cut. The cutting force changes, depending on the material and cutting conditions, and is affected by the heat generated during cutting. The physical properties for predicting the cutting force use constitutive equations as functions of the hardening term, rate-hardening term, and thermal-softening term. To accurately predict the thermal properties, it is necessary to accurately predict the thermal-softening coefficient. In this study, the thermal-softening coefficient was determined, and the cutting force was predicted, using the response-surface method with the cutting conditions and the thermal-softening coefficient as factors.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.74-81
• /
• 1987

본 논문에서는 구상흑연주철을 어니일링하여 퍼라이트기지와 페라이트기지의 양을 조정하므로서 절삭성이 어느 정도 향상되는가를 실험검토하였다. 제일보에서는 퍼라이트기지가 페라이트기지로 변화할 때에 절삭비, 전단각 및 절삭저항에 어떠한 영 향을 주는가를 검토하였고, 본보에서는 기지조직의 변화가 전단응력 및 절삭에너지에 미치는 영향을 검토하였으며 각조직에 대한 절삭방정식과 절삭정수를 결정하였다.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.29-35
• /
• 2006

Various types of elliptical motions are generated by PZT mechanism which is composed of two parallel piezoelectric actuators. Elliptical vibration cutting(EVC) is obtained by attaching single crystal diamond cutting tool to the mechanism, and V-grooving for Brass and Aluminum is carried out by applying the EVC. It is experimentally observed that the cutting force in the process of the EVC reduces compared to the ordinary non-vibration cutting, which is due to the decrease of undeformed chip thickness and frictional force between the tool and chip. Ultrasonic elliptical vibration cutting(UEVC) suppresses burr formation and decreases cutting force still more, so UEVC makes it possible to enhance the shape accuracy of machined surface.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.941-946
• /
• 2018

Currently, due to the development of technology, the industry is proceeding with the development of advanced materials with high performance such as light weight, heat resistance and electric conductivity. Carbon Fiber Reinforced Plastics (CFRP) is an excellent material with high heat resistance, high strength and thermal shock resistance. In order to obtain excellent hole shape in CFRP drilling, we compared the modified drill shape and the conventional carbide drill. On the other hand, we determine the proper helix angle by observing the CFRP surface according to the helix angle at the trimming of the end mill proceeding after the hole machining.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.211-212
• /
• 2010

• 한국산학기술학회논문지
• /
• 제18권1호
• /
• pp.107-114
• /
• 2017

터보차저는 배기가스로 구동되는 엔진 과급기를 말하며, 배기에너지를 이용하여 배기통로에 연결된 터빈의 회전력을 변화시켜, 혼합 가스의 충전효율을 높여 출력과 연비를 향상 시키는 부품이다. 이러한 목적에 따라 과급을 조절해주는 것이 중요하며, 핵심 부품 중 노즐 슬라이드 조인트가 있다. 소재는 현재 오스테나이트 계 스테인리스강으로 높은 내열성과 내식성 등의 우수한 기계적 성질을 이용하고 있다. 그러나 절삭성이 나쁘기 때문에 절삭가공에 의해 복잡한 형상의 제품을 만드는데 어려운 점이 많다. 현재 노즐 슬라이드 조인트의 가공방법은 금속분말 사출성형후 치수정밀도를 위해 절삭가공을 행하고 있다. 따라서 본 연구에서는 Nitronic 60을 이용하여 터보차저 과급유량을 조절해주는 노즐 슬라이드 조인트의 제작 공정에서 절삭가공이 필요 없는 정형가공 공정을 제안하기 위하여, 기계적 특징에 영향과 연관이 있는 소결온도, 제품의 응력 및 변형률, 형상과 관련이 있는 모따기 펀치각도 및 펀치의 곡률반경을 설계변수로 선정하였다. 그에 따라 유한요소해석과 실험계획법인 다구찌법 및 SN비를 이용하여 가장 좋은 공정 조건을 제안하였다. 최종제품과 유한요소해석 결과의 상대밀도 및 정수압을 비교하여 경향이 일치함을 알 수 있었다. 따라서 다구찌법을 이용한 금속분말의 성형공정 설계에 유용하게 적용할 수 있을 것으로 판단된다.

• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1910-1920
• /
• 1993

An experimental study to investigate the unconventional chip formation called triangulation of chip in cutting with a SPRT (self-propelled rotary tool) is performed using acoustic emission (AE) signal analysis. In doing that, a quantitative model of the AE RMS signal in triangulation with a SPRT is first developed. The predicted results from this model show good correlation between the AE RMS signal and the general characteristics of triangular chip formation. Then, effects of various process parameters such as cutting conditions (cutting speed, depth of cut, oblique angle and normal rake angle) and the work material properties on the chip formation in cutting with a SPRT are explored. Special attention is paid to the work material properties which are found to have significant effects on triangulation.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.241-248
• /
• 2000

Increased complexity of products and their manufacturing processing demans higher quality control and monitoring than ever before. Therefore, flexible automatization or flexible manufacturing systems (FMS) offer numerous advantages over alternative manufacturing methods. In this state, a in-process monitoring is one of the important flexible automation system. And as use of NC and CNC machine tool has been increasing, cutting work has automating and it is necessary to develop the automatic production system combined a couple of machine tool. Thus, in this paper to search examination it can measure the tool wear and the tool life and can be more practical research subject.